How to properly glue a mirror to the wall in the bathroom. How to glue a mirror in the bathroom How to glue a large mirror to a closet door

IN modern house The mirror has long become an interior item or even a highlight of the room design. Mirrors are installed in the bathroom, in the hallway, in the living room and even in the bedroom. From time to time, mirror glass has to be removed in order to make repairs, hang wallpaper and lay tiles. After re-gluing the wallpaper, the mirror panels return to their original places, and the question automatically arises of how to attach the mirror to the wall with wallpaper.

What prevents you from mounting a mirror on the wall?

A mirror is one of the few items that can be attached to walls anywhere and in unlimited quantities. There is even a certain interior design style that uses a large number of mirror panels of different designs. If you correctly position and secure mirrors on the walls, you can significantly change the perception of the room and even visually expand the boundaries.

Most owners, after renovation, do not want to drill into the walls and spoil the newly hung wallpaper. Most often they try to attach the mirror using adhesives; you just need to choose good glue and solve the problem of how to clean the wallpaper from dust after renovation.

But attaching mirror glass with glue is not as easy as it might seem at first glance. Most often, problems arise in the following situations:

• When trying to fix a mirror on recently pasted wallpaper. A small and relatively light mirror can stay on the wallpaper surface, but at the same time “pull” part of the wallpaper into an “accordion”. You cannot attach mirror glass directly to a fresh canvas, otherwise you will have to look for a way to remove wrinkles from the wallpaper after drying;
• In case the glass plate of the mirror needs to be attached to a water-based emulsion, latex, liquid wallpaper, plasterboard or a lime-whitened wall. None of the listed materials are friendly to glue and shear loads, so there is no point in trying to attach even a small mirror - the coating will peel off.

For your information! You should not try to attach a thin mirror to wallpaper using high-strength adhesive with strong shrinkage. In this case, the adhesive mass can create strong stress on the glass base; even a small load can lead to cracks.

Most high-strength adhesives based on alcohol, dichloroethane, and acetone have high shrinkage. The exception is epoxy adhesives, but due to their low viscosity, they are almost impossible to attach heavy objects to the walls of a room.

The opposite situation is also possible, when the wallpaper is glued to the wall with relatively weak CMC glue. In this case, attempting to attach heavy mirror glass with glue will result in the wallpaper breaking along with the mirror.

Is it possible to attach a mirror with glue?

In order to understand how to properly attach a mirror to wallpaper, let’s perform a small estimation calculation. Average weight of glass base wall mirror is 2.5 kg. The fastening technology involves applying an adhesive layer 1-2 cm wide over the entire horizontal width of the wallpaper base, which is approximately 60-61 cm.

As a result, the load on the gluing line is 2500:60=42g/cm2. For CMC, the maximum load ranges from 3 to 5 g/cm2, for the most durable polyurethane adhesive such as Molefix, the strength of the glued seam reaches 9 kg/cm2, and for cyanoacrylate, also known as cyacrine, the strength of the seam can reach 150 kg/cm2. The strength of silicone glue is 450 g/cm2.

Any of the synthetic adhesives is strong enough to attach even a heavy mirror to a wall with wallpaper. But it's not that simple. In order to attach a mirror to a wall with glue, three conditions must be met:

• The adhesive joint must have the same strength in any direction of load application. Using cyanoacrylate, you can glue a weight to the wall, but only if the load is directed normal to the surface. Under shearing and bending loads, the strength of the seam is reduced to 1.5 kg/cm 2 ;
• The adhesive mass must have very high adhesion to the base of the wall. It is best if the wall surface is coated with a polymer primer. It is almost impossible to apply on lime, cement-sand, gypsum plaster polyurethane, epoxy, silicone glue, the material simply does not stick to the base;
• The reverse side of mirror glass is coated with a special mastic or paint; the strength of the coating is low, and in addition, not all adhesives wet such a coating well. Therefore, before you try to attach a mirror with glue, you need to check the adhesion strength of the adhesive mass to the paint.

It is quite possible to attach a glass panel to a wall with wallpaper; the easiest way to do this is if the wallpaper panels were glued to a wall lined with plasterboard. You just need to carefully prepare the surface for gluing, figure out how to remove dust from the wallpaper after repairs, and select the most durable and at the same time elastic adhesive composition, which has increased adhesion to the coating on the back of the mirror. In order to attach a small mirror to the wallpaper, you need to prime and strengthen it with PVA or acrylic varnish. All that remains is to apply glue and fix the mirror on the wall while the glue dries.

Glue the mirror to the wall with wallpaper

First of all, you should not try to glue a glass slab to the wall, as they say, “on the fly”, simply by applying a certain amount of adhesive mass to the wallpaper and the return glass. If the walls were not previously covered with plasterboard before wallpapering, then, most likely, the reverse side of the glass base of the mirror will not be able to lie flat against the wall. Contact with the wall will be at a maximum of three points. Even if you cover the entire back side of the mirror with glue, the contact patch will be very small, no more than 10% of the area of ​​the glass base, which is clearly not enough to hold the glass firmly.

To attach the mirror with maximum strength, you will need to install an intermediate plate, for example, a small sheet of fiberboard. To make the transition plate, a rectangular piece of fiberboard is cut out, with an area of ​​30-40% of the surface of the glass sheet. First you will need to determine the optimal position of the mirror on the wall, make marks with chalk or a simple pencil.

Next, you will need to secure the fiberboard rectangle to the wall. This can be done using ordinary plastic plugs and screws. To attach a mirror weighing 3 kg to the wall, you will need four self-tapping screws. Before screwing in the screws, the edges of the holes drilled in the plate are trimmed with an 8 mm drill and treated with PVA so that the heads fit flush into the fiberboard and do not tear the plate material under load. The intermediate plate should be placed in the upper half of the mirror contour markings made, with the smooth side facing up.

Important! When screwing in self-tapping screws, it is necessary to control the plane of the fiberboard plate using the level and depth of screwing in the fastener.

Medium-sized mirrors can be attached to the plate using silicone glue. Heavy and massive objects are attached only with polyurethane adhesives. Subsequently, if necessary, everything can be removed using a thin string, which cuts the silicone layer like butter.

It is known from practice that the least suitable for fixing mirrors are:

• Polyurethane foam;
• Sealing silicone sealants;
• Solid polyethylene adhesives for hot glue guns;
• All types of paint, including acrylic, alkyd oil, polyurethane and epoxy;
• Adhesive compositions for gluing rubber.

Any of the listed materials does not provide a sufficiently strong and stable seam with high adhesion. As a rule, all attempts to attach a mirror panel end in failure. Instead of glue, you can use double-sided construction tape good quality.

Mechanical mirror mounting options

The weight of mirrors can reach 10 kilograms or more, so it is not always possible to attach a massive glass slab adhesive composition on the relatively weak surface of the wallpaper. In this case, reliable fixation can only be achieved using mechanical fastening.

Most often, two options are used to securely mount a mirror:

• Picture hanger on a string or wire;
• Hook on hooks and bars glued into the wall.

Anyway mechanical method has fastenings undeniable advantage before adhesive options. Firstly, attaching a mirror can be much faster and easier, Secondly, if necessary, it can be quickly and painlessly removed, for example, when cleaning or painting wallpaper. If you attach the glass with glue, it will be almost impossible to remove it without damaging the wallpaper.

Mechanical mounts for mirrors

Most in a simple way The fastener is a picture hanger. If mirror glass is installed in wood, metal or even plastic frame, then you can attach the structure to the wall in half an hour of work. The mounting scheme is very simple, but you will first need to make mounting points on the frame.

If the thickness of the frame allows, then it is enough to screw one self-tapping screw into each of the sides from the back of the frame, stepping back 10-15 cm from the top edge. If the frame is too thin, then instead of self-tapping screws, you can glue two aluminum plates with hooks. Between the screws or hooks we stretch a thin steel wire or a strong nylon cord with a slight slack.

According to the markings on the wall, we hammer in a dowel or plug under the self-tapping screw. We screw a small anchor hook into the cork, after which you can hang the mirror glass. The above diagram allows you not only to securely attach it, but also to align the structure, remove it and hang it back in a matter of minutes. In this way, you can attach relatively small objects to a brick or concrete wall.

Heavier mirrors can be attached using a hidden block. Before wallpapering, a niche 30-35 mm wide and 20 mm deep is cut out in the wall using a puncher to cover the entire width of the future mirror. On the end surface wooden block A longitudinal groove of 10x10 mm is milled. The block is secured in the niche using dowels, and the groove should protrude beyond the plane of the wall by 2 mm. Next, all that remains is to tighten the cord in the same way as in the previous case and attach the mirror to the wall.

If there is no frame, the process will become slightly more complicated; you will need to glue a wooden or metal plate with ready-made screwed hooks or holes for fastening hanging cord. Sometimes they try to attach the structure using hooks installed on the intermediate plate. The strength of such a suspension will be no worse than that of a wire system, but in this case it will be very difficult to level the mirror horizontally.

Conclusion

Each hanging method is suitable for its own type of wall. For brick and plastered concrete walls It is best to attach the mirror to a picture hanger to plasterboard You can use polyurethane or silicone glue, but with the obligatory sizing and priming of the wallpaper with polyvinyl acetate emulsion. If you need to attach any structure to tiles, glass, mirror, then the only possible option There will be silicone glue, but not sealant. Good adhesion and high elasticity of the silicone seam guarantees high strength for several years of operation, after which the fasteners need to be updated.

If you need to glue a mirror to any surface in your apartment or house, and you don’t know how to do it, this article is especially for you.

A mirror is an element that no interior can do without. modern home. A mirror is necessary in the wardrobe, in the hall, in the bathroom and many other places. A mirror can perform both practical functions, and be part of the design of the room, or serve for both. Installing a mirror is quite simple when it is part of furniture or a ready-made mirror with a frame and fasteners. But sometimes, when decorating a room or later, you just need to stick a mirror on the wall, it can be either a small or a huge mirror, say from floor to ceiling. This is not an easy task, let’s talk about how to properly glue a mirror.

First, let's decide on the size of the mirror before ordering it from the masters. We measure the dimensions of the future mirror to the nearest millimeter, leaving a margin of 4-5mm around the entire perimeter. If you are planning to glue a bathroom mirror to the wall, I advise you to leave at least a 4 mm gap for further grouting.

The main thing to remember is that the edges of the mirror should not touch other finishing elements. Otherwise the mirror will crack. It is very difficult to cut a mirror at home; the work done by craftsmen will be distinguished by its correct geometric shape.

When you pick up the mirror from the workshop, pay attention to its edges. They must be processed and rounded. This is necessary so that the mirror sticker is safe and we don’t cut ourselves.

Depending on what you are going to glue the mirror on, you can use various methods fastening.

Gluing a mirror to the wall

First of all, we prepare the wall for gluing the mirror. We clean out all the irregularities and treat them with a deep impregnation primer to ensure the best adhesion to the glue.

We definitely use special glue, it’s called mirror glue (it looks the same as liquid nails, but is guaranteed to have adhesion to the mirror amalgam).

Next, we proceed directly to the process of gluing the mirror. We will need thick, double-sided tape, pieces of 10-15 cm, which we paste about 60-70 cm on the back side of the mirror. We need adhesive tape to hold our mirror until the glue sets. When the tape is pasted, remove the protective part from it and then, using a gun, apply glue along the edges and along the entire back surface of the mirror, at least 15-20 cm between the stripes. And immediately attach the mirror to the wall.

The lower part of the mirror must rest on something to give the glue time to dry. Also make sure that there is a gap around the entire perimeter. The entire surface must be carefully and thoroughly pressed against the wall. The glue sets within 20-30 minutes, and completely dries no earlier than after 24 hours.

The mirror can also be glued to the cabinet door, thereby updating the interior of the room. Because the mirror will not be used big size then use special double-sided tape for mirrors. First, it is glued along the perimeter to the back wall of the mirror, then at regular intervals of 40 centimeters it is supplemented with vertical strips of tape. After this, the mirror is carefully glued to the cabinet door. We advise you to mark the boundaries of the future mirror on the cabinet in advance with a pencil.

Gluing a mirror to ceramic tiles

The mirror easily adheres to ceramic tiles. In this case, the same special glue for mirrors is used. The glue is applied in a continuous layer around the perimeter of the mirror. The distance from the edge should be at least 2 cm. The middle of the mirror must also be coated with lattice-type glue.

The procedure for gluing a mirror to ceramic tiles is very similar to the procedure for attaching a mirror to a wall. Only in this case, after the glue has dried, we cover the edges with sealant. It can be transparent or white. We select the one that will look better.

If the mirror is very large, right on the entire wall, then we recommend securing it mechanically for safety reasons. We drill the mirror itself at low speeds with a diamond-coated tubular drill or a special glass pen. We drill out the wall in these places with a hammer drill. And we secure our mirror with a decorative glossy bolt.

Remember that to work with large mirrors You definitely need 2 people and hand protection against cuts (ordinary fabric gloves).

Now you know how to glue a mirror, you can safely start implementing your design ideas.

A mirror is a useful and multifunctional thing, because it is needed not only so that all household members can admire their reflection, but also in order to visually expand the walls, make rooms larger and brighter.

Mirrors are needed in almost every room, everyone understands this, but not everyone knows exactly how to properly attach a mirror to the wall. Previously, when chemical industry was not so developed, there was only one way out - the craftsmen drilled the walls and attached the mirrors with screws. But today the situation is simpler, because you can simply glue them - to a wall, a cabinet, a tile in the bathroom!

Many craftsmen take risks and use double-sided tape for this purpose. However, adhesive tape is not as reliable as special tape high-quality composition, so it’s wiser to use liquid nails or mirror glue.

Criteria for quality glue

All professionals unanimously recommend using exclusively special compounds that say Mirrors, that is, “for mirrors.” It’s definitely not worth taking universal ones. High-quality, professional mirror glue has the following properties:

• the product should not contain alkalis or acids;
• it should be harmless to the amalgam (even if it is painted over), because often the mirror needs to be glued without a backing in the form of plywood or chipboard;
• the composition must have a pH suitable for glass;

• do not emit too strong a chemical odor;
• have high adhesion to amalgam;
• It is desirable that the composition be white or transparent.

Technology

Before proceeding directly to the attachment, you should prepare the surfaces. The wall must be cleaned of all existing irregularities and bumps, then it is advisable to treat it with a deeply impregnating primer - this will give good adhesion in the future.

The next step is the process of gluing the mirror. For work you will need: thick double-sided tape (15 cm tapes), special composition. The adhesive tape needs to be attached to the back of the mirror, in strips, every 50 cm. It will hold a fairly heavy object until the composition sets. Then you need to remove the protective part from it. Next, glue dots should be applied to the entire surface; it is more convenient to do this using a gun. The composition must be applied along the edges and over the entire surface, after approximately 10-15 cm, between strips of tape. That's it, now you need to quickly attach the mirror to the wall and press it hard.

At this moment, you need to ensure that there is a gap around the entire perimeter of the attached object. It is necessary to press evenly over the entire surface, carefully but gently. The composition will set in about half an hour, and will dry completely after a day. To be one hundred percent sure of the result, it is advisable to fix the attached object. You can press it down with a heavy object wrapped in cloth, and prop it up with a table or chair from below.

The mounting composition TITAN 930 is specifically designed for attaching mirrors to wood, concrete, ceramic tiles, stone, metal, and cabinet doors. It has proven itself quite well - it does not spoil the amalgam, is moisture resistant (suitable for work in the bathroom), and produces an elastic but durable seam. The consumption of TITANIUM is quite moderate - it is approximately 300-500 grams per 1 square meter.

The composition of Ottoseal S16 is silicone, neutral, one-component, aloxide based. Excellent adhesion to any mirror coatings, does not harm them, suitable for plastic, ceramics, glass, steel, wood, concrete. You can also work with plexiglass products. This product is more suitable for working with mirrors with protective coating, it must comply with DIN 1238 5.1 and DIN EN 1036.

Dr.Schenk glue also works well - it does not harm the amalgam of mirrors and is resistant to water, alcohol, and salt. With its help you can attach it to any surface, you can even work with the composition in the bathroom.

A mirror is a fragile and quite expensive object, so it must be glued exclusively using high-quality and proven glue. By following the technology, you can get a guaranteed reliable grip.

If you don’t know how and with what to glue a mirror to any surface, then you should definitely read this article. Firstly, let's start with the fact that in everyday life there are many situations related to the construction of mirrors, in which the basis for gluing can be various surfaces. Therefore, we will consider several options that are most often encountered in life.

Attention! To glue the mirror, you can use special glue for mirrors, which does not spoil the amalgam on the back side. Sometimes craftsmen use liquid nails.

How to glue a mirror to a wall

First of all, it is necessary to prepare the wall surface.

1. It is cleaned of irregularities.
2. Prime using a deep penetration liquid primer.

Now the mirror itself is being prepared. Several strips of double-sided tape are glued to it on the back side. They are designed to support the mirror until the glue dries completely. Now you can apply the adhesive itself. The best option is to apply glue along the entire perimeter and over the rest of the area in stripes every 15-20 cm.

Now you can attach the mirror to the wall. You need to support it with something from the bottom edge so that the mirror under own weight didn't move off the wall. Usually after half an hour the support can be removed, but the glue will finally dry only after a day.

How to glue a mirror in the bathroom

Usually placed on the walls in the bathroom ceramic tile. You can also glue a mirror onto it without any problems. This technology is not much different from the previous one. The only difference is final stage, in which a sealant is used. They close the gap around the entire perimeter between ceramic wall and the mirror itself. If the mirror has big sizes, and therefore the weight, then to ensure that it does not fall off at once, it is necessary to carry out additional fastening with self-tapping screws.

How to glue a mirror to a mirror

There is nothing complicated here either. Although you still have to work hard. Let's consider two gluing options.

1. Bonding is done by surfaces. This is when there is a need to stick a new mirror onto an old one, which is not possible to remove. We act in exactly the same way as in the first two cases.
2. Two mirrors are glued together with edges to increase the mirror area. This difficult process, requiring high precision. If both mirrors will subsequently be glued to the wall, then it is better to glue them separately, exactly placing them on the surface. If the prefabricated structure will be hung, both mirrors must be glued on their edges with the same adhesive. Note that this is a very unreliable mount, which is used very rarely.

How to glue a rearview mirror

In this case, you will need a special two-component glue, which can be purchased at a car store.

1. First, the installation site on the windshield and the rear part of the mirror stand are cleaned. Usually all this is cleaned of the remnants of old glue. Then degreasing is carried out using alcohol. Be sure to dry the surfaces well.
2. The bracket and holder are removed from the mirror to facilitate the design.
3. A special mesh tape is supplied with the glue. A blank is cut from it to fit the dimensions of the mirror stand.
4. The blank is glued exactly to the place where the mirror is installed.
5. After which the glue is applied to the prepared plane of the mirror stand, and all this is attached to the mesh with slight pressure.
6. Hold for about 15 minutes, then remove the glue that protrudes from the edges and leave it all for a day. After which you can hang the bracket and holder.

If you are interested in other fastening methods, then read the article

There comes a time when the usual surroundings become boring. I want to change something, update something old interior, add some detail or make good repair. The best way update the room, make it brighter, perhaps even increase the space - attach a mirror to the closet. You purchased new furniture, you need to glue a mirror to a cabinet door, and you don’t know how to do it correctly, let’s look at individual mounting methods.

The best way to update a room, make it brighter, and perhaps even increase the space, is to attach a mirror to the closet.

We apply “Liquid nails” or silicone to the mirror surface in parallel lines at equal intervals.

How to glue a mirror to a cabinet? How to do this job correctly? There are several ways to glue a mirror.

You have purchased new furniture, you need to glue a mirror to the cabinet door, and you don’t know how to do it correctly, let’s look at individual fastening methods.

Most best option– gluing the mirror onto colorless construction silicone.

Attention! Which gluing option to choose is up to you to decide. The main thing is not to rush, do all the work scrupulously, approach the matter responsibly, then the mirror will be attached firmly enough and will last a long time.

How to glue a mirror to a cabinet?

Remove the protective stickers from the tape.

Necessary materials

Before you begin, you need to prepare the following materials: mirror, liquid nails, glue or silicone for gluing the mirror, double-sided tape, masking tape, degreaser.

There are several ways to glue a mirror.

Now you need to wait for the glue to dry.

Required Tools

The following tools will be useful: sandpaper, mounting gun, pencil, ruler or tape measure. If you are going to screw the mirror onto the mount, then you will need a drill, a screwdriver, screwdrivers, regular drills, a diamond drill (to make a hole in the mirror), and a special mount for mirrors.

Which gluing option to choose is up to you to decide.

If you decide not to use “liquid nails”, but to attach them to the legs, then you need to make sure that they are manufactured accurately in height and, if necessary, install spacers.

Fastening process: step-by-step instructions

So, you stocked up on all the materials and tools, purchased a mirror the right size. It is preferable if its back side is protected with a special film, which, if the mirror breaks, will prevent fragments from falling off. Now let's get to work.

You can use fine sandpaper for better adhesion of the glue.

Before fixing the mirror, you need to place a soft layer, and then press the mirror with paws.

First, remove the cabinet door. To make it easier to work with, you need to place it in a horizontal position. Using a pencil, draw marking lines on the surface. Use a degreaser to clean the door, then the mirror. You can use fine sandpaper for better adhesion of the glue. Use a brush to remove all the dust.

Use a degreaser to clean the door, then the mirror.

If the mirror has ready-made holes, you can use special screws instead of the tabs.

We apply “Liquid nails” or silicone to the mirror surface in parallel lines at equal intervals. We glue strips between them for auxiliary fastening. double sided tape. The best option is to glue the mirror onto colorless silicone for construction. There is no need to use only adhesive tape, since a mirror glued in this way may fall after some time, especially when the room is very warm or you are doing work in the summer.

First, remove the cabinet door.

To prevent the glass from cracking, the mirror surface must be wetted all the time or a side made of plasticine must be made and water poured into it.

Remove the protective stickers from the tape. We fix the long edge of the mirror on the marking line. Slowly, we lower the mirror surface, trying to prevent displacement. It is better if an assistant works with you. He will make sure that the mirror lies flat, without going beyond the applied markings. That's it, the mirror is glued. Now you need to wait for the glue to dry. Optimally, a day is allotted for this. The door can be secured in place.

So, you stocked up on all the materials and tools and purchased a mirror of the required size.

The mirror should lie on cardboard or fabric.

If you decide not to use “liquid nails”, but to attach them to the legs, then you need to make sure that they are manufactured accurately in height and, if necessary, install spacers. They should be close to the mirror, but without tension. You also remove the door from the cabinet, lay it horizontally, mark where the holes for fastening the tabs should be, screw them, and bend them. Before fixing the mirror, you need to place a soft layer, and then press the mirror with paws.

The following tools will be useful: sandpaper, mounting gun, pencil, ruler or tape measure.

Gluing a mirror to a cabinet door is not that difficult; all the work must be done very carefully.

If the mirror has ready-made holes, you can use special screws instead of the tabs. In case there are no holes, they are drilled with a diamond drill in the corners. To prevent the glass from cracking, the mirror surface must be wetted all the time or a side made of plasticine must be made and water poured into it. The mirror should lie on cardboard or fabric. Plastic washers must be inserted under the screw heads.

Before you begin, you need to prepare your materials.

As a result, the interior of the room will be greatly transformed.

Gluing a mirror to a cabinet door is not that difficult; all the work must be done very carefully. As a result, the interior of the room will be greatly transformed. It is not necessary for the mirror to be rectangular or square. It can be of any original shape. It is important that it fits the overall situation.

The main thing is not to rush, do all the work scrupulously, approach the matter responsibly, then the mirror will be attached firmly enough and will last a long time.

It is not necessary for the mirror to be rectangular or square.

It is important that it fits the overall situation.

VIDEO: How to glue a mirror. Mirror swing door for furniture.