DIY laundry organizer step by step. Linen organizer - everything should be in order! Fabric hanging organizer

04/17/2019 2 1,894 views

How to create an organizer for underwear with your own hands? Step-by-step instructions will help you make a small storage unit even from ordinary materials that you often have on hand. This is great, because you never want to spend money on purchased containers.

After reading this text, you will learn how you can make a container for storing laundry from ordinary milk cartons or wide fabric strips.

Necessary materials

The step-by-step instructions for sewing an organizer are quite simple, no matter what material you choose to create a laundry container. But for successful creation To create an organizer with your own hands, you need to prepare some materials in advance. First, let's decide what you want to construct your organizer from: cardboard or fabric.

Cardboard is usually placed in a closet or chest of drawers. Therefore, in addition to the future storage space for the container, you need to take care of the timely purchase of a ruler, a simple pencil or marker, cardboard (you can immediately cut the shape in accordance with the width and length of the box), a stationery knife or small scissors.

A large piece of fabric in a color that will fit into your interior or is simply pleasing to the eye, scissors, strong thread, tailor’s pins and needles will help you sew a laundry organizer with your own hands from fabric. You may also need tailor's lined paper, since it is quite difficult to design a laundry organizer without a diagram.

How to make an underwear organizer out of cardboard with your own hands?

This option will be cheap, but its manufacture requires a good eye. But you need to start by finding a sheet of cardboard.

• First you need to measure the width, height and length of the laundry storage box. Next, you need to calculate the number of strips needed.

• In order not to spoil anything, you need to be safe. And an ordinary pattern on lined or sewing paper can help with this.

• All strips must have the same width and height. Only then will you be able to properly plan the creation of a laundry organizer and (no less important) successfully install it in the drawer.

• Next you should mark the cut lines. On long strips, you need to make three cuts half the width of the strip, and on short ones, two are enough. What is the main feature? The width should be equal to the thickness of the partition.

• The cuts must be made as carefully as possible. It’s better to make a smaller cut and enlarge it if necessary than to ruin the part. To strengthen the partitions, you can cover them with varnish or tape.

• The last step is to connect the pieces and place them directly into the dresser drawer for storing underwear.

Take the measurements of the box in which the laundry container will be stored responsibly. Otherwise, there is a risk that the product simply will not fit into it. Just in case, you should leave two centimeters in reserve.

Making an organizer from cardboard may require some financial investment. To minimize the cost of an organizer, you can use simple milk cartons as the material.

1. Alternative way Making storage for underwear from cardboard with your own hands can be considered creating an organizer from milk or kefir bags. Free people appear at home at least once every two days.
2. Of course, you need to treat the boxes before putting laundry in them. Start by cutting the tops off so that they all fit into the box. Then, using soap, wash inner part packages.
3. Fasten the bags together using a stapler or strong glue using the “Moment” type. On top, to add aesthetic value, you can coat the product with aerosol colored paint. All that remains is to put it in the box.

How to sew an organizer from fabric?

The advantage of making an organizer from fabric is that this option will last longer. In addition, the fabric will not be damaged if you accidentally spill some liquid cosmetics on it.

• If you are not enthusiastic about using cardboard or want to create a homemade travel organizer, consumables fabric should come out - a tape 12 millimeters wide, cardboard for the base.

• First of all, you need to draw a drawing of a laundry organizer on paper, and then transfer it to cardboard. Consider the dimensions of the box in which you plan to place the resulting product.

• The following cutting is considered standard: five strips of 18, 36, 45, 54 and 27 centimeters, respectively (remember the allowance of two centimeters for stitching), twelve internal walls of nine centimeters and two pieces of eight, external parts of the walls of 4 strips of 36 centimeters with allowances and a bottom format of 36 by 36 centimeters. It will turn out to be fabric if you sew all the specified details correctly.

• Fold the partitions in half and sew the top edge. Then you should sew all the strips in accordance with the markings (according to it, the first three rows include four small compartments, and the last - four large ones).

• The partitions need to be sewn in such a way that there is a margin of 50 millimeters above and below the edge of the fabric strips. This will allow you to then sew the bottom to the bottom (you can sew it with a zipper to make it easier to fold the storage.
• Next, you need to strengthen the walls with cardboard (just insert it into the double-leaf walls) and cover the edges with tape. In this case, you won’t have to worry about the strength of the organizer and install it in your chest of drawers.

Video: how to make an organizer for underwear with your own hands?

Many of us like it when order reigns on the shelves of closets and chests of drawers and every thing is in its place. For those who want to save money on their purchase finished product, we suggest making a laundry organizer quickly and easily with your own hands.

Everyone knows that the more careful you treat things, the longer they will last. Items of clothing lying in a pile of rags in closets will soon lose appearance. Special organizers will help you get rid of the mess. With their help, things will be stored neatly, each in its place. A laundry organizer is a rectangular or square box with several compartments for items. At its base lies a rigid frame. It is best to place it in a chest of drawers. In this case, the box will be reliably protected from dust and sun rays. It is best to choose a light material for it, but not easily soiled.

Stores are ready to offer boxes of all colors and modifications. We would like to introduce you to master classes that will demonstrate that making an organizer is a very simple task.

Making your own laundry organizer from fabric quickly and easily

For those who know how to sew and want to clean up their linen closet, we have prepared a photo guide. It illustrates the making of a fabric organizer.

• thick colored fabric;
• thinner contrast fabric;
• padding polyester;
• wide braid for finishing edges;

1. Cut from thick fabric and padding polyester two rectangles. They should be slightly smaller in size than the dimensions of the box so that the future box does not become deformed.
2. Sew the longitudinal partitions of the organizer. To do this, you need to sew long rectangles of contrasting fabric onto a padding polyester base. The length is the same as the base, and the width is double the height of the walls of the box.
3. Sew the rectangles in the middle, fold them so that the seam is on the inside. Thus, a double partition is created.

1. Draw the workpiece based on the number of cells needed.
2. Sew large rectangles, retreating from the edge by one and a half centimeters.
3. Calculate the sizes of small partitions. Take the width into account taking into account seam allowances, and make the height a little smaller.
4. Sew partitions from fabric folded in half. Turn the pieces right side out.

1. Sew each small partition in turn on both sides. It is better to do the work on your hands.

1. Sew the two halves of the edges of the blanks. Steam, hide the seam inside and stitch.
2. Edge the top of all partitions with braid.
3. Sew the main rectangular walls around the perimeter of the product, and the edges of the partitions to them manually.
4. Attach the rectangle cut out at the beginning of the work to the padding polyester. You can decorate the bottom with any seam, but it is better to work with a zigzag. The threads will not come loose during use.
5. Finish edges and outer corners with tape. The laundry organizer is ready.

Thanks to the synthetic padding at the base of the frame, such a box can be washed several times a year.

Trying to make a practical organizer out of cardboard

We offer the following master class to those who do not know how or do not want to sew an organizer. Let's make it out of boxes. Upon completion of the work, you will receive a stylish box for storing linen.

• cardboard box;
• vinyl wallpaper or glossy magazine covers;
• wallpaper glue;
• brush;
• stationery: long ruler, pencil, scissors, stapler.

1. Take measurements from drawer, in which the future box will be located. Based on these dimensions, you need to select a suitable box. It is advisable that the dimensions of the box be one centimeter smaller sizes drawer, since after pasting the thickness of the organizer will increase.

1. Cut the top of the box one centimeter lower than the height of the box. Use scraps as partitions. Carefully disassemble the box.
2. Cover the box with wallpaper and cover the bottom separately.

1. Determine what size the cells will be. Based on these data, cut out partitions from cardboard along the length and width of the organizer.
2. Cover the partitions with wallpaper and then cut out special grooves in them. Thanks to the grooves, they are easily inserted into one another.
3. Secure the finished structure with glue and a stapler and let it dry.

Instead of wallpaper, you can use fabric for work. It is glued to the cardboard using PVA glue. Since such a box cannot be washed, it is better to choose dark shades of fabric. To give your organizer a finished look, decorate it with lace, beads or other decorative elements.

Training video on the topic of the article

We have posted several video lessons. With their help, you can do it in just a few hours. stylish organizer for your favorite lingerie.

A cluttered closet negatively affects everyone. Necessary things get lost, searching for them takes time and makes you nervous. It’s impossible to find the right item, your mood deteriorates, and this affects your work and relationships with people. In such a situation, an organizer will help. For storing any small items, an organizer is the best solution.

Previously, women's underwear was of a respectable size, it was easy to store it in the closet and it was difficult not to notice it there. Now the underwear is miniature, in the chest of drawers, no matter how you fold it, it gets mixed up, hooks cling to each other, the straps intertwine. That's why we came up with laundry organizers. Don't buy them from the store; they are expensive and may not be the right size for your cabinets. We recommend making an organizer for underwear with your own hands.

Cardboard box organizer

How to make an organizer? The classic version of a DIY organizer is made from a cardboard box.

Step-by-step instruction.

For this you will need:

• cardboard box;
• ruler;
• pen;
• glue;
• scissors;
• paper or fabric for pasting.

First you need measure your dresser drawers. Then choose the appropriate box a little smaller internal dimensions drawer so that the box fits easily and does not break. If the right box is not found, then it is not difficult to make it from large pieces cardboard You can ask for a box at any nearby store. Pay attention to the quality of the cardboard so that it is dense but cuts well.

When the box is selected and easily fits in the box, you need to cover it with cloth or paper. The fabric is more durable and the organizer will last a long time. We glue the box on all sides. It is advisable to choose fabric or paper of light colors, but not easily stained.

Next step: think about what things you will store here, what size cells you need to make for them and how many of them you will get in this box.

Mark the box. Try on what size partitions you need; their height should be 1 cm below the box. Cover them with the same cloth or paper. Make slits in the transverse partitions, leaving 1-1.5 cm to the end of the strip. Assemble the inside of the organizer. First, install the longitudinal partitions and glue them to the base of the box, put the transverse partitions on them.

Insert the organizer into place, lay out your underwear. Place one item in each cell. Place the cups of the bras one inside the other, place the straps inside, place the bra on the edge. Roll panties and socks into neat rolls and insert them into the cell.

Now in a matter of seconds you will find your item. To store bodysuits and T-shirts, you need to make another organizer with large cells.

Fabric organizer

Anyone who knows how and loves to sew can make an organizer out of fabric.

You will need:

• thick colored fabric;
• padding polyester;
• threads, scissors;
• centimeter.

Cut two rectangles from thick fabric slightly smaller than the bottom of the box and one rectangle of padding polyester. This will be the bottom. Now, in accordance with its dimensions, cut out the side panels from fabric and padding polyester. Cut the fabric to such a height that you can fold it in half, insert the filling inside and you will get double sides. We also sew long longitudinal partitions. First, fold the cut out rectangles with the front side inward, stitch along the sides, insert the filler, turn it inside out, and stitch around the perimeter.

Then we measure what size the small transverse partitions will be and sew them according to the same principle. The edges of all partitions must be edged with braid.

We sew the bottom on three sides, turn it inside out, insert the filler, stitch around the perimeter. We sew on the sides, then the longitudinal partitions, using your hands. We sew small transverse partitions by hand between the longitudinal partitions. We hand-edge the corners and outer edges with braid.

Fabric hanging organizer

To unload drawers in a closet, you can make a hanging organizer from fabric. You need to take colored thick fabric of any size. Mark on it where the pockets will be. Then, along the marked lines, sew strips of 12-15 cm onto it.

Before sewing on the stripes, edge the top edge with braid or contrasting fabric. We sew the strips onto the fabric on three sides, leaving the top edged edge free. Sew the strips crosswise to create pockets. Cover the entire product with braid, throw the top edge over a regular clothes hanger and stitch.

Now you can hang it inside the closet next to your clothes. This organizer can be used in the hallway to store small items: mittens, ribbons, comb. Can be hung on the bathroom wall to store tubes of creams, pastes, and body care products.

Advice. If you plan to use it in the bathroom, then it is better to make it from transparent waterproof materials.

A hanging organizer is also needed in the kitchen. You can only change the size of the pockets according to the sizes kitchen utensils.

Ways to create organizers without boxes

The organizer for underwear looks impressive in the form of hexagons - honeycombs. To do this, you need to cut out as many hexagons from thick cardboard as will fit on the bottom of the chest of drawers. Then cut strips of cardboard twice as high as the sides of the box. Fold the strips in half. If the double strip is higher than the sides, then the excess must be cut off. Place hexagons on the bottom of the box. Lay the strips around them, fixing them with glue to form hexagonal cells similar to honeycombs.

There are other options for organizers in the chest of drawers. As cells, you can use identical empty plastic jars, which can be glued to a cardboard base so that the jars do not move, and place the entire structure in a box.

How to make an organizer for absent-minded people. People often leave the house in a hurry and then remember that they forgot to take important and necessary little things. We have to go back. In such a situation, an organizer that can be hung on a handle will help. front door. Keys, glasses, business cards are placed in his pockets. Walking past the front door and holding its handle, no one will forget these little things when they see them in their pocket.

Instructions:

• You need - thick fabric, braid, bias tape, plastic folder.
• Product size 13x25 cm.
• Cut out two parts.
• We make pockets, cut out two rectangles and fold them in half, it turns out to be 13x10 cm. We sew them, turn them inside out.
• The second pocket is 13x18 cm, we sew it in the same way.
• We make a back pocket 12x28 cm, fold it in half and sew it too.
• We assemble the organizer and put a plastic base inside so that it does not lose its shape.
• We sew all the parts together with the braid to make a loop, and hang our product on the handle of the front door.
• We process the edges around the perimeter with bias tape.

When preparing to leave, we put all the little things in our pockets in advance; when we leave, we will no longer be able to forget them when we take hold of the door handle.

To maintain a good, friendly mood in the family great value It has order in the house, in the closet, in all rooms. A little ingenuity, imagination, time and order will be restored, thanks to such a little thing as a DIY organizer out of the box.

Let's not leave chaos a chance!

Video

Watch a tutorial on making an underwear organizer from a cardboard shoe box.

Necessary materials and tools:
- box (you can use a box for shoes or small household appliances) – a frame for a future organizer. To ensure that the organizer is strong, it is better to use a box made of thick thick cardboard.
- cardboard;
- a piece of fabric for finishing;
- scissors;
- Ruler and pencil;
- threads (for internal seams and finishing external cuts) and needles;
- PVA glue.

Robot stages:
1. Prepare all the materials needed for the master class. The manufacturing process will be more enjoyable and faster if everything you need is at hand. It is better to use thick fabric. It is better to choose the color of the fabric so that there is no need to wash the organizer covers too often.

2. First of all, you need to decide how many cells you need. Be sure to check whether the size you choose is suitable for your underwear. It is worth keeping in mind that the sizes of men's and women's underwear differ significantly. At the bottom of the box, draw a grid for future cells. Depending on the size and number of cells, it is worth calculating how many parts you need. Cut out parts for the organizer partitions from thick cardboard. Make slots on the finished parts to fasten the partitions. Fold the finished parts into a grid shape.

3. Using dividers, cut pieces of fabric. Allow seam allowance at the edges to ensure a neat appearance. Glue the finished partitions with fabric using PVA glue. Leave the partitions to dry under pressure overnight. When the partitions are completely dry, trim off the excess edges and threads. Cut slits in the partitions to connect the cells. Pva glue perfectly connects fabric and paper or cardboard without leaving marks on the fabric. Super glue can leave dark marks on fabric. PVA glue is non-toxic, so you don't need to use gloves while working, and it won't pose any risk to your laundry.

4. Sew an outer cover for the organizer. Take measurements of the box. Using a pencil, draw a rectangle on the fabric that will correspond to the size of the box (covering the bottom and outer walls). To make sewing more convenient, the folds of the fabric can be ironed. On the wrong side of the fabric, sew with a regular basting stitch in the shape of a cover. It is not necessary to process the outer edges of the cover; the edges will be covered by the inner cover. At the piece of fabric for the future cover, trim off the excess fabric that is formed when sewing the cover.

5. Sew the inner cover for the organizer. We sew the inner cover in the same way as the outer cover.
6. The outer edges of the inner cover should be sewn with decorative threads. This will protect the fabric from spilling threads and give the case completeness and neatness.

In every home there are many small things that are usually simply thrown into a drawer or closet. It’s not very convenient to store them like this - everything seems to be in place, but at the same time everything lies in a big heap in which there is no logic or order. But you want to find and get it easily and quickly the right thing without unnecessary movements and just as quickly put it in place after use. For this case, special separators were invented. You can buy them, or you can make them yourself. How to make drawer dividers with your own hands without spending a lot of time and money?

Cabinets, drawers, special baskets or boxes and other items, the purpose of which is to simplify the storage of things and put things in order, are called the clever phrase “storage systems”. They are necessary for order and comfort in the house, otherwise, when everything is piled up in one pile of things, there can be no talk of any comfort. It is also impossible to quickly find the small item you need if it does not have its own permanent, strictly designated place. But if the storage of things in the house is organized correctly, then there will be no clutter, everything will be in its place, significantly simplifying a person’s life.

On a note! Storage systems also allow you to optimize the free space in your home without cluttering it.

Storage systems can be different in type and type, in size and purpose of use. So, first of all, they can be divided into open, which include hangers, window sills, shelves, and closed– these are cabinets, drawers, chests of drawers, etc. Inside each large-sized storage system, smaller ones can be used. For example, in the same closet you can hang a scuba or put a drawer for small items, and in the chest of drawers you can place a smaller organizer or put dividers, which will be discussed below.

Table. Various large storage systems.

Lighter from a cartridge case

You can make a beautiful and original lighter from a cartridge case yourself! There is nothing complicated in the manufacturing process, you just need to have a minimum set of tools, basic skills, etc.

Small storage systems

In addition to large-sized systems, there are also all kinds of small ones that simplify the storage of small-sized items and prevent them from existing in one continuous heap in the house. Often they can be installed inside dresser drawers, on shelves, or be suspended and located anywhere in the apartment. Everything here will depend on the desires of the home owner, as well as on the design and capabilities of the premises.

Let's look at the main types of small storage systems.

1. Pockets – convenient systems storage for areas such as kitchens and bathrooms, as well as toilets. You can also use pockets in closets, but this is usually not practical. They are a soft organizer with many compartments. Usually made of fabric or film.
2. Mesh baskets- usually used as extra space for storing small items. Convenient to place in a closet or under the bed.
3. Vacuum bags– the optimal solution for storing oversized winter clothing such as down jackets, as well as for transporting a large amount of clothing. They help reduce the space occupied by things in the closet due to the fact that excess air can be removed from the bags using a regular vacuum cleaner. Thanks to this, the volume of clothing is reduced to a large extent. The only negative is that clothes get very wrinkled in such bags.
   
   
4. Hanging shelves, racks, scubs. This is what you can buy at Ikea or other similar stores. They are usually hung on rods in closets and things are stored in them. Several sections are created at once. As a rule, such shelves have a fairly soft frame and, if desired, they can be folded and removed if there is no need to use them.

Advice! Depending on what you plan to store, you need to choose a storage system. Thus, small wardrobe items can be placed in small textile drawers; plastic organizers are ideal for storing kitchen utensils. You can also store something in cardboard boxes etc. Plastic and fabric products are perfect for storing children's toys.

And now about delimiters

Drawer dividers are special strips that are used to optimize free space in any drawer, regardless of its size and dimensions. It’s enough just to take separators that suit the parameters. Usually they are made in the form of strips that are assembled inside the box into a spacer and allow you to create several compartments in it to place things in them.

On a note! Drawer dividers can be replaced with organizers that are simply installed inside. They have several compartments.

Dividers are especially relevant for storing small kitchen utensils; they are also convenient to use for cosmetics, tools, medicines and other small things. If you simply put all the small items into a drawer without using an organizer, they will in any case get mixed up with each other, and you will have to look for the desired item for a long time. If there are dividers, getting out any item will not be difficult, because it will lie in its strictly designated place.

If we're talking about When storing kitchen items, such as forks, spoons, knives, it is best to use plastic or wooden dividers. They will not be as susceptible to moisture as cardboard or fabric-lined ones, although dividers can be made from various materials. But for storing small items of clothing, cosmetics and other things, you can also use cardboard dividers, covered with fabric or covered with paper. There can no longer be any contact with water, and therefore there is no need to worry about something going bad.

On a note! Instead of dividers for kitchen utensils, you can use small trays specially designed for installation in drawers. It will prevent moisture from getting onto the wooden bottom of the box. However, if you want to use dividers, then it is recommended to glue oilcloth to the bottom. It will protect its surface from contact with water.

You can also use dividers in the bathroom if there is some kind of chest of drawers or cabinet with drawers. And here it’s also worth assessing which ones are better to use – plastic, wood or cardboard. It will all depend on what needs to be stored. So, rags and sponges are stored well only in plastic containers, with plastic dividers. But some dry personal hygiene items can also be placed in boxes with wooden or cardboard dividers.

Important! Bathroom and toilet - places with high humidity. It is better not to use susceptible negative impact water storage system. Otherwise they won't last long.

What can it be made from?

Dividers can be bought at the store, but, unfortunately, they do not always have suitable sizes. So the easiest way is to make them yourself according to the parameter the desired box. So, you can make separators from:

• cardboard;
• plastic;
• metal;
• tree.

In addition, materials such as fabric, paint, oilcloth, paper, etc. can be used. They are necessary for decorating the surface of the dividers if necessary.

The easiest way is to make cardboard dividers, but they cannot be used in the kitchen. But in the room they will fit just right. For the kitchen, you will have to make these storage systems from wood, and even cover it with a protective varnish. You can also try making them out of plastic.

As auxiliary tools may be required:

• scissors;
• scotch;
• glue;
• wood hacksaw;
• brushes;
• Ruler and pencil.

Let's look at a couple of examples of creating dividers with your own hands. We will use wood and cardboard.

Option #1. Making dividers from cardboard

Step 1. The first step is to decide on the size of the dividers. To do this, you need to know the length, height and width of the box and, in accordance with these parameters, determine the dimensions of the storage systems themselves. Next, you need to draw blanks for the dividers on a sheet of cardboard. Their length will be equal to the width or length of the box, and their height will be the height of the box or slightly lower. It is important at this stage to understand what size the sections should end up being.

Step 3. Now you need to cut the film for pasting the dividers. You can take a self-adhesive option. One piece of film for one separator should be of such a size that it is possible to completely wrap the part with it.

Step 4. You need to cover all the parts with film very carefully, avoiding the appearance of air bubbles on the surface. You can remove them by ironing the parts with a card. The parts need to be covered on all sides, even the sides.

Step 5. Then you need to make marks on the ends of the workpieces in the places where the cuts will be made so that individual elements can be connected into one system. The width of the cutouts should be the same as the thickness of the cardboard.

Step 6. All that remains is to cut the planks according to the marked marks. It is important not to cut them to the end, otherwise the system will not be assembled.

Step 7 Then you should connect the parts in unified system and install it in the box.

In our new article we have collected best options manufacturing hand cultivator! Schemes, drawings, examples, photos and step by step instructions... All this, as well as many other useful things, can be found!

Video - Cardboard partitions

Video - Making a laundry organizer

Option #2. How to make wooden partitions

Step 1. To begin with, you need to cut individual parts from a thin sheet of plywood according to the dimensions and pattern of the dividers. They should have the same height as the box. There should be a total of 4 walls and 3 partitions.

Step 2. In this case, you need to make grooves in the side parts that will help join the individual parts into a single system. The separators themselves will be inserted into them.

Step 3. Now all elements of the future storage system need to be polished.

Step 4. All side elements of the organizer should be connected to each other. They can be nailed together using small nails.

Step 5. Now it’s worth gluing all the corners with glue and applying it to the places where the dividing strips will be installed.

Step 6. It is necessary to fix the separator strips inside the box. When the glue has dried, the storage system can be varnished.

Step 7 When the varnish layer has dried, you should install the dividers inside the box and you can use them.