Adjustment of double plastic doors. How to independently adjust plastic doors - causes of problems and ways to eliminate them

Plastic windows and doors are installed to create warmth and comfort in the house. One of the disadvantages of PVC structures is the periodic disruption of their functionality. Timely adjustment of plastic doors or windows will correct the situation. To perform this procedure, it is not necessary to contact specialists. It is quite possible to adjust plastic doors with your own hands if you know certain instructions.

When adjustment is necessary

As soon as problems began to appear PVC structures, you must adjust the plastic doors yourself. Reasons for concern may include the following factors:

• If the door, when slightly open, begins to close or open on its own under its own weight;
• The first signs of distortion appear. A violation can be detected in a timely manner in this way: on the reverse side of the rotation of the structure, using a simple pencil, a line is drawn on the plastic door when it is closed along the perimeter of the frame. After that, open it and examine the result. If the mark is parallel to the edges, then there is no need to worry. Otherwise, the PVC doors began to sag.
• The following experiment will help determine the degree of deflection in the clamp. To do this, use a regular notebook sheet. It is clamped with a cloth in different places around the perimeter, and then gradually pulled out. If the sheet is pulled out with the same force, then the clamp is in good condition. Otherwise, it is necessary to adjust the pressure of the plastic doors.

The pressure should be adjusted twice a year: before the winter and summer periods. If the pressure of the leaf against the frame is not loosened, the parts of the plastic door will wear out very quickly.

Prevention and monitoring of PVC structures should be carried out in a timely manner. Otherwise, after some time, critical signs may appear that will be problematic to cope with on your own. Sometimes this can lead to a complete replacement of the structure. These signs include:

• force is applied to open the structure;
• when closing the structure, the canvas touches the box;
• malfunction of fittings, such as handles or hinges;
• does not stay closed when the lock is open;
• lets the cold in even with the doors tightly closed.

Regulation instructions

Diagram of door adjustment vertically and horizontally

Adjustment of plastic doors is done with everyday tools and hex keys. The installation of the main fastenings of a PVC device involves adjusting plastic structures according to several characteristics:

• horizontally – adjusting the distance between the canvas and the loop structure at different levels;
• vertically – the ability to change the height of the canvas in relation to the box;
• frontal – adjusting the degree of pressure of the web to the seal.

When starting work on adjusting the PVC door, it is necessary to free the hinges from decorative panels. Remove only with the doors open using a 3 mm hex key.

Horizontal adjustment

Over time, the plastic structure begins to cling to the box. This happens because door leaf capable of moving in different sides in relation to the loop structure. How to adjust plastic doors so that they close freely? To do this, the long screw located under the special hinge cover must be adjusted. It is located horizontally. How to adjust correctly balcony door, if she starts to cling to the box? It depends on where the defect appears.

• If the door leaf touches the frame in the latch area or along the entire height, then on all hinges this type is turned a couple of turns clockwise.
• If the door leaf touches the frame in the lower corner, then tighten the screws only in the upper and middle hinges.

Vertical tincture

This type of do-it-yourself door adjustment is used if it has already sagged or, conversely, there are signs of the seal being pressed in. The hinges of a plastic door are adjusted using a vertical screw, or rather by turning it in different directions. You need to adjust it using a 5 mm hex wrench, which is used to rotate the screw. Use a 2.5 mm wrench and a flat-head screwdriver to tighten the strikers at the bottom and top of the door frame. But the locking plate is shifted using a Phillips screwdriver.

Front setting

The degree of pressing of the canvas to the box is different in each case. The fittings will tell you how to adjust the pressure on a plastic door. For details on the intricacies of adjusting plastic doors, watch this video:

• If there are three eccentrics at the end of the door leaf, then they are turned using the necessary tool.
• In some cases, the design of the fittings includes a trunnion. She presses down using pliers. To achieve maximum pressure, the trunnion must be installed at a right angle to the door leaf. For minimal pressure, the adjustable element is placed parallel.
• Sometimes, when the blade does not press well, adjustment is carried out by moving the striker. To do this, a special screw is placed under it, which has a hex head.

Adjusting plastic doors that are sagging is sometimes not limited to adjusting the screws. There are times when the screws are adjusted, but the result does not improve. In this case, you should use the glass unit adjustment method. To begin, use a chisel to carefully remove the installed glazing bead. Then install special PVC gaskets between the plastic and the glass unit. Adjusting a plastic door with a double-glazed window helps change the geometry of the door leaf and in this way eliminate distortion.

When removing beads, you need to mark them in order to subsequently install them in their groove. This will simplify the process, since very often manufacturers install different types of glazing beads for the inside and outside of a double-glazed window.

Handle adjustment

Plastic doors have fittings and their adjustment is also important. There are two types of problems that arise with fittings:

• The handle begins to turn poorly or does not close completely. This usually occurs due to deviations in the placement of the plastic sheet. The appropriate settings must be made. If unsuccessful, the lock must be replaced.
• The handle came loose. It is necessary to remove the decorative trim and tighten the screws using a screwdriver.

Adjustment of PVC entrance doors

IN Lately installation of inputs has become widespread PVC doors. This is due to the fact that they have sufficient strength, do not corrode and are resistant to moisture. But, to ensure proper functioning, the plastic entrance door is adjusted at the installation stage. Problems with entrance doors:

• friction;
• creaking hinges;
• poorly pressed door leaf, which can lead to cold air entering the room.

For information on adjusting PVC doors, watch this video:

All the adjustment methods discussed above will tell you how to adjust a plastic front door. But differences still exist. On entrance doors the hinges are different, and tilt and turn mechanism absent. There are three ways to configure loops:

• The height of the door leaf relative to the frame can be adjusted by tightening the hinges from below;
• a poorly pressed mechanism can be corrected by adjusting the upper hinges;
• movement of the door leaf horizontally - from the side.

Adjustment of plastic entrance doors in which creaking has occurred involves lubricating the hinges. The lubricant is selected that can withstand temperature changes well. To lubricate, you need to remove the top cap on the hinges and place the selected product into the hole. To learn what you need to do to get rid of door squeaks, watch this video:

As we see special problems in the matter of how to adjust a plastic door, no. But if more serious problems arise, you should contact a specialist.

In each modern apartment Plastic doors to the balcony have been installed. They are distinguished by many advantages: ease of use, low maintenance and speed of installation. Possible problem, which occurs after long-term operation of the mechanism - misalignment and loose fit of the sash. Therefore, it is useful to know how to adjust a plastic balcony door to eliminate loosening due to regular opening, closing and ventilation.

Before you begin diagnosing the problems that have arisen and subsequent repairs, it is worth understanding the structure. There is a base unit, as well as spare parts for a plastic balcony door. Moreover, among the accessories there are both irreplaceable and optional parts. As a rule, in door block includes the following elements:

• frame made of PVC profiles, which are connected by special fasteners;
• a leaf assembled according to a principle similar to a door frame;
• hinges, thanks to which the structure closes and opens;
• handle and latch for PVC balcony doors;
• a seal that ensures the sash is tightly closed;
• double-glazed balcony door.

In addition, the device may include additional elements, expanding the functionality of the balcony door: stoppers, mechanical or hydraulic sensors and other parts.

The design of the handle may also differ: it can be stationary or movable, one-sided or two-sided; shell handles for balcony doors are popular. The latter option is in demand in families with children, as well as smoking people, because the shell handle allows you to conveniently close the door while on the balcony. For an apartment on the ground floor, a good idea is a handle with a lock - a balcony latch for plastic doors, which allows you to secure the balcony from intruders.

When adjustment of a plastic balcony door is required

The price of a plastic balcony door is quite high, but the purchase is expensive quality model does not save from frequent cases of mechanism breakdowns. It's all about its frequent use, which leads to a decrease in the tightness of the sash.

In addition, double glazing provides excellent sound insulation, and PVC guarantees durability. However, it is these materials that noticeably make the structure heavier, as a result of which it begins to sag under own weight and stops closing tightly. As a result, a noticeable draft appears in the room, and insulating the balcony does not help.

The normal position of the plastic door is as follows:

• if the door is open, it does not move on its own;
• no sash displacement;
• the leaf is pressed tightly against the door frame profile.

If this is the case, intervention in the door mechanism is not required. However, if you notice the slightest deviation, you immediately need repairs to your plastic balcony doors. You shouldn’t delay calling a technician, because with each opening and closing the situation will get worse. As a result, this can lead to balcony doors not closing at all.

Helpful advice! If the door installation warranty has expired and you do not want to contact a specialist, you can watch the video self-adjustment plastic balcony doors and fix the problem yourself.

Types of balcony door faults

If you adjust a plastic balcony door with your own hands, for the success of the repair it is important to determine the causes of the malfunction. Most often the problems are as follows:

To test the door for tight closure, slam the shutter with a regular album sheet paper Try to push the sheet around the perimeter of the door. If it moves easily, the structure has lost its density and needs adjustment.

Also evaluate the tightness of the seal: uneven pressure on the rubber usually indicates sagging. Determining the direction of displacement is simple: pay attention to the place where the seal is compressed and check whether there is a mark from the sash on it.

How to determine if a door leaf is skewed

If you suspect the structure is skewed, close the sash and then move around the perimeter closed door with a simple pencil. Open the door and compare its outline with the drawn line. The presence of unevenness indicates that the door is warped. For accurate results, use a building level.

Let's say, as a result of measurements, you find out that the width of the drawn strip is 8 mm (an error of 1 mm is permissible). This means everything is in order and the door is not warped. If the width of one strip is 12 mm and the other is 4 mm, this clearly indicates that the door is skewed by 4 mm.

Note! Sometimes it turns out that on the hinge side the width of the strip is 3-4 mm, and on the handle side 6-7 mm. Such indicators indicate that the door is narrowed by 4-6 mm - this is a manufacturing defect, and there is no point in moving such a door.

Also check the width of the opening on all sides of the frame. The difference in measurements should not be more than 1 mm. Otherwise, the opening will have the shape of a barrel - this happens when installed incorrectly, when the middle of the frame is pulled towards the wall more than the top and bottom. Such errors also lead to loose clamping. By measuring the width of the sash on all sides, you will determine the correct length of the impost. The difference between the three measurements should not be more than 0.5-1 mm. If the indicators differ from the norm, the length of the impost differs from the required one and causes the door to skew.

How to adjust a plastic balcony door: step-by-step instructions

To avoid mistakes or accidental damage to the glass unit of a balcony door (the cost of which is quite high), you need to figure out how to adjust plastic balcony doors correctly. When carrying out work, it is not necessary to overpay for a specialist: you can adjust the balcony door yourself - video instructions can be easily found on the Internet.

To work you will need very few tools:

• hexagon;
• crosshead screwdriver;
• flat screwdriver.

Instructions and video: how to adjust plastic balcony doors when sagging

If you notice that when opening and closing the door it scratches the bottom edge of the frame, this indicates sagging of the door. The adjustment in this case can be vertical or horizontal.

Horizontal adjustment steps:

1. Open the door wide to the swing position.
2. There is a screw located near the top hinge at the end of the sash. Take the hex key and turn it clockwise 2-3 times.
3. Remove the plugs covering the holes leading to the top screws.
4. Turn all screws under the plugs clockwise.
5. After adjusting the mechanism, check whether the door now closes freely. If necessary, tighten the screws again.

To understand how to adjust balcony doors vertically, do the following:

1. Lift the door evenly and find the screw at the bottom end of the hinge, located along its axis.
2. If the screw is covered by a plug, carefully remove it.
3. If you twist the screw clockwise, carefully lift the door, if counterclockwise, lower it.

Adjusting the pressure of balcony doors and door handles

To tighten the handle for a plastic balcony door, you need to do the following:

1. Slowly and carefully turn the plastic cap at a right angle.
2. Under the plastic cover, find the screws for fastening. Pull them up.

If the handle does not turn well, sometimes it is enough to lubricate the lock special material, which does not contain resin or acid. In the event of a complete breakdown, you should buy a handle for plastic balcony doors, unscrew the screws, remove the old part and put a new one in its place.

Helpful advice! A good option is to install a magnetic latch on the balcony door. This will help avoid too frequent exposure to door handle every time the door is closed and opened, which will have a beneficial effect on its durability.

If there is blowing from plastic balcony doors, this is a sure sign that the sash is not pressed tightly. It is necessary to adjust the pressure of the plastic balcony door. To figure out how to adjust plastic balcony doors for pressure, look for locking elements on the door leaf. They are responsible for the pressure density.

Using a wrench or pliers, rotate the locking elements until the door is in the desired position. Professionals recommend periodically self-adjusting plastic balcony doors depending on the season. Just figure out how to adjust plastic balcony doors for the winter, and you can easily loosen the pressure in hot weather and tighten it in the cold season.

Sometimes adjusting the hinges does not help solve the problem, and then the leakage of the clamp can be eliminated using a pin. For this you will need. To achieve maximum door pressure, install the trunnion perpendicular to the profile. To, on the contrary, achieve minimal pressure, position the trunnion parallel.

Replacing the seal and adjusting the door when the frame is scratched

It may turn out that adjusting the door pressure did not bring the desired result. This happens because the rubber seal has worn out, and any adjustments to the door are pointless without replacing it. To do this you need:

1. Pull out the old tires. This can be done without much effort and you won’t need any additional tools.
2. Remove dirt from the inside of the groove.
3. Place a new seal. Make sure that the side bend is at the end of the sash.

Helpful advice! To make work easier, remove the sash from the frame: this will allow access to the rubber gaskets from the hinge side. It is better to choose a seal from the same manufacturer as the installed doors.

If the balcony doors do not close well and touch the frame, scratching its center, follow these instructions for self-adjusting plastic balcony doors:

1. Lower the sash to the bottom hinge.
2. Insert the adjusting key into the side screw and tighten the sash.
3. If the door position does not return to normal, repeat the procedure with the top hinge.

The main and perhaps the only problem that a plastic door may force you to face is adjusting the hinges. As a rule, high-quality modern plastic structures When used correctly, they do not require any more hassle. But adjustment also causes difficulties for many people.

When installing a new plastic door, installers must immediately adjust it to the location, and for some time its operation does not cause any complaints. But under the influence of its own weight, the structure may sag and stop closing well.

How to adjust the products in this case or if other malfunctions occur? How to prevent some problems from occurring? Finally, how do you know when adjustments are needed? We will try to answer these questions.

First of all, I would like to advise purchasing products only from well-established companies and not skimping on quality. During installation, it is advisable to monitor the installation process to ensure that the initial adjustment of the plastic door has been carried out.

What to pay attention to when accepting work

Good performance of products and their durability depend both on the quality of the materials and fittings from which it is made, and on correct installation and adjustments.

When accepting work from installers, pay attention to the following points:

Before the installers arrive, watch the video - adjusting plastic doors - to have an idea of ​​what they are required to do.

How to understand when it's time to adjust the door

Tight closing and strong drafts (see) are already obvious problems, which are impossible not to notice and are more difficult to eliminate than if problems are detected more early stage. Exist simple ways, allowing timely attention to the need for adjustment.

To determine if the pressure on the box is loose, take a piece of paper and press it between the box and the frame, closing the door tightly. Then pull the paper towards you and pull it out, noting the force with which you did it. Do this around the entire perimeter.

If the sheet is pulled out with the same force in any area, everything is in order. If somewhere this happens too easily, it means that the seal in that place is insufficient.

If the door begins to sag, you can find out about this by tracing the closed door around the perimeter with a simple pencil. The drawn lines should run parallel to the corresponding edges of the box. If they deviate from parallel, it's time to decide how to adjust.

Adjustment instructions

Once you have discovered that the door needs adjustment, try not to put it off for too long, otherwise it may require expensive repairs (see). A dented seal, a displaced sash, a tight turning of the handle - these are clear signals that it’s time to take action.

Below are instructions on how to adjust plastic doors.

Horizontal adjustment

Most often, it is necessary to eliminate sagging that occurs due to the door’s own weight:

Vertical adjustment

Sometimes you need to raise or lower the entire door evenly. To understand how to adjust a plastic door vertically with your own hands, you need to find an adjusting screw at the bottom end of the hinge, directed along the axis of the hinge.

For reference. On plastic entrance doors, the adjusting screw may be closed with a plug that needs to be removed. When setting up a balcony door with your own hands, you need to do the same.

To adjust, you need a five-millimeter hexagon. Rotating it clockwise will raise the door, counterclockwise will lower it.

Pressure adjustment

It should be changed regularly as the season changes - weaken for the summer and strengthen for the winter. This is done very simply, using the same tool - a hexagon.

So:

As you can see, there is nothing complicated in such a matter as adjusting plastic doors - the video on our website will help you understand this in more detail.

If you have more serious problems than those described here, call a specialist to your home - he will fix everything quickly and efficiently. You must call a specialist during the entire period of warranty service.

Sections of the article:

Adjusting plastic doors is a process that is designed to eliminate all sorts of problems that have arisen during the use of the structure. No matter how expensive the door and its components are, items always break, especially those that are used frequently.

Doors most often require adjustments because the hinges can weaken and become loose. As a result, the door is uneven, and a draft blows from the opened cracks. The root cause of failure is the wear of individual parts, but their quality also plays a significant role. That’s why you shouldn’t skimp on quality, so that you don’t have to think about adjusting the plastic door in the future.

If you have problems with a plastic door, but don’t want to contact a professional, you can fix the problem yourself. But for this you need to prepare and find out the answers to the following questions:

• Where in the door are the parts intended for adjustment located?
• What problems can generally arise with plastic doors and how to solve them;
• How exactly is a plastic door adjusted?

What is responsible for regulation?

To adjust the door, you will need a hexagon with a diameter of 4 millimeters (most often), sometimes pliers will be useful.

The first adjustment unit can be found on the bottom door hinge By turning it with a hexagon, you can raise or lower the door, depending on the direction of twist.

Here you can also find a node that moves the bottom of the door to the right or left. Sometimes the adjusting screws are covered with protective caps that are easy to find and remove. To move the top of the door to the left or right, you need to twist the screw located at the top hinge.

The clamping force of the door against the door frame is controlled by eccentrics, which can be found throughout the door body. By twisting them, you can achieve precise adjustment of plastic doors and their tightness by changing the pressure in individual areas. In doors with a tilt-and-turn operating principle, there is a way to adjust the pressure of the entire upper part. To do this, you need to turn the screw located at the top of the door.

Getting to this screw is quite difficult; you need to put the door in both the ventilation mode and the “wide open” mode. A built-in mechanism that can be bypassed protects against such opening. You just need to open the door, align the plate that is located at the end of the door near the handle (parallel to the rubber seal) and turn the door handle to ventilation mode. This is a rather complicated procedure, so to know exactly how to adjust a plastic door in this mode, we recommend watching the video.

Adjustment methods for various problems

To correct deficiencies, you need to know which screw is responsible for what, and for what problems to turn it.

This is due to the complexity of the door design and the abundance of all kinds of screws, the incorrect twisting of which can lead to complete breakdown of the mechanism.

On request, adjusting plastic doors, you can find many videos from professional craftsmen, which will help in your work.

Sagging

Over time, the input protection sags under its own weight, and due to the fact that it is mounted in the air. This is one of the most common problems and at the same time unpleasant, since in this case the lower profile rubs against the frame, and when difficult cases the door becomes difficult to close. In this case, we will definitely have to worry about adjusting the plastic door before the situation gets worse.

To fix this problem, you need to lift the door up. This can be done using a special hole in the middle of the bottom loop. By inserting and turning the hexagon clockwise, we will raise the door higher. If you need to lower the door, you will have to turn it counterclockwise.

In the case where the frame only touches the part of the door opposite the hinges, horizontal adjustment of the top hinge will help. By inserting the tool into the hole and turning it clockwise, we will pull the upper section of the door closer to the frame.

Adjusting plastic doors against sagging can be done independently, but to know the purpose of all screws and connectors, you need instructions from the manufacturer.

Friction on the box

If, when closing and opening, the door rubs against the frame, you need to know how to adjust the mechanism by moving the plastic doors to the left or right. First, we move the lower part by turning the hex key in the connector in the lower hinge, and then do the same trick with the upper one.

Poor pressure

If a draft is blowing from your door, then most likely the pressure of the door to the frame has weakened. This can be corrected by adjusting the plastic door, namely the eccentrics. The mechanism of their operation is that when closing, the eccentric climbs behind the pressure plate.

It follows from this that to increase the pressure it is necessary to turn each of the connectors exactly the same way. You should not assume that the stronger the twist, the more reliable the clamp; with extreme pressure, the seal may dry out and stop doing its job. Experts recommend loosening the pressure in summer time to give the sealing rubber a little freedom and provide a slight additional ventilation in the house.

Difficult closing

Another common problem with plastic doors is that you need to apply force to close them. Most often, force is required when turning the handle.

Such symptoms indicate that the eccentrics are in winter mode, and to make closing easier, the screws need to be loosened.

Before adjusting plastic doors, you need to watch a training video to know the required tightening level.

Another reason for difficult closing may be a clogged door mechanism. In mild cases, you can get by with complete lubrication, in difficult situations you will have to disassemble the door and clean the system.

If the door is used for a long time, the handle may become loose. To correct this problem, rotate the top plate of the handle base and tighten the bolts underneath it.

Adjusting doors with GreenteQ hinge

If the door is heavy (more than 40 kg) and is often used, in most cases it is equipped with GreenteQ type hinges. Adjusting plastic doors, especially on your own, can be a problem, so before starting work it is recommended to watch a video of the process. They can be adjusted in three planes:

• Vertical;
• Horizontal;
• Press to the box.

To access the hinges, you need to remove the plastic protection from them, which is quite easy to do. To raise or lower such a door, insert the hexagon into the socket located at the bottom of the hinge and adjust by twisting to one side. Remember that the adjustment of plastic doors begins with the bottom hinge, and then the middle and top ones are adjusted to it, which can be done independently.

To move the doors left or right, screw in or out the screw located in each hinge under the decorative mask.

To adjust the level of pressure, insert a hex key from the top end of the loop, and use circular movements to change the position of each of them. Now you know how to properly adjust displaced or weakened plastic doors using your own hands.

So, adjusting PVC doors is a simple process, but it requires care and perseverance when doing it yourself. Now you know how to adjust a plastic door without calling specialists to your home.

If you installed high-quality plastic doors on your balcony and did it correctly, they will serve reliably for many years. The only problem that can be encountered during their operation is a possible imbalance in the operation of the mechanisms. Everything can be fixed by adjusting the fittings; this work can be done with your own hands.

Is it possible to adjust a plastic balcony door yourself?

Over time, any plastic door begins to sag, due to which its tight fit is not ensured, and the heat and sound insulation characteristics deteriorate. This is due to the fact that the canvas is heavy and is often used. Usually, adjusting the door position horizontally, vertically and pressing it can be done independently.

Even the highest quality balcony door requires adjustment of the fittings over time

To ensure that the service life without adjusting the structure is as long as possible, it is recommended to monitor the installation process, paying attention to the following indicators:

• tight fit of the leaf to the door frame along its entire perimeter;
• no vertical or horizontal displacement of the structure;
• independent opening and closing of the door - it should be absent;
• the need to apply effort during operation - the blade should move easily.

Do not wait until the balcony door stops closing or opening. When the first problems are detected, you must immediately make the necessary adjustments to prevent more serious damage to the blade, box or locking mechanisms.

To determine the place where the displacement occurred, you can use a sheet of paper: it is placed on the frame and the canvas is covered, after which it begins to move. It will be difficult to do this in a skewed area. The tightness of the door is determined using a regular pencil or marker. A line is drawn along the sash, after which the doors are closed. If after opening the line is shifted, it means that there is insufficient clearance in this place and adjustments must be made.

Necessary tool

To adjust the plastic door you will need the following set of tools:

What problems can you fix yourself?

Any House master can eliminate the following malfunctions of a metal-plastic door with his own hands:

• sagging of the canvas - this will be indicated by its touching the threshold; such a malfunction is associated with the large weight of the door, causing it to shift in the vertical direction;
• gap between door frame and the canvas, which indicates a violation of the quality of the door leaf pressure;
• touching the side of the door frame, this occurs due to the movement of the leaf in the horizontal direction, which is caused by operating conditions or weather conditions;
• malfunction of the handle, its fastening becomes loose, causing the mechanism to stop working correctly;
• tight closing of the door - this is caused by diagonal displacement, malfunction of the locking mechanism or strong pressing of the door to the frame.

The plastic balcony door does not close well

If the plastic balcony door begins to close poorly, the reason may be that the handle is not working properly. During operation of the door, this part constantly rotates, which leads to weakening of its fastening and deterioration of performance. In order to restore functionality, you must perform the following steps:

If such an adjustment does not bring the expected result, then most likely the housing is damaged, so the handle needs to be replaced.

The plastic balcony door sank

If you find that when closing the balcony door it touches the threshold, this means that the canvas has sagged and needs to be adjusted. This is easy to do, just follow these steps:

How to adjust the pressure density of a balcony door

A violation of the pressure of the door leaf to the frame can be detected by inspecting the seal; the problem is indicated by deformation of the material.

The adjustment can be made in several ways, everything will depend on the design of the fittings used:

Adjusting balcony door hinges

Using the hinges on which the plastic balcony door is attached, you can adjust the door leaf both horizontally and vertically.

Horizontal adjustment is performed in the following sequence:

Vertical adjustment of the hinges allows you to move the door leaf down or up.

One way to troubleshoot problems is to adjust the glass unit. This option is used when other methods failed to achieve the expected result. It is more complex, but even in this case you can cope without the help of specialists:

Video: adjusting a plastic balcony door

Repair of a plastic balcony door

Before you begin repairing your balcony door, you need to determine the type of fault. There are a number of problems that are quite difficult to solve on your own, so you will have to call a specialist. Serious damage to a plastic door includes:

• cracks in the glass unit, frame;
• violation of welds;
• destruction of fittings;
• tearing out the loop.

Other renovation work You can do it yourself.

How to properly dismantle

If it becomes necessary to dismantle the plastic door, you need to prepare a screwdriver and pliers. The sequence of work is as follows:

Removing a glass unit

If you need to remove a double-glazed window, it is more convenient to do this after you have dismantled the panel. But another option is also possible, when the door remains in place. To do this, you will need a special spatula, but if you don’t have one, you can use a spatula or knife, or rubber suction cups. It is recommended to carry out the work with gloves.

Sequence of work:

Replacing a balcony door

If it is necessary to replace the balcony door, then all work after dismantling will be performed in the reverse order:

Insulation of a balcony door

If you purchased a high-quality plastic balcony door and installed it correctly, then it does not need additional insulation. When choosing a design, it is recommended to give preference to triple-glazed windows. In addition, pay attention to the profile from which the door is made. The five-chamber option is optimal.

A question such as insulating plastic doors is related to the elimination of secondary causes of cold entering the apartment:

• poor seal between doorway and a box;
• lack of insulation of slopes and thresholds;
• violation of the position of the door leaf.

First you need to determine the reason for the penetration of cold air. To check the condition of the slopes, you can use a candle, which will indicate the problem area. In the same way, the threshold and door leaf are checked along its entire perimeter.

Before insulating the slopes, you need to check the quality of the sealing of the seam between the door frame and the opening. If it is bad, then part of the foam is cut out, after which the gap is again filled with similar material.

To insulate slopes, you can use plastic, plasterboard or foam. If the first two materials are used, then the sheathing is made first. It can be made of metal profiles or wooden blocks. After this a layer is laid mineral wool and cover everything with plastic or plasterboard. Additionally, finishing with putty may be required.

To finish the slopes, plastic, plasterboard or foam can be used, but two latest options I still have to putty and paint

You can also insulate it with polystyrene foam. To do this, cut out pieces required size and using special glue they are mounted on the slopes. The foam will also have to be puttied and painted.

A well-installed and properly insulated balcony door will help raise the room temperature by several degrees.

You can insulate the threshold with polystyrene foam, which is mounted using dowels and then finished ceramic tiles. You can also use special plastic products, which are sold together with the door, but often home craftsmen install a regular window sill.

To insulate the threshold, sheets of expanded polystyrene are used, which are then covered with tiles or plastic overlays

Video: disassembling and assembling a plastic balcony door

Adjusting a plastic balcony door is not a difficult task, so you can handle it on your own. To do everything correctly, you first need to determine the cause of the violation of the normal functioning of the structure, and then study the sequence and technology for eliminating it. It is enough to spend a little time once to figure out how to do everything correctly, and then you will be able to make the adjustment yourself.