The effect of an old photo: how to make vintage photos, choosing a program for working with photos, necessary photo editors, filters for processing. Antique effect: one way to create

How to create a film-like effect on a photo so that the picture looks like it was taken on the threshold of the “zero”? We have collected for you best apps, which will help you fill your shots with 90s vibes quickly and without hassle.

Photo processing for film

There are many misconceptions about what the effect under film should be. Usually attributed to him green tint in the shadows, terrible overexposure, fading and lack of contrast and increased graininess. In fact, all this can be called , but film photographs look completely different.

The film itself is different, and the resulting shades in the photographs will depend on the conditions in which they were taken. But we can still highlight a few general rules:

1. Pure color.
2. Correct white balance.
3. Special contrast.
4. No flashy shades.
5. Harmony of color and contrast.

RNL Films

Palaroid photography is a trend that is currently at the peak of its popularity. The application will help you create a film-like effect RNL Films. You can download it for free in the AppStore or Google Play.

The program itself has 5 folders, each of which has many filters that simulate different films. It is important to know that some filters are absolutely free, while others are paid. The entire pack can be purchased for 299 rubles (price for 2018).

In addition to filters, RNL Films has many standard settings. You can edit the brightness, contrast, add a little noise or dust.

HUJI

The developers of the HUJI application have created such a policy that you cannot control or change anything in the program, thereby simulating the use of a real camera from the 90s. Whatever frame you take, whatever random effect will be applied to the frame, that’s the picture you’ll get.

HUJI is more dominated by blue, orange and other contrasting, intense shades.

The program is free and can be downloaded from official stores. But in free version It is possible to apply a filter and date only to instant photos. If you want to process a finished photo, you will need to go to Settings and buy full version applications for 75 rubles (price for 2018).

Calla

The following application is called Calla and its characteristics are a bit similar to HUJI. It can be downloaded from official stores and used absolutely free. The program allows you to apply effects and dates to previously taken photographs.

Photos from the Gallery can be added by clicking on the “+” icon in the lower left corner. The program will automatically process them. To save a photo, you need to tap on it and hold it lightly, then a loading arrow will appear.

Dalgona

We would like to note right away that the Dalgona application is paid and costs 75 rubles (price for 2018). The program is quite simple and has several film filters with which you can achieve a Palaroid-like photo effect. Unfortunately, you can't even adjust the intensity in this app. Buy it or not: it's up to you.

Kamon

Another application that makes the effect old film on iPhone or Android, called Kamon. You can find it in official stores. The program has a rather bright contrast, but maybe this is what someone will like.

To process ready-made photos, the application needs to be updated for money to the PRO version.

Kudak Pro

Program Kudak Pro completely imitates a film camera. Initially you are given only 24 frames. After you take your pictures, your film goes to development. After a day, your photos will be ready. If you don't like the result, you can send the film for development again.

Lomograph

In a cool app Lomograph There are only 5 filters, but they all create a wonderful effect under film. The program is absolutely free and easy to use. Experiment with your photos as much as you like!

Cassette effect

Applications with various “cassette effects” are quite similar to each other. Therefore, we decided to combine them into one list:

1. InShot(Glitch, RGB, Noise effects);
2. Afterlight(tap on the square with stripes);

Palaroid effect in the photo

A photo like a Palaroid with a characteristic white frame can be taken in several ways.

Method 1

Everything is very simple here. Need to download the program Pixl-o-matic. Next, in the lower menu, tap on the frame icon and select the desired Palaroid mask. All that remains is to save the photo to the Gallery. There are also various highlights with abrasions for every taste.

Method 2

The second method is a little energy-intensive, but also easy.

How to make a Palaroid effect on a photo:

1. In the search, type in “palaroid frame” or “palaroid frame”.
2. Find the frame you want and save it.
3. Already processed photo crop to the right size(most often square).
4. Login to the program PicsArt and open a photo with a frame.
5. Then click “Add Photo” and select the processed photo.
6. Place the photo in the frame. For convenience, you can reduce the transparency a little. Once the photo is straight, transparency can be restored.
7. Photo is ready! All that remains is to save it to the Gallery.

Old film effect on video

How to make the effect of an old film on video? Several applications will come to the rescue that will do their job perfectly. Let's get to know them in more detail.

8mm Vintage

How to shoot video with a retro effect? The 8mm Vintage app has several filters that are stylized to look like old film. And it all looks incredibly stylish and cool. The program costs 149 rubles (2018 price), but if you are interested in a similar topic, you can purchase the application.

After all, in addition to filters, you can choose the frames that the video will have, as well as apply a vignette or an elegant orange highlight. There is also a flickering effect that imitates low-quality film from the 90s. Such techniques will make even a boring picture much more interesting.

VHS Camera and VHS Camcorder

Using apps VHS Camera And VHS Camcorder You can create the effect of an old film and shoot video with several different filters in 4:3 format. And also upload your videos and style them as a film from the 90s. The programs can be downloaded absolutely free of charge from official stores.

Antique photo processing has many production methods. Today we will look at one of the simplest but most effective methods.

As an example, I use a photograph of one of the most beautiful areas of Kyiv.

The first step we'll do is create a noise effect:

• create a new layer. To do this, I use the shortcut “Ctrl” + “J”;
• reset color settings - key “D”. Changes after clicking can be seen at the bottom left. Color settings have become standard.

You should get the following:

The next step will bring us even closer to how to make an antique photograph in Photoshop. And we need even more aging. For this we use “Noise”: “Filter” – “Noise” – “Add Noise”. In the window that opens, select the “Gaussian” method, and set the effect to 20%. I got the following:

Now we are very close to the finish line. We need to select the Soft Light blending mode. This gives us the following effect and antique photo processing begins to work:

Now, to add realism and even greater age, we will show how our work has faded in the sun, which inevitably happens with old photographs.

This task requires creating a new layer that needs to be placed on top of the existing ones. Fill the created layer with color No. “e6e1cc”. Now change the blending mode for the new layer, it will be “Color”. I got the following:

The work already looks pretty good, but still needs some work. I want to add scratches. To do this, create a new layer and press “D”. Next, from the “Filter” ¬– “Rendering” tab, select “Clouds”. Now again in the filters tab, select “Rendering” – “Fibers” and set the parameter “17” and “15”. Now we need to go to the “Images” – “Settings” or “Correction” – “Threshold” tab. Set the value to “15”. Now to complete the adjustment of this layer, go: “Filter” (Filter) ¬– “Blur” (Blur) – “Blur+” (Blur More).

The final touch: a “Soft Light” overlay, with the opacity set to 70%.

IN lately increasingly popular among users social networks gives the effect of an old photograph in the pictures. Photo cards processed in this way attract attention and receive the most “likes,” which is something that account owners can’t help but like.

You can create the effect of an old photograph in several ways, which will be discussed in this article. In addition, the most popular programs for converting pictures in one click will be considered.

What is the old photo effect

In the early 60s, people could only take black and white photos. This service was usually performed in photo salons, since in our country at that time there were not yet a sufficient number of cameras on sale. A decade and a half later, color photographs appeared, which were also taken only by professionals. True, at this time it was already possible to buy your own camera without any problems. The photographs obtained using this technique delighted with all shades of black and gray on a white background. Then improved devices appeared, which people called “soap boxes.” With their help, color photographs were also obtained.

Over time, color photography began to gain new momentum. Cameras capable of making cards began to appear high quality and permissions. Now they have been replaced by professional SLR cameras capable of accurately conveying the image that the human eye sees.

However, fashion dictates its own rules. People gradually began to “move away” from professional photographs, preferring photos in a retro style. Since it is now almost impossible to purchase a camera from the 60s, the effect of an old photograph in photographs is achieved in other ways.

Applications for creating vintage photos

Currently, you can find many special programs that have the “old photo effect” filter in their arsenal. Most of them are no different in functionality, so for the average user, several of these programs on their phone will be enough to create retro-style photos. The list of the best film effect software includes:

• Afterlight - here you can find various “scuffs” that will give the effect of an old photo with scratches (Dusty section).
• Nebi is a simplified analogue of the Afterligth program with a large number filters, graininess, glare and highlights.
• HUJI is perhaps the best photo editor with old photo effect. In the free version, pictures must be taken immediately in the application, then filters will be applied randomly to them. However, this is not a problem at all, since the program creates a great effect of an old photo with a date every time.

• Kudak PRO - suitable for owners of iOS devices. Takes pictures that look as close as possible to film. In addition, this program has one fun feature - Kudak PRO gallery. It imitates “film” with a limited number of frames, which must be “twisted” at the end of shooting.

The applications listed above will be quite enough to take a stylish vintage photo on your smartphone. However, it often happens that it is necessary to “age” photographs with professional apparatus. In this matter, the user will be helped by a faithful and trusted “friend” - Photoshop.

How to take a retro photo in Photoshop

To give a photo a vintage look using Adobe Photoshop, you need to use high-quality textures with scratches and damage. It is best to choose an old object as the main subject in the photo to make the photo look even more realistic. For example, this could be a road bridge built in the 60s. In this case, you will need to “crop out” all modern objects from the photo - cars, signs, people in 21st century clothes.

After this, you need to select the desired texture and insert it into the photo. To do this you need to use the Multiply mode. Using the Free Transform tool, you need to reduce the size of the texture and place it above the photo, and then save the changes.

In the same way, you can apply another layer of texture to the photo, reducing its “opacity” if necessary. If original photo looks too sharp, it is necessary to blur all the images a little.

Creating Vintage Photos Using Lightroom

Lightroom is another photo processing application popular among photographers that allows you to achieve a film-like effect on your photos. You can turn any photo into a movie still in three simple steps.

First you need to make a dark gray background from black, characteristic of all photographs of that time. To do this, you need to work with the Curves tool. Having selected the dotted display of curves, you need to drag the black dot (located at the very bottom) a little higher. After this, all the black colors in the photo will instantly take on a dark gray tint.

Then the same manipulation must be repeated with the point responsible for white(located at the very top). It needs to be dragged a little lower. This will make all the white objects in the photo light gray.

After this, you need to work with color in the Hue, Saturation and Luminance section. It is recommended to reduce the value of blue, giving preference to green. The vintage effect is also achieved by using yellow and purple colors. Grain in a photo is another important element that gives old look. The grain size can be changed in the Develop module by selecting the Effects panel section and the Adding grain subsection.

Polaroid cameras

Special phone applications that imitate the legendary retro cameras - Polaroid - are very popular among vintage photo lovers. These include:

• InstaMini.
• InstaSweet.
• 8 mm.
• Huji Cam.
• POLY.

All of these programs boast quite realistic designs and a wide selection of vintage filters. However, it is almost impossible to single out any best application from the multitude, since they are all good in their own way. Therefore, the choice of which software to use to create high-quality photos, falls entirely on the shoulders of the Internet user.

Professionals know how to create the effect of an old photograph so that the pictures look natural and unobtrusive. Beginners often overdo filters, glare and grain in the photo, thereby moving it away from the desired “ideal”.

Experienced photographers advise not to be afraid to follow your own intuition when processing images. After all, almost every instruction on the Internet, as a rule, is attached to a specific photograph, so it will not work to substitute it for absolutely any photograph.

Where to start

It is important to learn to “feel” the frame, work with light, shades, and be able to apply filters correctly. Then all the photos will look really high quality and natural. To achieve this result will require a lot of practice, experimentation, studying similar works and trying to reproduce them.

You can start learning from ordinary photos stored on your phone, try processing them using different programs, applying and adjusting filters, and changing additional settings. When it starts to work out, you should start doing more, for example, using Photoshop and Lightroom.

In this tutorial I'll show you how to turn a photo you just took into a photo from ten years ago using antique photo effects in graphic editor Adobe Photoshop. You can achieve the desired effect in just a few simple steps, so even a beginner can cope with this task.

Here is the photo to which we will apply the old photo effect in Photoshop.

Step 1: Adding a Hue/Saturation Adjustment Layer

Open our image in Photoshop. First of all we need to replace bright colors to a classic sepia tone. We use an adjustment layer for this.

Click on the new adjustment layer icon, which is located in the layers palette below:

Then select “Hue/Saturation” from the list that appears:

In the dialog box that opens, enable the “Colorize” option by checking the box and drag the “Hue” slider to a value of 40:

Click OK. We see in the Layers palette that an adjustment layer has been added above the Background layer:

In the image the original color has changed:

Step 2: Merge Layers onto a New Layer

Now you need to combine the existing layers into a new layer and place it above the rest. To do this, press the combination + + + . As a result, we see that the original layers have been preserved, and a new layer has appeared above them, which combines the two previous ones.

Step 3: Rename the New Layer

Let's give the new layer an informative name. Double-click on the title “Layer 1” in the Layers palette and rename it “Glow”:

Step 4: Blur the Merged Layer

Now the merged layer needs to be blurred. Select the “Glow” layer in the layers palette and execute the command Filter > Blur > Gaussian Blur:

Set the Radius slider to 6 pixels.

Click OK. Note that the image is blurry, but you can still see what's in it.

Step 5: Change the Blurry Layer's Blending Mode to "Overlay"

Now at the top left corner of the layers palette, change the “Blend Mode” option from “Normal” to “Overlay”.

Our image has become softer:

Step 6: Lower the Opacity of the "Glow" Layer

Lower the opacity of the “Glow” layer. The Opacity option is located directly opposite the Blend Mode option at the top of the Layers palette. Reduce the opacity to 70%:

Now the glow effect is not as intense as it was before:

Step 7: Adding a New Layer

Key we held it down so that when creating a new layer, a dialog box would open, and we could immediately set the parameters we needed, for example, give the layer a new name, which we will do. Let's rename the layer "Edges".

Click OK. In the Layers palette, on top of the rest, we see a new layer “Edges”.

Step 8: Filling the Layer with Black

To fill a layer with black, use Edit > Fill or press the combination + . The Fill dialog box opens.

Set the color to black, mode to normal, opacity to 100%.

Click OK. Our image will be filled with black.

Step 9: Using the Elliptical Marquee Tool

Select the Elliptical Marquee Tool from the Tools palette. By default, it is hidden behind the Rectangular Marquee Tool, so you will have to hold the left mouse button on it for 1-2 seconds until a drop-down menu appears in which we select the Elliptical Marquee Tool:

Step 10: Selecting the Oval Area

With the Elliptical Marquee Tool selected in the tool palette, click the button in the upper left corner of the image and drag it to the lower right corner. This will create a large oval selection inside the document:

Step 11: Adding a Layer Mask

While holding down the key , Click on the layer mask icon at the bottom of the Layers palette.

Now in the Layers palette we see that a layer mask has been created for the layer with a black fill. What is under the black oval on the layer mask thumbnail will be hidden, what is outside will remain.

As a result, our image will look like this:

Step 12: Blurring the Edges

Apply a Gaussian Blur filter to the “Edges” layer to soften the transition from the image to the black frame. Call up the “Gaussian Blur” dialog box in the same way as we did earlier in step 4. Set the Radius parameter to approximately 25 pixels.

Now we see a smooth transition between the black area and the image:

Step 13: Lower the Opacity of the "Edges" Layer

Let's lower the opacity value to 35%:

This will give us a softening of the darkening effect:

Step 14: Adding a New "Noise" Layer

Let's add some noise to the image. While holding down the key Click on the create a new layer icon at the bottom of the layers palette:

Name this layer "Noise":

Click OK. A new “Noise” layer will be created on top of the others:

Step 15: Fill the New Layer with Black

Again fill this layer with black, as in step 8. Click OK. The layer will be filled with black.

Step 16: Adding Noise

With the “Noise” layer selected, go to Filter > Noise > Add Noise:

The Add Noise dialog box opens. In it, set the Amount slider to approximately 130%, the Distribution parameter to Gaussian, and check the Monochromatic box:

Click OK. The image will be completely filled with black and white noise:

Step 17: Change the Blend Mode of the "Noise" Layer to Soft Light

Change the blending mode from Normal to Soft Light.

Our image will look like this:

Step 18: Lower the Opacity of the "Noise" Layer

Lower the opacity of the “Noise” layer to 10-15%:

Here's my photo now, after reducing the opacity of the noise:

Step 19: Adding a New Layer "Grain" and Filling It with Black

We have done this procedure more than once. I'll tell you briefly: create a new layer, rename it “Grain”, fill it with black.

This article will be useful for needlewomen and especially those who are passionate about making dolls at home. What to do when you need to quickly give a fabric a new shade or an aged antique look at home, without using special fabric paints? First of all, don't panic! In this article we will look at two simple ways giving the fabric an antique effect: immersing the material in a solution with paint and painting with a brush, as well as options for painting in various colors.

Aging.

1. Method - immersion.

You choose a dye, dilute it to the desired concentration, and immerse the material in it for a certain time. If the color turns out to be dark, rinse the fabric. Coloring with natural dyes, e.g. tea, is the most convenient way. Think for yourself, there is tea in every home, and if you absolutely do not like the color, then you can almost completely rinse it out, provided that the fabric has not had time to dry. Once upon a time in America, the wives of the first settlers dyed rag dolls with tea. They were painted in different shades, achieved this smooth transition, dipped a bundle with a piece of fabric in sweet tea and gave it to children, using it as a modern pacifier.

The intensity of the resulting color depends on the type and strength of the brew, soaking time and solution temperature. It has been verified that the stronger and hotter the tea, the richer the shade. In addition to regular black tea, you can use Karkare tea, coffee, onion peel and even potassium permanganate or iodine as a dye. Depending on the concentration and time of retention in the solution, the desired color is obtained.

Staining table onion skins and tea.

Using your imagination, you can experiment!

Table of staining with green and magenta.

A. Tie the fabric into knots, submerge it briefly in the solution so that the knots do not have time to soak, then remove. You should get a fantasy pattern.
IN. Prepare a container with dye, hang the fabric over it and dip one end into the solution - the fabric will gradually absorb it. You will get a light top that smoothly transitions into a darker bottom.
WITH. If you want to leave the natural color but add a chaotic pattern, then draw “bloopers”. Lay the fabric out on a horizontal surface and, moistened with a sponge in a strong solution, apply it to the fabric, the paint will spread and smooth transitions of tones will be obtained (this dyeing process can be done on either wet or dry fabric).
D. If you want a uniform tone, then stir the immersed fabric in the solution constantly.

2. To create the effect of spots, the second method is suitable - painting with a brush.

We choose which dye we will make the stains with. Let's focus on the same thing - tea.
A. We prepare strong brewed tea, take a brush No. 9 and apply it to the canvas, as if we were dirtying it. An interesting result is obtained when tea leaves are left on the fabric.

Painting with a brush.

IN. If you stick the adhesive plaster in strips or arrange it in squares, cut out small figures from it and stick it on the fabric, you can get different effects.

Coloring and natural dyes.

Do you need a specific color, but can't decide which natural dye to choose?

As an example, we will give you several options.

Bright yellow color: birch leaves, turmeric.
Yellow: barberry (bark, roots and wood can be used), fresh buckthorn bark.
Lemon: wormwood + alum.
Blue: blackberries, flowers of willow-herb, all above-ground parts of meadow sage.
Purple: Blueberry.

Green: elderberry or spinach leaves, juniper berries.
Red: oregano herb, ripe elderberries.
Brown: dry buckthorn bark, horse sorrel root.
Red-brown: onion skins.
Orange: sea buckthorn berries.
Beautiful gingerbread: cook in cinnamon broth.
Mustard: dyed fabric with turmeric, boil in tea.

1. Before staining, first dip the sample into the solution.
2. Remember that natural fibers absorb dye more intensively than synthetic ones.
3. Be sure to use a fixative mordant after painting so that the color remains as bright and the canvas does not fade in the future. It is very convenient to add a color fixative to the dye itself.
4. It is imperative to paint in enamel or glass containers, since iron, copper and aluminum give a chemical reaction and the color of the dye changes.
5. Dyeing is done only on clean fabric. You can dye not only fabric, but also wool.

Dyed wool.

Wind the yarn into loose small skeins, tie in three places with regular cotton. thread. For a kilo of yarn, take a piece of household goods. soap, finely chop and dissolve in hot water. Pour this solution into warm water and beat into foam. Wash the yarn, wring it lightly, but do not twist it! Rinse thoroughly warm water to rinse off the soap solution. Then start painting.

Rinse and place on a net.

Remember that painting is always a risk, whether the color or shade you expect will come out or not.

At the same time, this is a great opportunity to change an unsuitable color and give a second life to an unsuccessfully purchased item. Try, experiment, and success awaits you!