Toy cars are better manufacturers and models of modern technology. How to make a car - diagrams, patterns, scans of homemade paper cars (85 photo ideas) How to make a car of the future from scrap materials

To assemble the kart model discussed below, you do not need many tools and materials, and the assembly process is quite simple. The author decided to assemble a car in retro style.

Materials and tools for creating homemade products:
- bicycle wheels;
- pine boards and bars;
- oak for creating the chassis (beams, boards);
- 24V electric motor with controller;
- 24V battery (or two 12V batteries);
- two long screws for fastening;
- saw;
- good glue for wood;
- drill with drills;
- materials for interior trim (leather or leather substitute);
- headlights, taillights and other elements to create realism (optional);
- screws, nails and more.

Map making process:

Step one. Development of car design and overall structure
It all starts with a rather boring event - thinking through the structure and design of the car. After all, if you improvise during assembly, it is unlikely that you will be able to assemble something reliable and beautiful; it is better to work out most of the details in advance.

Among other things, it is important to remember that in such a car its weight will play a key role, since the car runs on electricity. The heavier the car, the more powerful the engine is needed and, as a result, the larger the battery capacity. You will also need to add the weight of the child to the weight of the car.
If you plan to install headlights in the car, then this will also be an additional energy consumption.

Having decided on the design, you need to sketch it out on paper, estimating the dimensions. It is important to take into account the length of the child’s legs, his height, and weight. All this determines the amount of materials consumed for homemade products. Still need to pick required diameter car wheels.

On final stage you need to estimate how much power will be transmitted to the wheels of the car, with what maximum speed he will drive and how far he can travel. In general, the slower the car goes and the lighter it is, the less energy the product will consume.
The author's choice fell on a 350-watt engine with a gearbox that reduces the speed to 600. This configuration is enough for the kart to move at a speed of 25 km/h, which is more than enough.

To achieve balance, the engine and battery are placed in opposite parts of the car. The author placed the batteries in the front and the engine in the back. To save money, you can buy a brushed motor. The author produces 2500RPM, which is a lot and the speed needs to be lowered using a gearbox. The gearbox also allows you to get good traction of the car at low speeds.

Step two. Assembling the car frame
The author makes the frame out of wood, it’s simple and ingenious. Wood is very convenient to work with, it is light and cheap. The common wood used here is pine. It's flexible, lightweight, and fits the frame perfectly. But to create the pendant, something stronger is used, this is oak.

Step three. We are building a building
The outer skin is easy to do using plywood, which can be used to make the nose section, including the hood, and also cover the rear section. It is not recommended to make doors from plywood, as they are responsible for safety. Here you need to take something thicker so that the child does not fall out of the car during a sharp turn.

It is also advisable to dilute the paint first, so it will lie smoother and dry faster. If desired, you can apply several layers and even varnish the car.

If the axle is made solid, that is, the movement is transferred to two wheels at once without a differential, then when turning, a very large load will be placed on the engine and the battery will quickly run out.

Rotation is transmitted using chain transmission. The “power” wheel must be secured securely, since it bears the greatest loads when driving. If you don't fasten it well, it may vomit.

It is also important to ensure that the car has a good braking system. It is not safe to brake with only one wheel, since at speed the car will skid strongly and it may roll over. Since the wheels are bicycle wheels, a bicycle braking system can also be used here. More simple solution There will be a lever installed that brakes the car using friction against the wheel.

Step six. Installing the engine and electronics
Since the motor used is quite powerful, fairly thick wires will be needed to withstand a current of 28A at 24 V. You can calculate the required wire cross-section using famous formula. It is important to understand that the thinner it is and the longer it is, the greater the heat loss will be when driving a car. To avoid bothering with this issue, you can use power cables from the car.

To prevent the engine from immediately draining the battery, you must install a controller. You will also need to make a gas pedal. The controller should gradually increase the voltage depending on the degree of pressure on the gas pedal. The necessary spare parts can be found in Chinese scooters.

Step seven. Finishing the car and detailing it
On last stage construction, you will need to add a certain number of elements to make the car as realistic as possible, to bring it closer to the invented style. Here you can install whatever you want, it could be headlights, a radiator, an antenna, a chest for things in the back and more.
For upholstery of seats and parts of the interior, you can use leather, leather substitutes, various films, fabrics and other materials.

Children's toy cars are the most popular toys among kids. The boys happily play with cars. You can also see girls playing with cars. This toy has a beneficial effect on the development of the child. With the help of these toys, fine motor skills, imagination, logic and motor skills develop.

Due to the variety of types, the machines are perfect for role playing games– children will be able to feel themselves in many roles: passenger, racer, super hero, etc.

How to choose the right toy for your baby?

When choosing a toy car, you need to pay attention to the following:

Types and photos of toy car models

The simplest to operate and at an affordable price are mechanical. They can only ride if the child rolls it himself. There are many models: military, construction, cars and trucks. There are also toy cars different brands: from VAZ to Porsche. These toys are suitable for small children.

Inertial cars - these models are started by a key, a cord or from reverse and drive for some time on their own.

Electric cars are started from electrical sources: a battery or a battery. Such toys are more expensive, but have many advantages.

WITH wired control– the remote control is connected to the toy by a wire, and this is not comfortable for the child, since he will have to go behind the machine all the time. These models are intended for children under 5 years old.

Children school age They will be happy to have toy cars on the remote control. Also popular modern models: constructors, transformers, shifters and anti-gravity ones. Such models offer interesting game, and this helps the child’s development. Radio-controlled cars can also be interesting for adults.

Anti-gravity electric cars They can ride on any flat surface - even on the ceiling. Many people will like these cars: both adults and children.

Upside-down cars - when they collide with obstacles, they turn over, and then return to their wheels and continue to drive. Playing with these cars is quite fun.

Construction cars provide the child with many opportunities for imagination. With such models, the child can change the shape or create his own models of cars. They help the child develop imagination, fine motor skills and logical thinking.

Transformable cars can change the type of transport. It differs from a construction set in that to change its appearance, the toy does not need to be disassembled.

• Collectible cars are often of interest to adults or schoolchildren who collect model cars.

Quality

When choosing a toy, you should pay attention to the quality of the material from which the toy is made, as well as its strength. The material must be environmentally friendly. The paint should be free of smudges and should not smell.

Models with sharp corners You should not buy them as they can injure the child. Cars with loud and sharp sounds can frighten a child.

How to make a toy car with your own hands?

A simple machine can be made from scrap materials. To make a simple machine you will need: a milk carton, straws or toothpicks, caps, glue, scissors and colored paper.

You can create any model: ambulance, fire, truck or dump truck. You can also change its shape and colors. Homemade toys develop the child's imagination, since they do not look like models of real cars.

Material

Soft cars are the safest and often serve as rattles. These toys will help kids develop fine motor skills. Suitable for children up to 6 months.

Rubber toys are used for bathing. They have no moving parts and are quite durable. Suitable for children from 6 months to 3 years.

Plastic cars are the most common among these toys. Using plastic you can get fairly realistic models with parts of any size. Suitable for children from 1 year.

Metal cars are the most durable and realistic, but the most expensive. Such cars are often considered collectible. Suitable for children from 3 years old.

Photos of toy cars

• We also recommend viewing:

How to make a typewriter - diagrams, patterns, designs of homemade paper machines (85 photo ideas)

All parents benefit from conducting educational activities for their children. It would be good for every father to make toys with his own hands together with his children, setting a positive example for them. One of these toys could be a toy car.

What car to make

To choose for making suitable look crafts, you should soberly assess your strengths and means. If a teenager decides to engage in this process on his own, then he should start with simple ideas do-it-yourself machines.

To begin with, you can choose a craft made from cardboard and paper. They are relatively simple to make, and the materials and tools are readily available. All you need is scissors, glue, and cardboard.

How to make paper cars if you have no experience in designing at all? Where should you start, and what are the next stages of work? These issues need to be taken seriously. The child must learn to set a task for himself and be able to solve it.

Cardboard racing car

Let's look at how to make a machine with your own hands. To do this you will need:

• cardboard cylinder;
• scissors;
• colored paper and plain paper;
• stationery pins;
• a set of felt-tip pens;
• white and black cardboard.

The body of the car will consist of a cylinder; it will be covered with paper of any color. 4 black wheels and 4 white wheels are cut out of additional cardboard.

Additional cardboard circles are glued to the end parts of the car so that there is no through holes in a cylinder. The glued circles can be painted with felt-tip pens.

The wheels are attached with push pins in the center of the circle, and their ends are bent from the inside of the cylinder. A small hole for the driver should be cut on top of the finished body. The finished car is painted with felt-tip pens.

Electronic machine with remote control

Children really like cars with remote control. If you don't see it in the store suitable model, then you can assemble it yourself. Today, every home with children is full of toy junk. There you can select suitable spare parts and bodywork.

You will need the following:

• wheels;
• frame;
• electric motor;
• different screwdrivers.

Build process

Most likely, some parts will have to be purchased. This applies to the control system. If a homemade machine has a simple control panel, it will be simpler and more cost-effective. When installing radio control elements, you may have to spend more money for spare parts.

Having distributed the assembly plan and the dimensions of the device, you need to start assembling. The chassis must include wheels. The product itself must be error-free and easy to move. Good grip for the machine will be provided by wheels with rubber tires.

There are two types of motor. Its choice depends on the user who will manage it. If this is a child, then you need to install an electric motor. It will cost less; if possible, it can be removed from a broken toy car.

If the machine is intended for adult users, then you can install a gasoline engine on it. It will cost an order of magnitude more, and caring for it will be more difficult.

Wired controls will limit the movement of the machine. It is preferable to choose a radio unit, then the product will be able to move independently of the wires. But movement will also only take place within radio range.

The choice of body is determined by taste preferences. The variety of models today is simply huge, everything is limited by imagination and budget.

Having prepared all the elements, you need to begin installation. The chassis with wheels is mounted first. Next, the motor and radio are installed on the frame. An antenna is attached to the body. If all components were purchased in a store, installation instructions should be included.

The batteries are attached last. After debugging the engine, the housing is attached to the chassis. The final touch can be decorations from various stickers. The car is ready!

Homemade complex type machine

You can give other instructions on how to make a radio-controlled car. To do this you will need:

• Body of any model;
• Powerful 12V battery;
• Radio control;
• Charger;
• Soldering tool and all necessary components for it;
• Electrical measuring instruments;
• Rubber blanks for bumpers;

Installation process

Process step-by-step assembly The machines are much more complex than the previous type. The suspension elements are assembled first. Then the gearbox with plastic gears is assembled.

To install it, a thread is made in the housing. Next, the motor is connected to power and its performance is checked.

Radio circuits are mounted in such a way that overheating does not occur. Sometimes a radiator is attached to them. At the end, the model body is assembled. That's all you need to make a radio-controlled car.

To homemade car It had maneuverability, and with good speed one must try not to overload it with unnecessary parts.

The presence of headlights and dimensions looks nice, but to attach them, wiring must be installed. As a result, this will complicate the design and assembly.

Photos of homemade cars

Paper police car

• Police car VAZ 21099
• Police car VAZ 2104
• Police car VAZ 2121
• Police car VAZ 2131 (Niva)
• Police car (DPS) VAZ 2114
• Police car (DPS) VAZ 2112
• Police car (DPS) VAZ 2109
• Police car UAZ HUNTER
• Download
• Police car VAZ 2121 (Niva)
• Download

Paper models of VAZ cars

Sports cars made of paper

• Download
• Chevrolet Camaro car
• Download
• Ford Focus car
• Download
• Sports car Lamborghini Miura
• Download
• Ford Fiesta car
• Download

Paper military vehicles

Paper models of foreign cars

• Volkswagen T1(Hippie van)
• Download
• Ford Mustang 3D
• Download (archived color and black and white model)
• Mitsubishi L200 Triton
• Download
• Subaru
• Download
• Subaru Impreza-WRC-2000
• Download
• Subaru BZR
• Download

Paper models of USSR cars

Motorcycles

• Motorcycle Honda-CB750
• Download
• Motorcycle BMW R16
• Download

Paper origami machines (diagrams)

Origami tank
Origami machine

Creative machines - paper crafts (full instructions)

We accumulate quite a lot of straws after use. toilet paper. And if we used to throw them away, now we decided to make crafts out of them. The results were such wonderful machines. Do you want the same? Let's get started!

We will need:

• Scissors or knife
• Brush
• Toilet paper tubes
• Acrylic paints
• Cardboard
• White and colored paper (for decoration)
• Small nails or buttons
• Pencil

How to make paper cars (instructions)

• 1) We prepare as many straws as we want to make machines
• 2) Paint the tubes with acrylic paints. While waiting for them to dry, you can move on to the next step.
• 3) Draw circles with a simple pencil (attach any round object and trace it) - these will be our wheels. For one car you need 4 large circles and 1 small one (for the steering wheel)
• 4) Paint the circles with black paint, the middle with white
• 5) Cut a hole in the middle of the tube - this will be our seat. Glue the steering wheel and attach the wheels using nails or buttons
• 6) And lastly, and also the most exciting thing, we cut out various decorations from paper and glue them onto our supercars :)

That's all! We hope you found the model you like!

What to do with your child: 5 super DIY games for car lovers

Toy cars- not necessarily an attribute of a nursery for a boy. Many girls play them as much as boys. If your little car enthusiast has already run out of ideas on how to play with cars, offer him one of the options that we have collected in this article. Or maybe not just one: all the ideas on how to play cars with a child can be combined perfectly.

DIY games: garage parking for cars

Besides what it is great idea for the game, such parking will help solve the eternal problem with cars that constantly get under your feet. Making this game with your own cars couldn't be easier.

Will need wooden box and a tube made of thick cardboard. You can use the tube from under cling film, cardboard rolls from paper towels etc.

Cut the cardboard tube into equal lengths along the width of the sides of the box, and glue them together to fill the box. You can use a sheet of cardboard as the “back wall” of the garage.

Is your child bored of simply pushing cars around on the carpet? Make new games with your own cars with him: for example, this track. It looks like the real thing and can be placed right in the nursery on the floor.

Print out templates of intersections, turns and straight paths, connect them into a complex route, similar to the intersection of city highways, and you can organize races. You can download road templates here.

To make playing with cars more interesting with your child, add model houses from the construction set to the road. Or use cardboard boxes to create two-level driveways.

Another option for a track for playing with cars is “Eco-track” stickers. This is a whole roll of “road” based on adhesive tape.

The adhesive properties of such a road make it possible to fix it both on a flat floor and on furniture, but after removing the tape, no dirty marks remain.

The route kit includes road markings and road signs, therefore, during such a game with cars, you can unobtrusively teach your child traffic rules for a pedestrian in the city.

On an inclined plane, the cars start together, but do not reach the finish line at the same time. The winner will be the most technically advanced car! Making this DIY toy car game couldn't be easier: all you need is a cardboard box and a little spatial thinking.

Read also: Children's games on fresh air, comes from our childhood

If a child, in addition to a passion for cars, loves Lego. Guides for cars, Start and Finish marks can be assembled from it. Playing with your own hands will be even more interesting.

• Idea on how to play cars for boys: racing platform

This design looks more complicated than the previous ones, but is also simple to manufacture. And running cars down inclined chutes is unusual and fun. See for yourself.

How to make a car with a motor

Hello to all fans make homemade cars from available parts from broken cars! Today we will tell you how to do it yourself make a car with a motor.

This model of a toy car is an air car (it is structurally similar to the “Rubber Motor Car”), that is, it will be driven by a screw. If desired, you can put it in a boat, which will float very quickly.

We make a machine with a motor

To create an air car you will need the following parts:

If you're ready, let's start crafting!

• For a better understanding of the process of designing an air car, we suggest watching the video master class “How to make a car with a motor”
• What, you haven't read it yet? Well, it's in vain...

How to make a toy electric car with your own hands

Let's make a toy electric car with a propeller today. This electric car will be powered by four AA batteries and a small electric motor that will rotate the propeller. It is this propeller that will make our toy electric car move forward. So, to make a toy electric car we will need four AA batteries, two pairs of wheels that you can remove from old broken cars, we will also need a switch and a small electric motor, which you can buy in a store, or, if you have one, broken car on the control panel, then borrow this important detail our homemade products from her. Also prepare a few self-tapping screws and an elastic band for tying banknotes, several wires and thick foam from which we will cut the body of the machine.

Making a self-propelled electric car with a propeller

We solder four batteries in pairs and tie them with an elastic band to make one power source. We connect two wires to it, and connect a switch to their other ends. We include an electric motor in the same circuit. Now you can turn it on and off with a switch.

We make the base of the machine from polystyrene foam. We cut out holes for the wheels in a rectangular piece of foam plastic. Then we connect them with a groove for the wheel axle. We insert the wheels and apply a thin sheet of foam. We fasten it with self-tapping screws.

We do the same with the second pair of wheels.

We turn the base of the machine over and check the ease of movement. If necessary, trim the axle grooves so that the wheels rotate freely.

Next, we screw the shank to the base of the toy electric car with a self-tapping screw, onto which we will attach the electric motor using rubber bands. Using the same rubber bands, we secure the batteries in the front part of the toy car.

We will cut out the propeller blades from a thick film and place them on a plastic sleeve, which in turn we will put on the electric motor roller.

Our self-propelled toy electric car is all ready. Now you can turn on the switch. The electric motor will begin to rotate the propeller, and the electric car will rush forward under the influence of this propeller.

The explanations are certainly not very detailed, but I think you young technicians, you caught the essence, and you can bring the matter to mind. By the way, if you wish, you can come up with some kind of booth to hide the batteries.

In general, everything depends on your imagination. Good luck!

The most inventive toys for children, made by parents

Useful tips

Some parents like not only to buy various toys for their children, but also to make interesting toys with their own hands.

Very often, a toy made with your own hands is simpler and more interesting than factory ones. In addition, such toys are safer, since they are usually made from paper, cardboard and wood, which is much safer than plastic.

Here are the most interesting of them:

Homemade toys (photo)

Smart board with keys, phone, locks, wheels, keychains and letters on magnets.

Many people know that children can play with any thing that interests them. It could be beads or a smartphone - anything that can be studied.

One handyman created this wooden truck for his children.

DIY soft toys

• And here is a board in the shape of a ship, on which you can find a calculator, locks, a lanyard and much more.
• One parent decided to improve playhouse your child, decorating the walls with switches, door handles and threads.
• Children's drawings turned into real soft toys

DIY toys at home

Children love to build railway, so the parents made this colorful railroad with toy cars and trains for their child.

Almost anything can be made from cardboard. And if you add adhesive tape and markers or paints (gouache or acrylic paints), then you can create houses, car parks, tunnels and palaces.

DIY cardboard toys

The child had a lot of cars, and his parents decided to make him an excellent, convenient parking lot out of cardboard and acrylic paints.

Realistic baby animal plush toys

DIY toys (photo)

Constructor for balls

• Parents spray painted it necessary details(pipes and fastenings), and then attached them to the fence so that small balls and beads could be thrown through the pipes.
• 20 toys that only the rich can afford

Homemade toys for children

Experiments with liquids and sand

The parents attached several tubes to the perforated fiberboard, and attached a funnel to the top end of each tube so that they could easily pour liquid or pour sand, which would flow down through the tubes.

To better see the water flowing through the transparent tubes, you can pour it into several containers and add food coloring. So for each pipe there will be water of a certain color.

DIY toys from scrap materials

1. Take a suitable box and, if necessary, cut off one side so that you can build a maze inside it.

2. Prepare a set of sticks for children's crafts or simply cut cardboard into strips. As you create the maze, you will trim these strips with scissors.

3. Before starting construction of the labyrinth, it is better to draw it with a simple pencil, and then glue strips of cardboard or wooden sticks to the drawn lines.

4. Start gluing cardboard strips or sticks edgewise to the drawn lines with hot glue, trimming them where necessary.

5. To make “traps”, trace the coin with a pencil and, using a stationery knife, cut out a circle that will fit a ball, bead or marble. Cut the traps so that a bead or ball can pass by them.

If you want to keep the bead from falling on the floor, bend (and trim if necessary) the sides of the box and insert it inside another box (see image).

How to make a toy with your own hands

Toy car park made from a box and cardboard toilet paper rolls

• You will need:
• – box or crate
• – toilet paper rolls
• – PVA glue or hot glue
• - scissors
• – acrylic paints (optional).
• You need to glue the cardboard sleeves inside the box.
• If necessary, cut each sleeve in half and then carefully glue.
• You can make a helipad on top.

Decorate the craft as you like. You can use acrylic paints and stickers.

Useful tips

Some parents like not only to buy their children various toys, but also to make interesting toys with their own hands.

Very often, a toy made with your own hands is simpler and more interesting than factory ones. In addition, such toys are safer, since they are usually made from paper, cardboard and wood, which is much safer than plastic.

Here are the most interesting of them:

Homemade toys (photo)

Smart board with keys, phone, locks, wheels, keychains and letters on magnets.

Many people know that children can play with any thing that interests them. It could be beads or a smartphone - anything that can be studied.

One handyman created this wooden truck for his children.

And here is a board in the shape of a ship, on which you can find a calculator, locks, a lanyard and much more.

One parent decided to upgrade their child's playhouse by decorating the walls with switches, doorknobs and string.

Read also: Children's drawings that were turned into real soft toys

DIY toys at home

Children love to build a railroad, so parents made this colorful railroad with toy cars and trains for their child.

Almost anything can be made from cardboard. And if you add adhesive tape and felt-tip pens or paints (gouache or acrylic paints) to cardboard, you can create houses, car parks, tunnels and palaces.

DIY cardboard toys

The child had a lot of cars, and his parents decided to make him an excellent, convenient parking lot out of cardboard and acrylic paints.

A doll house based on the popular video game Super Mario.

It all starts at the top of the structure, where the princess is surrounded by cotton wool clouds.

Then you can choose one of two directions through the pipes: to the world of mushrooms or to the very bottom to the main villain.

DIY toys (photo)

Constructor for balls

The parents spray-painted the necessary parts (pipes and fasteners), and then attached them to the fence so that small balls and beads could be thrown through the pipes.

Homemade toys for children

Experiments with liquids and sand

The parents attached several tubes to the perforated fiberboard, and attached a funnel to the top end of each tube so that they could easily pour liquid or pour sand, which would flow down through the tubes.

To better see the water flowing through the transparent tubes, you can pour it into several containers and add food coloring. So for each pipe there will be water of a certain color.

DIY toys from scrap materials

Cardboard labyrinth

To make such a toy you will need:

Carton

Scissors or utility knife

A set of sticks for children's crafts (can be replaced with cardboard)

Paints or stickers (to decorate the maze)

Hot glue (with glue gun)

A medium or large diameter coin or a plastic bottle cap

Pencil.

1. Take a suitable box and, if necessary, cut off one side so that you can build a maze inside it.

2. Prepare a set of sticks for children's crafts or simply cut cardboard into strips. As you create the maze, you will trim these strips with scissors.

3. Before starting construction of the labyrinth, it is better to draw it with a simple pencil, and then glue strips of cardboard or wooden sticks to the drawn lines.

4. Start gluing cardboard strips or sticks edgewise to the drawn lines with hot glue, trimming them where necessary.

5. To make “traps”, trace the coin with a pencil and, using a stationery knife, cut out a circle that will fit a ball, bead or ball. Cut the traps so that a bead or ball can pass by them.

If you want to keep the bead from falling on the floor, bend (and trim if necessary) the sides of the box and insert it inside another box (see image).

How to make a toy with your own hands

Toy car park made from a box and cardboard toilet paper rolls

You will need:

Box or crate

Toilet paper rolls

PVA glue or hot glue

Scissors

Acrylic paints (optional).

You need to glue the cardboard sleeves inside the box.

If necessary, cut each sleeve in half and then carefully glue.

You can make a helipad on top.

Decorate the craft as you like. You can use acrylic paints and stickers.

How to make a toy with your own hands (video)

Making a car with your own hands is a task worthy of a real man. Many people think about it, some take it on, and only a few bring it to completion. We decided to tell the stories of cars made, as they say, on the knee. We’ll talk about the work of professional body shops, including those like A:Level or ElMotors, another time.

The work of the masters of the East

It’s easy to find a video on the Internet about an entire factory of “homemade” supercars in Bangkok. These cost tens of times less than the original. Now it no longer works: apparently, the German journalists who made videos about home-made workers did them a disservice, and local authorities began to think about the missing licenses of the “masters” and the safety of the cars they riveted. It’s clear that these crafts were not specifically crash tested.

It is interesting that, in principle, the Thais maintained supercars - they made spatial frames from metal profiles and pipes and “dressed” them in fiberglass bodies. In most cases, do-it-yourselfers simply take old cars, cut off the “extra” body panels and attach their own. This technology is used, for example, to build this replica of the Bugatti Veyron from India. An ambitious project, right according to the saying “to love is like a queen, to steal is like a million.” The author and owner used an old Honda Civic as a basis. And he tried - outwardly the copy turned out to be worthy: it’s not for nothing that the audience looks at it so carefully.

Supercars from junkyards

The Chinese are not lagging behind their Thai and Indian colleagues. A young glass factory worker, Chen Yanxi, did not parody someone else’s design, but made his own, his own. And even though his car looks decent only from a distance, and only goes 40 km/h (the installed electric motor doesn’t allow it anymore), I don’t want to laugh at Chen. Well done for going your own way. More often it happens differently.

Three years ago, 26-year-old Chinese prop designer Li Weilei was so impressed by the Tumbler Batmobile from Christopher Nolan's The Dark Knight that he built one. It took him and four friends 70,000 yuan (about 11 thousand dollars) and only two months of work. Lee took the steel for the body from a landfill, shoveling 10 tons of metal. To help offset the costs, he now rents out his Tumbler for photo and video shoots for just 10 bucks a month. But tenants must be prepared to roll the “replica” by hand. The car cannot drive because it has no power unit, no functional helmsman. In addition, in China only cars produced by certified manufacturers are put on the road.

Another Chinese craftsman, Wang Jian from Jiangsu province, made his own “copy” of the Lamborghini Reventon from an old Nissan minivan and Volkswagen Santana sedan. And he also hauled metal from a landfill. I spent 60,000 yuan (9.5 thousand dollars) on this matter. The car has a carburetor engine, it smokes mercilessly, it does not have an interior or even glass, but the author himself likes the result, and the neighbors believe that Jian’s car is a fairly accurate copy of Lambo. The author claims that he is able to accelerate to 250 km/h in his supercar. No one risks dissuading him.

As you can see, most of all do-it-yourselfers love to copy Ferrari and Lamborghini. Externally. Inside this car, designed by Mr. Meath from Thailand, is a quarter-liter Lifan motorcycle engine.

The funniest and most touching creation is by Chinese farmer Guo from Zhengzhou. He made a Lambo for... his grandson. The car has children's dimensions - 900 by 1800 mm and an electric motor that allows it to accelerate to 40 km/h. A battery of five batteries is enough for 60 km of travel. Guo spent $815 and six months of work on his brainchild.

A Vietnamese car mechanic from Bac Giang province created a resemblance of a Rolls-Royce using a “seven”. I bought it for 10 million dong (about $500). He spent another 20 million on “tuning”. Most of the amount went to metal, electrodes and a radiator grille a la Rolls-Royce, ordered from a local workshop. It turned out rough. But the guy became famous. A real Rolls-Royce Phantom in Vietnam costs about 30 billion VND.

Samauto-2017

In the vastness former USSR The traditions of self-building are also strong. IN Soviet years there was a movement called “samauto”, which united enthusiasts homemade cars and motorcycles. And there were quite a few of them, since in those years it seemed that it was easier to assemble a car with your own hands than to buy it - despite the total shortage of spare parts and bureaucratic obstacles. And what interesting projects were born in those years! Yuna, Pangolina, Laura, Ichthyander and others... Yes, there were people. However, they remained.

Several years ago, I wrote about the brainchild of Muscovite Evgeniy Danilin called an SUV, reminiscent of the Hummer H1, but significantly superior to it in cross-country ability.

I immediately remember my long-standing acquaintance with Alexander Timashev from Bishkek. His workshop ZerDo Design created a whole series in the 2000s interesting homemade products, the first of which was the Barkhan, also a similarity to the Hummer based on the GAZ-66. Then the “Mad Cabin” appeared, a type of American hot rod, made from the cabin of the ZIL-157 army truck - “Zakhara”. .

The Crazy Cab was followed by homemade products in retro style - the so-called replicars, speedster and phaeton. And for them, Kyrgyz craftsmen made not only bodies and interiors, but even frames.

All parents benefit from conducting educational activities for their children. It would be good for every father to make toys with his own hands together with his children, setting a positive example for them. One of these toys could be a toy car.

There are a lot of photos of homemade machines on the Internet; all you have to do is choose the appropriate option for yourself and get down to business.

What car to make

To choose the appropriate type of craft for making, you should soberly assess your strengths and means. If a teenager decides to take up this process on his own, then he should start with simple ideas for do-it-yourself machines.

To begin with, you can choose a craft made from cardboard and paper. They are relatively simple to make, and the materials and tools are readily available. All you need is scissors, glue, and cardboard.

How to make paper cars if you have no experience in designing at all? Where should you start, and what are the next stages of work? These issues need to be taken seriously. The child must learn to set a task for himself and be able to solve it.

Cardboard racing car

Let's look at how to make a machine with your own hands. To do this you will need:

• cardboard cylinder;
• scissors;
• colored paper and plain paper;
• stationery pins;
• a set of felt-tip pens;
• white and black cardboard.

The body of the car will consist of a cylinder; it will be covered with paper of any color. 4 black wheels and 4 white wheels are cut out of additional cardboard.

Additional cardboard circles are glued to the end parts of the car so that there are no through holes in the cylinder. The glued circles can be painted with felt-tip pens.

The wheels are attached with push pins in the center of the circle, and their ends are bent from the inside of the cylinder. A small hole for the driver should be cut on top of the finished body. The finished car is painted with felt-tip pens.

Electronic machine with remote control

Children really like cars with remote control. If you don’t find a suitable model in the store, you can assemble it yourself. Today, every home with children is full of toy junk. There you can select suitable spare parts and bodywork.

You will need the following:

• wheels;
• frame;
• electric motor;
• different screwdrivers.

Build process

Most likely, some parts will have to be purchased. This applies to the control system. If a homemade machine has a simple control panel, it will be simpler and more cost-effective. When installing radio controls, you may have to spend more money on parts.

Having distributed the assembly plan and the dimensions of the device, you need to start assembling. The chassis must include wheels. The product itself must be error-free and easy to move. Good grip for the machine will be provided by wheels with rubber tires.

There are two types of motor. Its choice depends on the user who will manage it. If this is a child, then you need to install an electric motor. It will cost less; if possible, it can be removed from a broken toy car.

If the machine is intended for adult users, then you can install a gasoline engine on it. It will cost an order of magnitude more, and caring for it will be more difficult.

Wired controls will limit the movement of the machine. It is preferable to choose a radio unit, then the product will be able to move independently of the wires. But movement will also only take place within radio range.

The choice of body is determined by taste preferences. The variety of models today is simply huge, everything is limited by imagination and budget.

Having prepared all the elements, you need to begin installation. The chassis with wheels is mounted first. Next, the motor and radio are installed on the frame. An antenna is attached to the body. If all components were purchased in a store, installation instructions should be included.

The batteries are attached last. After debugging the engine, the housing is attached to the chassis. The final touch can be decorations from various stickers. The car is ready!

Homemade complex type machine

You can give other instructions on how to make a radio-controlled car. To do this you will need:

• Body of any model;
• Powerful 12V battery;
• Radio control;
• Charger;
• Soldering tool and all necessary components for it;
• Electrical measuring instruments;
• Rubber blanks for bumpers;

Installation process

The process of step-by-step assembly of the machine is much more complicated than the previous type. The suspension elements are assembled first. Then the gearbox with plastic gears is assembled.

To install it, a thread is made in the housing. Next, the motor is connected to power and its performance is checked.

Radio circuits are mounted in such a way that overheating does not occur. Sometimes a radiator is attached to them. At the end, the model body is assembled. That's all you need to make a radio-controlled car.

In order for a homemade car to have maneuverability and good speed, you must try not to overload it with unnecessary parts.

The presence of headlights and dimensions looks nice, but to attach them, wiring must be installed. As a result, this will complicate the design and assembly.

Photos of homemade cars