Water tanks. Drinking water tank AquaTech ATV Water tank aquatech atv 200

Aquatech ATV plastic water tank (blue)

Manufacturer: Aquatech, Russia
Capacity: 200l. - 5000l.
Joining: 1"
Drainage: 3/4"

Water tanks of the ATV series are made from high-quality food-grade stabilized polyethylene. This material has light-protective properties, which allows you to protect liquids in the tank (for example, drinking water) from blooming. Operating temperature from -40 to +60 degrees.
Tanks of the ATV series can be used for storing water (including drinking water), liquid and bulk food products, chemicals.
It's the tanks blue ideal for use with drinking water, thanks to a special additive in the tank material. The material of the walls of the blue tank allows, with sufficient lighting, to visually control the degree of filling of the tank.

Structurally, water tanks of the ATV series are made in the form of a vertical cylinder with a flat base and are available in the widest range of standard sizes: 200, 500, 750, 1000, 1500, 2000, 3000, 5000, 10000 liters. The tank volume in liters corresponds to the model designation.

The shape stability of the ATV series tanks in the empty and filled state is ensured by the material and special shape of the tanks.

At the top horizontal part of the tank there is a large diameter screw cap for inspection. The handle of the inspection lid has a built-in breathing valve with the ability to manually open/close, which is necessary when filling and emptying the tank.

On one of the sides, four holes are made on the side surface of the tank, in three of which plastic threaded fittings with external thread. At the bottom there is a 1” fitting and a 3/4” fitting for connecting, for example, drainage devices and connections with other tanks.
In the upper part there is a 3/4” fitting (for example, for overflow) and a D32 mm technological hole for installing a 1” mechanical float valve for automatic filling of the tank. Each ATV series tank up to 2000 liters inclusive is equipped with such a float valve. Tanks of larger volume are equipped with such a valve as an option.

If necessary, additional holes can be made in the side surfaces of the tank and threaded fittings of the required diameter can be installed. These fittings are also supplied separately.
Tanks in this series have a cylindrical shape and the largest range of produced volumes. Ideal for use in plumbing and heating systems, as well as food and beverage applications. chemical industries. Made from food grade polyethylene, resistant to aggressive liquids.

Technical characteristics, main parameters and dimensions of water tanks Aquatech ATV series (blue)

Plastic tanks of different shapes

Please note that this tank is NOT supplied with float valve. Don't forget to order it!
You will need a float valve if the tank will be filled from a water supply source that has at least minimal water pressure.
If you want to fill the tank using well pump, then you will need float switch, which will turn off the pump when the tank is full.

The ATV 200 water tank with float is designed for clean and industrial water needs. It may also contain:

• food products;
• liquids containing alcohol;
• various powders;
• substances in the form of granules.

Device

Wear-resistant material is used in production high quality, to which titanium dioxide is added. The light-protective characteristics of the container eliminate the possibility of its contents blooming.

Thanks to the use of this production technology, the Aquatech ATV 200 water tank is monolithic, without the formation of welds and with a uniform wall thickness of 8-9 mm.
All this allows you to get a more durable and reliable product.
Due to the stiffening ribs it does not deform.

The Aquatech ATV 200 tank comes complete with the following items:

• special screw-on lid, equipped breathing valve, operating during filling and emptying. It covers the neck located on top, the diameter of which is 350 mm. It also provides long-term storage without loss quality characteristics;
• three threaded fittings. One diameter 3/4" located in the upper part and is intended for connecting the supply line. Two others size 1" and two 3/4" are located below on the same wall and are used for drainage and intake.

Application

The ATV 200 tank with float is suitable for various tasks: as an intermediate storage tank for water supply country house, irrigation personal plot, for agricultural needs, for storing reserve stock and for other purposes.

The ATV 200 tank is available in two color variations: black and blue.
First ideal option to heat water naturally, that is, under the influence sun rays, while protecting it from ultraviolet radiation.
In addition, the tank is not destroyed by prolonged exposure to UV rays. Can be used for organization summer shower. The ATV 200 tank with blue float is perfect for drinking water. As a rule, it is installed indoors.

The temperature of the working environment should not rise above 60 °C and fall below -20 °C. The ATV 200 water tank cannot be used under pressure, only under pressure from a liquid column.

It is prohibited to use the ATV 200 tank for storing or transporting aggressive and dangerous liquids.
All tanks undergo quality control at the factory.
The service life of the product is 50 years, subject to the conditions of maintenance, installation and operation.

You can buy an Aquatech plastic tank of any volume

• Dimensions

  • Width(cm): 81.0
  • Height (cm): 61.0
  • Depth (cm): 81.0

• Configuration

  • Tank version: Vertical
  • Tank shape: Cylindrical
  • Neck diameter, mm: 350
  • Diameter of technological hole, mm: 34
  • Color: blue-white
  • Float: +
  • Inspection cover: +

• Performance characteristics

  • Displacement: 200
  • Features of operation: for water
  • Model features: Suitable for use in plumbing and heating systems, as well as in the food and chemical industries

• Materials

  • Material: food grade polyethylene

Specifications subject to change by the manufacturer without notice

Equipment

• 1 piece Warranty card:
• 1 piece Operating instructions:
• 1 piece Inspection cover with breather valve:
• 3 pcs. Threaded fittings:

Contents are subject to change by the manufacturer without notice.

Product Description

Water tank Aquatech ATV-200 BW - with float, blue and white. The outer layer is blue, the inner layer is white, and the polyethylene used in the production of the inner layer is used as is - in its pure form - without dyes and therefore has a bacteriostatic property. The main use of the tank is to store water, which can be heated by solar energy, which is facilitated by the color black. Throughout this process, the tank remains highly resistant to ultraviolet radiation.
In addition to storing water, the Aquatech ATV-200 BW tank is ideal for use in plumbing and water supply systems, as well as for use in the chemical and food industries.

It is made from polyethylene that is resistant to aggressive liquids, which also allows such tanks to store water without it blooming and to operate Aquatech tanks at ambient temperatures of -20 ºС ... +60 ºС.

The design of the Aquatech ATV-200 BW tank includes, in addition to the float valve, the container itself made of food-grade and chemical-resistant medium-density polyethylene, an inspection cap with a breathing valve, and threaded fittings.
In the lower part there are special holes for draining liquid (fittings with a diameter of D 1" and D 3/4 "), and in the upper part there is a hole with a fitting D 1" and a free hole D 28 mm - for connecting additional equipment if conditions require it operation.

There is no need to buy it additionally!

Plastic water tanks ( storage tanks in water supply systems) - special containers whose main task is to accumulate water and store it for a certain period of time.
Such tanks are excellent for installation both as the main container in which water is stored, and as a reserve volume “just in case”.
Among the wide range of high-quality, practical and inexpensive tanks for storing volumes of water, we would like to highlight the ATV 200 BW water tank with a float.

Characteristics

It allows for both simple storage of water and its supply to the desired point. It has a geometrically precise shape of a regular cylinder with reinforcing elements on the sides.
Produced in a modern machine in a modern way extrusion blowing.

Peculiarities

• Materials. The Aquatech water tank has a blue outer layer and a white inner layer. This is due to the fact that the inside of the tank is pure polyethylene, without the addition of dyes. Of course, this has a very beneficial effect on the quality and duration of water storage.
• Light weight.
• Practicality and versatility of use (you can store anything in the tank for quite a long time, although it is preferable to fill it with media used for food - water, wine, etc.).
• Durability - if the tank is not subjected to mechanical stress, it can serve for an almost unlimited time.
• Non-corrosive. Plastic tanks do not corrode, which is why they are valued.
• Can be used as a base for a summer shower. This is very convenient, since the water will always be at the desired temperature, regardless of weather conditions ( outer wall dark colored tank - it will heat up naturally - from the sun).
• This model is produced by the famous Russian brand Aquatech.

If you have any questions, feel free to call +7 922 704 88 97 and we will be happy to resolve them all.

The Termoclub company offers to buy tanks designed for technical and drinking water, as well as for liquid, granular, viscous, alcohol-containing, bulk, powder, food and non-food products. We offer containers in blue and black colors, the maximum capacity of which reaches 10,000 liters. We provide affordable prices for plastic water tanks and provide a guarantee on all products.

Features and Benefits

• High-quality workmanship material. The tanks we offer are made from high and medium density polyethylene, to which titanium dioxide is added. Thanks to this, the products do not transmit ultraviolet radiation and have high mechanical strength. The liquid in such containers does not bloom.
• Thoughtful design. The products are equipped with a large inspection cap with a breather valve, which makes filling and cleaning easier. Containers with a capacity of more than 200 liters are equipped with a float, which allows you to control the filling level.
• Versatility of installation. Internal and outdoor installation water tanks, since the containers can withstand temperatures from -20 to +60 °C.

To order a plastic water tank, use the “Cart” service of the Termoclub online store, contact us by phone or leave your number in the “Call back” field.