Forms of fire alarm acts. As-built documentation for fire alarms

As-built documentation is perhaps the most important part of what we hand over upon completion of all work performed. You can, in fact, not do the work, as is customary in our country, but there must be papers! As the old saying goes folk wisdom: if you did it, write it down, if you didn’t do it, write it down twice. In this post I will talk about the as-built documentation that we must provide to the customer upon commissioning automatic installation fire alarm or, more simply put, when a fire alarm is handed over. You can download the forms of documents included in the executive documentation below.

For the laziest, I will immediately provide a list of documents included in the executive documentation:

1. design and working documentation;
2. a set of working drawings with changes made to them;
3. technical documentation of manufacturing enterprises;
4. Inspection report;

Download acts for executive documentation on fire alarms.

In the archive:

1. Inspection report

All reports, except for the Test Report of protective pipelines and the Protocol for heating cables on reels, are made in Excel and filled out for convenience and understanding.

For those who are wondering where this list came from, I have provided a brief explanation below.
There is such a wonderful guidance document called “RD 78.145-93. Systems and complexes of security, fire and security and fire alarm system. Rules for production and acceptance of work.”

We will not discuss it in its entirety, but will only touch on the provisions related directly to the documentation.
To begin with, we are interested in clause 11.4, which reads:

If necessary, other specialists may be involved.

From this point it becomes clear that an exemplary customer should have an order to appoint a working commission. I can say from experience that it is rare that a small business customer burdens himself with drawing up an order. Therefore, we will have to do it too... The standard form is presented in the archive of document forms included in the executive documentation, which can be downloaded below.

Now let's move on to the mandatory Appendix 1, which specifies the production documentation that we transfer:

APPENDIX 2 Mandatory

Upon acceptance and commissioning of technical signaling equipment, the working commission must draw up the documentation shown in the table.

1. Certificate of acceptance of technical signaling equipment into operation

As usual, we will begin the series of articles by defining which regulatory documents on fire alarm systems (hereinafter referred to as “AFS”) determine the requirements for their availability, technical performance and maintenance. Perhaps a natural question arises: why does an occupational safety specialist need this knowledge? The answer is banal. Having knowledge of the principles of determining the need for an alarm system, you will be able to give an opinion on its compliance with the requirements when an employer enters into a lease agreement for premises. fire safety, thereby further eliminating the risks of receiving penalties from inspection authorities, noting the absence of such in the defective act.

Where are fire alarm systems required?

Fire alarm, warning and fire evacuation control systems must be installed at facilities where exposure to hazardous fire factors can lead to injury and (or) death. The list of objects to be equipped with these systems is established by fire safety regulations.

More specific criteria for determining facilities that require the presence of fire automatic systems are defined in Appendix A of the Code of Rules 5.13130.2009 “Systems against fire protection. Fire alarm and fire extinguishing installations are automatic. Design norms and rules.”

In tables 1, 2, 3, depending on the functional purpose of buildings and premises, as well as their area, you can determine the need for fire alarm systems.

In addition to determining the need to install an alarm system, the set of rules in section 13 defines the requirements for the installation procedure for an alarm system.

What are the requirements for having fire alarm systems?

Another main document that mentions fire alarm systems is Decree of the Government of the Russian Federation dated April 25, 2012 N 390 (with amendments and additions) “On the fire safety regime” (together with the “Fire safety regulations in Russian Federation”).

In clause 63, the head of the organization is assigned responsibility for technical maintenance and preventive maintenance of fire protection systems.

The head of the organization provides in accordance with the annual schedule drawn up taking into account the technical documentation of the manufacturing plants, and the deadlines for implementation repair work carrying out routine maintenance and scheduled preventative repairs of fire protection systems of buildings and structures (automatic fire alarm systems, automatic (autonomous) fire extinguishing systems, smoke protection systems, fire warning systems and evacuation control systems).

What documents determine the procedure for maintaining fire alarms?

Regulatory documents for fire alarm systems include standards that define the procedure Maintenance fire alarm, as well as a list necessary documents, confirming the actual maintenance of the fire alarm system.

“RD 25.964-90. System for maintenance and repair of automatic fire extinguishing, smoke removal, security, fire and security fire alarm systems. Organization and procedure for carrying out work” (approved by the Ministry of Electrical Equipment

“Settings fire automatics. Rules for technical content. RD 009-01-96” (approved by MA “Systemservice”, introduced by Order of MA “Systemservice” dated September 25, 1996 N 25)

“Fire automatic installations. Maintenance and preventive maintenance. RD 009-02-96” (approved by MA “Systemservice”, introduced by Order of MA “Systemservice” dated September 25, 1996 N 25).

Further articles will describe in detail the procedure for organizing the maintenance of APS, as well as how to avoid the need to carry out this maintenance in rented premises.

5.4.1. General provisions

Acceptance of ASPS into operation must be carried out by the working commission appointed by order of the head of the enterprise (organizationtion-customer (22).

The working commission includes a representative of the customer (chairman of the commission), general contractor, design, installation and commissioning organization, as well as the organization carrying out TO and R, representative of the State Border Service. Participation of representatives of the State Border Service in the composition state, departmental acceptance commissions are obligatoryinteresting. In addition to the official representative of the State Border Service bodies, State Border Service employees may be involved in the work of the commissions, implementingcontrolling during construction and further operationobject (clauses 2, 4 NPB 05) (23).

The work of the commission is carried out according to the acceptance testing program tion, agreed upon with the territorial body of the State Border Service and approvedby the customer. The acceptance test program should include (24):

main characteristics of the test object;

purpose of testing;

composition of the acceptance committee;

scope of testing and inspections;

logistics support for testing;

safety requirement;

test methodology;

criteria for evaluating test results.

The working commission must (26):

check the quality and compliance of the installation and commissioning work performed with the design documentation, SNiP, PUE, NPB, technical documentation from manufacturers;

conduct comprehensive tests of the automatic installation fire extinguishing systems in accordance with the acceptance testing program. After carrying out comprehensive tests, a report is drawn up (Appendix 28).

If the working commission discovers a discrepancy between the completed installation and commissioning work on the project, regulatory requirements documentation, a protocol is drawn up indicating any deficiencies identifiedstatistics and deadlines for their elimination, as well as the authorities responsible for thistions.After eliminating the installation deficiencies specified in the protocol,

the commissioning organization must re-present the installation for delivery (27).

A representative of the State Border Service body who is a member of the commission is obliged (29): take part in the inspection and acceptance of installed equipment installation of fire protection systems, familiarize yourself with the certificates, technical passports and other documents certifyingequipment quality indicators, systems and mouth test reports

new fire protection; communicate your opinion in writing to the chairman of the working commission body of the State Border Service on the implementation of the activities provided for by the project andreadiness of the installation for acceptance into operation, and if available

deficiencies - compile and present a list of them. If violations of requirements are detected, regulatory documentsproject decisions and activities, a representative of the State Border Service body expresses a special opinion in writing to the chairman of the commission, and the act

the acceptance committee does not sign (30). 5.4.2. Features of systems acceptance into operation

fire alarm Documentation presented upon acceptance of systems into operation

fire alarm, must comply with Appendix 30 (35.1). Acceptance of ASPS into operation without carrying out a comprehensive

adjustment and testing is not allowed (35.2). Upon acceptance into operation of completed installation work and

When adjusting the ASPS, the working commission carries out (35.3): checking the quality and compliance of the installation work performed

detailed work of the submitted documentation, operating instructions, technological maps and technical documentation of manufacturing enterprises; measuring the insulation resistance of the alarm loop and

electrical wiring;

measuring the resistance of the alarm loop;

IN executive documentation for fire alarms contains a set of working drawings and text documents that facilitate the process of operating the building. It must be provided to the inspectors of the Ministry of Emergency Situations conducting the inspection upon request. Having a fire alarm ID helps you avoid problems with the law.
If the as-built documentation for the APS (OPS) and SOUE is lost or not completed by those who carried out the installation, it must be restored.

Stages of restoration of as-built documentation for fire alarms

To begin work on restoring documentation, building plans from the Bureau of Technical Inventory (BTI plans) are required.

BTI plans look something like this:

Plan redrawn for AutoCad to editable format.dwg

Then the automatic fire alarm system is examined. The presence, location, number and type of sensors, devices and modules of which it consists are checked. The obtained data is plotted on measurement drawings.

Photograph control and control devices,

manual and smoke detectors.

The distribution of fire alarm loops throughout the premises is also important.

After the examination, you can begin drawing the as-built documentation for the fire alarm system.

This stage is similar to design, but with a ready-made arrangement that needs to be transferred to the cable route plan.

An example of an executive layout plan for the placement of fire detectors:

Cost of as-built documentation for APS

To determine the cost it is necessary technical certificate buildings or BTI plans. The calculation is made taking into account the area of ​​the object, but The cost of developing as-built documentation depends on many factors. Each order is individual.

Send the initial data to the email indicated in the Contacts section. We are in as soon as possible We will make a calculation and send it to you.

The standard period for completing ID APS up to 2000 m2 is 7-10 days. The price includes a site survey, creation of documentation and delivery of two paper copies of the project to the client.

There are two ways to reduce the cost of performing work (relevant for service organizations and companies with design skills):

1. Purchase an example project in editable format (dwg, doc). You can link this project to your plans yourself. This option is only possible if there is a project SRO. Documentation contents: title, cover, explanatory note, general data, symbols, structural scheme, plans for the location of equipment and cable routes, connection diagrams, cable log, specification.
2. Pay for remote support for your project. You collect all the initial data (plans, location, types of detectors and devices), we carry out standard control of the project.

Call the phone number listed on the website, and our manager will select the best option for you, which will help you save a lot.

Quotation book of Dear Volzhaninin. Gold Edition.
Part 941.

SNIP 12-01-2004 Organization of construction
SNiP 3.01.01-85
GOST R 54101 2010
SNiP 3.01.04-87 Acceptance into operation of completed construction facilities.
RD-11-02-2006 Composition and procedure for maintaining executive documentation

BCH 25-09.67-85 "Rules for production and acceptance of work. Automatic fire extinguishing installations"
Guidelines " Automatic systems fire extinguishing and fire alarm systems. Rules for acceptance and control
RD 78.145 -93
It is necessary to distinguish:
--executive documentation maintained during the installation process;
--executive documentation, which is drawn up upon commissioning of the installation;
--technical documentation that must be stored on site and maintained during the operation of the installation. This operational documentation also includes performance documentation.

As-built documentation maintained during the installation process:
SNiP 3.01.01-85 "Organization of construction production"
clause 1.14 As-built documentation - a set of working drawings with inscriptions on the compliance of the work performed in kind with these drawings or changes made to them in agreement with the design organization by the persons responsible for the construction and installation work.
SNiP 3.05.06-85
clause 1.7. At each construction site, during the installation of electrical devices, special production logs should be kept electrical installation work in accordance with SNiP 3.01.01-85, and upon completion of the work, the electrical installation organization is obliged to transfer to the general contractor the documentation presented to the working commission in accordance with SNiP III-3-81. The list of acts and protocols of inspections and tests is determined by the VSN, approved in the manner established by SNiP 1.01.01-82.
SNIP 12-01-2004 "Construction organization"
5.14 The work contractor maintains as-built documentation:
- a set of working drawings with inscriptions on the compliance of the work performed in kind with these drawings or on the changes made to them in agreement with the designer by the persons responsible for the construction and installation work;

3. As-built documentation consists of text and graphic materials reflecting the actual implementation of design decisions and the actual position of capital construction projects and their elements in the process of construction, reconstruction, overhaul capital construction projects upon completion of the work specified in the design documentation.

As-built documentation, which is drawn up upon commissioning of the installation
SNiP 3.01.04-87 Acceptance into operation of completed construction facilities. Basic provisions.
3.5. The general contractor submits the following documentation to the working commissions:
b) a set of working drawings for the construction of the facility presented for acceptance, developed by design organizations, with inscriptions on the compliance of the work performed in kind with these drawings or changes made to them by persons responsible for the construction and installation work. The specified set of working drawings is executive documentation;

As-built documentation - part (section) of the “Statement of technical documentation presented upon delivery and acceptance of electrical installation work.”
GOST R 50776-95
3.2 Work planning
The work carried out on...installation and operation of the STS...should be planned taking into account the following standard list of stages:
…………..
k) checking and putting the installed STS into operation with a set of working documentation for operation and maintenance.
BCH 25-09.67-85 "Rules for production and acceptance of work. Automatic fire extinguishing installations" and
Methodological recommendations "Automatic fire extinguishing and fire alarm systems. Rules for acceptance and control"
13.5. When accepting the AUP for operation, the installation and commissioning organization must present:
-executive documentation (a set of working drawings with amendments made to them);

Technical documentation that must be stored and maintained during the operation of the installation.
FIRE SAFETY RULES IN THE RUSSIAN FEDERATION
61….As-built documentation for installations and fire protection systems of the facility must be stored at the facility.
RD 009-01-96
1.5 General requirements to technical documentation.
1.5.1 The facility operating the fire automatics installation must have the following documentation:
a) design and estimate documentation (inspection report);
b) execution documentation and diagrams, acts of hidden work (if any), tests and measurements;
………
P)…

Here the phrase - "design documentation and as-built drawings for installation" - is very inaccurate.

Operational documents - according to GOST 2.601;

JV "Fire fighting equipment. AUPS and PT. Requirements for installation and operation" is a project and it is too early to refer to it.

RD 11-02-2006 "Composition and procedure for maintaining executive documentation"
3. As-built documentation consists of text and graphic materials reflecting the actual implementation of design decisions and the actual position of capital construction projects and their elements in the process of construction, reconstruction, and major repairs of capital construction projects as the work specified in the design documentation is completed.
clause 5. As-built documentation is maintained by the person carrying out the construction.

After all, no one argues that the as-built documentation =CONDUCT= for the installation.
Also, no one doubts that it is not realistic to carry out the installation strictly (strictly) according to the project. There will definitely be deviations. For example, in the routing of cable lines, in the actual location of detectors, etc....
Although the word =deviation= is somewhat dangerous, it entails agreement with the designer (if he is not his own).
We must speak more gently - there are some minor inaccuracies.
Smoker.
If you actually kept the executive documentation, and did it correctly, then after the delivery of the object, why do you need this waste paper?
So hand it over to the customer.
And executive documentation is not only the diagrams that are required of you. So the customer will need to be asked to take everything from you. (see SNiP 3.05.06-85, clause 1.7).
And also in
VSN 123-90 "Instructions for preparing acceptance documentation for electrical installation work"

As is usually well said in
"Fire safety rules for Moscow"
3.1.14. At the site, the person responsible for operating the installation must have the following technical documentation:

Although here the phrase “design documentation and as-built drawings for installation” is not very accurate.

By the way, not so long ago we discussed the question of whether a project is needed at a commissioned facility?
I won’t bother you, but the point is that the project (more precisely, the working documentation) is needed only for the installers, and the owner of the facility, after commissioning, needs the as-built documentation.

The main regulatory message:
PPB01-03 clause 98. Fire automatics installations must be in good condition and in constant readiness, and comply with design documentation.

Federal Law "TROTPB" No. 123 Article 83 Part 1. Automatic fire extinguishing and fire alarm installations must be installed in buildings, structures and structures in accordance with project documentation, developed and approved in accordance with the established procedure.

SNiP 21-01-97 "Fire safety of buildings and structures"
clause 4.3 ...do not allow changes in design, space-planning and engineering solutions without a project developed in accordance with current standards and approved in the prescribed manner."

RD 78.145-93 SYSTEMS AND COMPLEXES OF SECURITY, FIRE AND SECURITY-FIRE ALARMS. RULES FOR PRODUCTION AND ACCEPTANCE OF WORK
clause 1.1. Work on the installation of technical signaling equipment must be carried out in accordance with the approved design estimates or inspection report (in accordance with standard design solutions), working documentation(project of work, technical documentation of manufacturing enterprises, technological maps) and these Rules.

VSN 25 - 09.67 – 85 “RULES FOR PRODUCTION AND ACCEPTANCE OF WORK.
AUTOMATIC FIRE FIGHTING UNITS"
1.1. Work on the installation of automatic fire extinguishing installations must be carried out in accordance with the approved design estimates and working documentation, work execution plan (WPP) and technical documentation of the manufacturing enterprises.

"Fire safety rules for Moscow"
3.1.1. APZ settings must comply technical solutions and project requirements. Making any changes to the design of the installation, rearrangement of protected premises and other reconstructions may be carried out in agreement with the design organization, notifying the authorities of the State Fire Service (SFS).
3.1.14. At the site, the person responsible for operating the installation must have the following technical documentation available:
a) design documentation and as-built drawings for the installation;

Article 83. Requirements for automatic fire extinguishing systems and fire alarm systems

1. Automatic fire extinguishing and fire alarm installations must be installed in buildings, structures and structures in accordance with design documentation developed and approved in the prescribed manner.

Fire alarm systems are a complex set of equipment, controllers and sensors. This is one of the main engineering systems of the building, responsible for the safety of people, staff and visitors. When creating fire alarm systems, it is mandatory to draw up as-built documentation for the fire alarm project. Depending on the characteristics of the objects, both the project and the composition of the executive documentation for fire alarms will differ, which is regulated by a special rule, VSN 25-09.67-85, as well as RD 78.145-93 - a guideline document regulating the rules of work when creating an fire alarm system.

The latest standard provides a definition of the term ID. Clause 11.4 states that the installation organization that implemented the fire safety equipment system project must present to the commission;

• Working documentation – a set of drawings or survey reports;
• TD from manufacturers;
• Certificates of conformity, technical passports;
• Production documents."

Another norm known to all managers is the Rules of the Fire Safety Regime of the Russian Federation in paragraph 61 of which it is stated that all technical documents on PS are drawn up by the contractor, the organization performing installation operations in the building or on the territory, and upon delivery are handed over to the customers. The documents are kept by the client and presented at the request of the Ministry of Emergency Situations inspectors.

Why do they trust us to create ID APS?

When carrying out work on the design and creation of fire protection, GEFEST-ALARM LLC draws up and transfers to the Customer all the drawings, diagrams, and acts required by the rules, which fully comply with state norms and rules. But at other sites it may be lost or compiled with errors, which will cause claims from the inspection authorities. In this case, you can contact our specialists for an ID recovery service. This difficult process, which is similar to design.

We will conduct a full inspection of the equipment, draw up plans and create drawings of cable communications. To carry out this work, we will need building plans, all other papers, certificates and acts related to the PS operating at the site.

• Activities for compilation or restoration will be carried out at the highest level.
• We guarantee high quality Carrying out these works, we have a large design and implementation of alarm systems.
• All operations are performed in accordance with the requirements of the PPR and RD.

We can also draw up an ID for installation organizations, this will free up their time and resources, give them the opportunity to focus on the site and be sure that all papers will be ready on time.

Composition of the executive documentation

The list of executive documentation for fire alarms according to RD 78.145-93 is given below.

1. Magazines

• General work log;
• Incoming control log;

2. Executive circuits

• Executive drawing of fire alarm networks;

3. Certificates of inspection of hidden work:

• Laying fire alarm networks (on walls, ceilings, in the floor; sewerage; in the ground);

4. Test reports and statements:

• Incoming control acts;
• The act of transferring equipment, products and materials for installation;
• Building inspection report;
• Certificate of readiness of buildings and structures for installation work;
• Protocol for measuring the insulation resistance of electrical wiring;
• Certificate of completion of installation work;
• List of installed control panels (SPU) and detectors;
• A leak test report for protective pipelines with separation seals (drawn up when installing technical alarm systems in explosive areas);
• Certificate of completion of commissioning work;
• Certificate of complex testing of automatic fire alarm installation;
• Certificate of acceptance of technical means of warning and management of evacuation of people in case of fire into operation after comprehensive testing;
• Certificate of acceptance of fire alarm technical equipment into operation;

5. Certificates and quality passports for the materials and equipment used, sanitary and epidemiological reports, fire safety certificates;

Dear specialists! There is a need, in light of recent events, to consider more carefully the installation and etc. security and fire system newly installed at new or reconstructed facilities. I will write questions in the form of questions or statements.
1) As I understand it, we draw up the as-built documentation for the installed alarm systems not according to VSN123, not according to I1.13-07, but according to RD 78.145-93 (attached file here)? So we take all forms of acts from there?
2) Where do we get the form of acts for hidden work, from RD 11-02-2006? By the way, does this document also apply to the preparation of operational documentation for the OPS?
3) If we laid some cables in the ground, then we use GOST R 51872-2002 when drawing up the executive circuits. Executive geodetic documentation. Execution rules? Or does it not apply to OPS?
4) Commissioning work: should a commissioning program be drawn up for OPS and where is it regulated (which document MUST require this)? Technical supervision indicates that it is MANDATORY and is agreed upon with the Customer before starting work, among other things. I am attaching here a version of such a PNR program.
5) PNR: what document regulates WHAT and HOW to check in installed alarm systems? What protocols should there be and for what purpose and what is their form? It's a complete mess right now. Laboratories present all sorts of different things that are not based on anything. Are there any standards somewhere? For example, there are Test Standards for electricians, PUE, PTEEP, but where for firefighters?
6) Should installation companies provide verification logs for purchased products, general work logs, and CABLE logs? If cable cables are required, where is this stated? Technical supervision demands, but cannot give reasons. They have only one argument - once the Customer asks, then an unconditional obligation is born on the performers to provide. At the same time, they refer to Article 8 of the Law on the Protection of Consumer Rights and indicate that the Customer purchases the service as a consumer and can demand a lot in accordance with this law as a consumer. In my opinion this is absurd!
7) Should a program be written and agreed upon with the Customer to test the operation of an installed and tested fire alarm system in the presence of a representative of the Customer’s operation? The customer, in the form of operation, now requires this from us.
8) Is it required for cable coils for fire alarm systems that the contractor purchases to include factory test reports for the cable with the as-built documentation? After all, protocols for cables of low-current systems are not provided by manufacturers. The customer requires it, but the suppliers indicate to us that such protocols are not provided, only for cables starting from 0.4 kV. Where is it written that we are obliged to provide such protocols to the Customer and that the manufacturer is obliged to issue them?
9) Is the Customer right in demanding certificates for purchased products (a copy of these certificates) with the ORIGINAL blue seal of the supplier organization from whom we purchased the products? We put on the certificates the stamp “Copy is correct” of our installation organization. Although we can download these certificates from the Internet and affix our own stamps. However, the Customer asks for the seal of our final SUPPLIER, that it was he who sold us this product and under a specific invoice. Is the Customer right here? In my opinion, these are serious quibbles with the executive package. At least in Lately and everything gets tougher, but not to the same extent.

1. Register of executive documentation

2. General log of work and special work:

• Cable management log
• Incoming inspection log
• Author's supervision journal (to be completed by the responsible person from the design organization)

3.

• Executive diagram of the security and fire alarm system

4. Acts, acceptance and testing protocols, other documents:

• The act of transferring equipment, products and materials for installation
• Building inspection report (name of the object, number of buildings, premises, number of floors, type of structure, indication of the type of alarm, type of detectors, control panels, sirens and their installation locations for each building (room), instructions for blocking building structures(name of material, size, number of protected structures, type and number of detectors), indication of the length, types of laying of wires and their protection, indication of power supply, estimated cost and the planned installation period, signatures of representatives of the customer, security department, state fire supervision authorities).
• Certificate of readiness of buildings and structures for work
• Certificate of completion of work
• Protocol for measuring insulation resistance of electrical wiring
• List of installed control panels (SPU) and detectors
• Certificate of testing of protective pipelines with separation seals for leaks (drawn up when installing technical alarm systems in explosive areas)
• List of technical documentation presented upon delivery and acceptance
• List of installed equipment
• List of changes and deviations from the project
• Insulation resistance measurement protocol
• Certificate of technical readiness of the system

5.

• Laying security and fire alarm networks (on walls, ceilings, floors, sewers, ground)

6. , fire certificates, sanitary and hygienic conclusions for Construction Materials, products and designs. For all building materials, products, structures and equipment arriving at the construction site, an incoming inspection report must be drawn up and then signed by the responsible persons.

7. A set of working drawings for the construction of the facility presented for acceptance, developed by design organizations, with inscriptions on the compliance of the work performed in kind with these drawings or changes made to them made by the persons responsible for the construction and installation work, agreed with the authors of the project.

8. Documents on approval of deviations from the project during construction

The set of acceptance documentation includes a package of permits:

• Installation organization information sheet
• SRO of the installation organization
• Orders for responsible representatives
• Personnel certificates (welders, electrical personnel, etc.)
• Detailed documentation with the Customer’s stamp “In production of work”
• Project of work production ( title page and familiarization sheet)

*The presented composition of the executive documentation is approximate. Please check with the customer for the exact composition of the as-built documentation.

measuring the resistance of the alarm loop;

IN executive documentation for fire alarms contains a set of working drawings and text documents that facilitate the process of operating the building. It must be provided to the inspectors of the Ministry of Emergency Situations conducting the inspection upon request. Having a fire alarm ID helps you avoid problems with the law.
If the as-built documentation for the APS (OPS) and SOUE is lost or not completed by those who carried out the installation, it must be restored.

Stages of restoration of as-built documentation for fire alarms

To begin work on restoring documentation, building plans from the Bureau of Technical Inventory (BTI plans) are required.

BTI plans look something like this:

Plan redrawn for AutoCad to editable format.dwg

Then the automatic fire alarm system is examined. The presence, location, number and type of sensors, devices and modules of which it consists are checked. The obtained data is plotted on measurement drawings.

Photograph control and control devices,

manual and smoke detectors.

The distribution of fire alarm loops throughout the premises is also important.

After the examination, you can begin drawing the as-built documentation for the fire alarm system.

This stage is similar to design, but with a ready-made arrangement that needs to be transferred to the cable route plan.

An example of an executive layout plan for the placement of fire detectors:

Cost of as-built documentation for APS

To determine the cost, a technical passport of the building or BTI plans are required. The calculation is made taking into account the area of ​​the object, but The cost of developing as-built documentation depends on many factors. Each order is individual.

Send the initial data to the email indicated in the Contacts section. We will make a calculation as soon as possible and send it to you.

The standard period for completing ID APS up to 2000 m2 is 7-10 days. The price includes a site survey, creation of documentation and delivery of two paper copies of the project to the client.

There are two ways to reduce the cost of performing work (relevant for service organizations and companies with design skills):

1. Purchase an example project in editable format (dwg, doc). You can link this project to your plans yourself. This option is only possible if there is a project SRO. Documentation contents: title, cover, explanatory note, general data, symbols, block diagram, equipment and cable layout plans, connection diagrams, cable log, specification.
2. Pay for remote support for your project. You collect all the initial data (plans, location, types of detectors and devices), we carry out standard control of the project.

Call the phone number listed on the website, and our manager will select the best option for you, which will help you save a lot.