Homemade equipment for a walk-behind tractor with your own hands. Homemade accessories for walk-behind tractor, description, video, photo

With the purchase of a walk-behind tractor, the user has a desire to use it in all household work for the garden, garden, etc. Some people strive to immediately purchase the maximum possible set of attachments for the walk-behind tractor, others buy only the minimum number, gradually purchasing the rest. The third category of owners undertakes the independent manufacture of devices and additional devices with their own hands. Sometimes they surpass in many respects what the industry can offer.

Buy a hitch and a trailed one for a walk-behind tractor in online stores

What do walk-behind tractors come with?

The walk-behind tractor itself represents only power unit with wheels. So that he can perform useful work, it needs to be turned into an agricultural machine, supplemented with attachments. Only then do they begin to appear positive aspects this energy-rich device.

A small list of basic attachments and attachments:

1. The lugs will allow the walk-behind tractor to move across the arable land.
2. Plow and cutter. Since ancient times, deep cultivation of the land with the rotation of the layer was carried out by plows. A soil mill is a device capable of loosening the fertile layer.
3. A potato planter will make the work of villagers and summer residents easier when planting potatoes.
4. A flat cutter is one of the ancient tools that is experiencing a rebirth with the emergence of the ideas of organic (ecological) farming.
5. Hillers. An increase in the yield of root crops, as well as an increase in the efficiency of the plant root system, is achieved by using hillers.
6. The trailer turns the walk-behind tractor into a vehicle that can transport cargo on the site and on roads public use.
7. The snow blower extends the period of use of the walk-behind tractor; in winter it is actively used for clearing snow.

This is far from full list attachments for walk-behind tractor.

It is not necessary to purchase the entire set of attachments for the walk-behind tractor at once. Additional tools are purchased or manufactured as needed.

DIY lugs

The engine torque is transmitted through the transmission to the wheels. To move across arable land, you need to create sufficient force. You can increase traction by increasing the coefficient of adhesion of the wheel to the ground. Therefore, the lug increases this coefficient several times, making it possible not to increase the mass of the power unit.

To make this attachments, you need to purchase:

• sheet steel 2-3 mm thick, steel of ordinary quality st3 is sufficient;
• isosceles angle 35-50 mm;
• pipe with internal diameter more than 25 mm.

This set of blanks is sufficient to get started. All that remains is to choose a design or develop your own.

The lug can be leading and overhead. The driving lugs are installed in place of the base wheels of the walk-behind tractor. The overlays are put on top of the base wheel. Leaders do it more often.

DIY plow and cutter

The plow, for all its apparent simplicity, is quite difficult to manufacture. Usually, production begins with a hitch - special attachments. The body is fixed to the hitch - this is the main working body. cuts the soil layer. Next, a layer is formed, and then its turnover occurs.

The design of the plow body includes several components:

• ploughshare – cuts into the soil;
• dump - serves to create a given movement of the formation and turnover;
• field board – stabilizes the direction of travel of the entire agricultural unit.

For a walk-behind tractor, the design of the rotary plow is interesting; with one move of the lock, the plow can easily be changed from right to left and vice versa. This is very convenient for cultivating land in small areas.

If the plow can be conditionally considered a passive working attachment, then the soil tiller is active. When cultivating the soil, the wheels are removed, and the unit moves due to the rotation of the cutters. The working blades perform a rotational movement and loosen the ground.

• The lister (fertilizer) hiller is structurally similar to the body of a plow with two moldboards; it moves between the rows, moving soil from the groove to the ridge. They are used with relatively small row spacing;
• disk hiller in the form of two disks covering the ridge. When they move, a ridge is created on both sides at once;
• rotary (propeller), having active plates that throw soil into the ridge.

Lister hillers are often equipped with adjustable blades. This allows you to change the grip width of the working element. Many people use propeller attachments for hilling potatoes, but by cutting the rhizomes of perennial weeds, they contribute to clogging of the field.

Disc hillers are the most common; they are easy to manipulate during operation. They are also easy to make with your own hands.

Do-it-yourself walk-behind tractor trailer

The trailer expands the capabilities of the walk-behind tractor. With it, it turns into a vehicle capable of delivering various cargoes. The parameters of this homemade attachment for a walk-behind tractor depend on the available power. The higher it is, the more complex the cart can become.

For energy-rich walk-behind tractors with engines over 10 hp. Two-axle trailers are possible, which can transport up to 1000 kg of cargo. Usually they build small ones, the load capacity of which is 300-500 kg.

There is an important requirement. The reliability and controllability of the tow hitch must correspond to the characteristics required for vehicles operated on public roads. Therefore, axles or axles from other wheeled vehicles are most often used. Many focus on the use of ready-made bridges from passenger cars and cargo scooters.

Scooter wheels are designed for a load of more than 150 kg each. Therefore, they are taken as a basis for design. Some do-it-yourselfers equip the trailer with a spare tire to make a quick change on the road.

The main thing is to create a strong frame, as it will absorb the load from the transported materials. At the same time from durable frame The safety of all road users also depends when operating a walk-behind tractor with a trailer on roads where there are other vehicles.

DIY snow blower

When purchasing a walk-behind tractor, most users expect to use it only in the spring and summer. In fact, when using an energy-rich unit in winter as a snow blower, you can significantly increase the efficiency of its use in your personal household. There are times when snow has to be removed from paths and areas almost every day.

Several types are used for snow removal:

• auger with rotary discarder;
• bulldozer type with blade;
• a shovel blade is a simplified type of snow blower;
• rotor-fan.

For most users, having a plow blade is enough; this snow blower is much easier to make.

The user, depending on his conditions, determines the type of snow blower he needs. Many people take on the production of a complex auger, believing that this particular device will help in winter period. In fact, most are convinced that it is easier to simply move the snow, freeing up the roadway and territory.

Today's peasants cannot imagine their activities without special equipment. Most people assemble attachments for a walk-behind tractor with their own hands, since this machine goes on sale with a minimal set of additional tools for cultivating the land.

For summer residents and residents rural areas, where it is necessary to cultivate fairly large areas of land, this technique is a real savior, allowing you to complete the intended work quickly, efficiently and without heavy physical effort. Only the walk-behind tractor itself is valuable as a tractor; to perform various earthworks, you need to purchase or make your own attachments.

Additional tools for this machine cost a lot, so purchasing them is beneficial only for large farmers and those who carry out land work to order. But in order to cultivate fairly small areas of land or in order to save money, you can create all these tools with my own hands. Experts often advise purchasing a hitch in a store, since it plays a rather important role in the work and is of a universal type. It is simply necessary for walk-behind tractors; it can be used to attach attachments, such as a plow, trailer, potato planter, hiller and much more that a farmer will need in his work. Unfortunately, this coupling unit is not included with the equipment, so it will have to be purchased separately. But many craftsmen, if their search for a hitch is unsuccessful, make it themselves.

How to make a coupling assembly?

This item must be made from durable material, since it is the link between the tool for work and the traction force of the walk-behind tractor. This assembly must have strong fastening elements on both sides.

To make it you will need the following tools and materials:

1. Metal or channel. They will be needed to create the main body of the unit.
2. Fastening elements in the form of bolts, nuts and steel rods.
3. In order for the position of the unit to be changed, you need to think about what adjustment element is needed. It should be a durable and metal lever.
4. To assemble this part of the walk-behind tractor, you will need a welding machine, a set of keys, drill bits and a metal drill.

Such home-made devices must correspond to the dimensions and load-carrying capacity of the machine. The unit must have sufficiently strong fastening parts and be suitable in size for the main equipment.

Of course, you need to make a universal hitch, since it will be possible to attach to it, like homemade devices, and purchased.

The universal unit is assembled in the following sequence:

1. First, you need to take 2 U-shaped metal arcs of the same size; channels are perfect for their manufacture. You need to drill holes in each metal plate: 6 pcs in one, and 8 pcs in the other.
2. The body is a more complex part and is assembled using welding machine. It must have clearly measured and drilled holes for the connecting elements, and on one of the brackets it is necessary to think about how to make a movable connection.
3. The most difficult thing in this work is the manufacture of the lever, or rather, the mechanism itself for adjusting the position of the walk-behind tractor. Its main parts are a screw, a bracket and a handle.

To perform this work, it is recommended to use a special machine on which you can turn out all necessary details. When the hitch is assembled and ready for use, it is worth checking the strength of its connection and the fastening of the working device for the walk-behind tractor.

Attachments for walk-behind tractor

In order to cultivate the land and perform a number of agricultural work on a small-sized tractor, you will need the following additional devices:

1. Rake.
2. Plows.
3. Hillers.
4. Potato planters and potato diggers.
5. Harrows.
6. Weeders and mowers.
7. Wood splitters.
8. Sprayers.
9. Rotators.

All these devices will be needed sooner or later, but most often they use rakes, plows, hillers and devices for planting and harvesting potatoes.

How to make a hiller?

The simplest homemade attachment is a hiller. To assemble this device you will need the following tools and materials:

1. 2 disks of the same size made of durable metal. You can make them yourself, or take them from an old seeder.
2. Bolts, nuts, metal axles and washers, plain bearings.
3. T-shaped metal frame.
4. Racks - 2 pcs.
5. To properly adjust the angle of rotation of the disks, you must purchase screw lanyards.

Adapters are placed in the center of the disks; they are used to attach them to the frame. Racks should ideally be mounted on such devices so that the distance between the disks can be adjusted in the future. The remaining parts are assembled by welding and bolts.

Potato digging device

This device is indispensable during the harvest of tuber crops, especially potatoes. It is not so easy to make such homemade products for a walk-behind tractor with your own hands. Before work, you need to create drawings of the attachments and think through every detail.

The frame, as the main body, is made by welding from metal corners or channels. It must be strong enough and stable.

To directly collect tubers you need 1 or 2 metal plates with rounded edges, this is done so that they do not cut the potatoes. You will also need metal rods that are welded to the plate. This entire structure is called a ploughshare - it is a moving part of this device.

An equally important piece of equipment is the editorial unit. To manufacture it, you need to purchase 2 metal cylinders; they are designed to connect 2 bushings that ensure the interaction of the shafts.

Housing for cleaning tubers. It is quite difficult to make for an inexperienced craftsman. To assemble it, you need to purchase roller chains and steel rods; it is with their help that you need to assemble a structure that, in its own way, appearance will resemble a squirrel wheel. This wheel must be firmly secured to 2 special rods so that the drum can rotate.

Right assembled parts will allow you to use this device for many years, and the quality result will please you.

Snow removal device

It is not difficult to complete; to create it you need to prepare 2 metal pipes and brackets. The so-called dump can be made from metal sheet. Rods are attached to its body by welding, and brackets allow you to fix its angle of inclination and location relative to the coupling assembly. This moving part can be taken from self-propelled equipment that has expired.

Potato planter

In order to collect this yourself attachment, you need to prepare the following details:

1. The frame is the main load-bearing element; it can be welded from metal corners and channels.
2. A metal axle must be attached to the frame to which the wheels will be attached.
3. A potato hopper is attached to the bottom of the frame.
4. The chain sprockets must be properly attached to the frame and connected to the adjuster.

Particular attention must be paid to the correctly adjusted position of the stars, since the distribution of tubers in the soil during planting will depend on this. The wheels on this device can be of different diameters, it all depends on the dimensions of the walk-behind tractor itself and the attachments.

Some craftsmen manage to create universal devices for excavation work; for example, by adding or removing any parts, you can create a potato planter from a motor cultivator, and rakes can easily be converted into harrows by changing the main attachments on the frame. If you approach this issue competently and knowledgeably, you can gradually collect all necessary tool for household and agricultural work on a walk-behind tractor.

In order to increase the capabilities of the walk-behind tractor, it is enough to equip it with various attachments. Manufacturers have developed numerous add-ons for all models, the use of which makes work on the ground easier.

On sale you can find plows and seeders, hillers, furrow diggers, and sleds. The choice, of course, is large, but the cost of such equipment is unaffordable for many. But it’s quite possible to do it on our own from cheaper or used materials.

How to make a flat cutter with your own hands?

A practical addition to the walk-behind tractor is a flat cutter. This indispensable assistant, which creates beds, weeds and hills plantings, levels, fills, loosens the soil. The possibilities of this attachment are almost limitless.

If you position the blades of the flat cutter on the left and move them in the same plane with the soil, you can weed or loosen the soil. By lifting the device slightly, the blades turned to the left will mow down tall weeds. If the blades point down, then they can easily create beds.

A flat cutter will again help you form grooves for planting and fill in the seeds. This is the function of the burrower.

You can use the Fokin flat cutter as an attachment for a walk-behind tractor. It has the necessary holes for hanging on the structure. If you need a flat cutter of a different size, then you can make it yourself. Drawings and a small metal blank will help with this.

The metal must be of sufficient thickness and strength so that in the future it can perform the functions of a blade. The sheet is heated with blowtorch and bends according to the diagram. When the flat cutter receives the required form, it is cooled with water. In order to this workpiece became an attachment, you need to make holes for fastenings and sharpen the workpiece with a grinder.

The sheet of metal can be replaced with a piece of pipe, to which pieces of metal like blades are attached. They need to be sharpened.

Dimensions and features of making hedgehogs

A walk-behind tractor with an attachment for growing potatoes will save time and effort when caring for this crop. Weeding hedgehogs are a functional attachment that allows you to quickly and efficiently defeat weeds. During the weeding process, plants are not simply cut off, but uprooted. The soil around the plant is well loosened and hilled. Thanks to this, the plant is not only freed from weeds, but also receives sufficient water and oxygen.

Hedgehogs can be purchased at almost any agricultural store, but at a fairly high price.

Based on diagrams and drawings, you can make them yourself.

Ingredients for hedgehogs:

• 3 metal disks or rings;
• a small piece of pipe with a diameter of 30 mm;
• steel rods for cutting tenons.

Preferably use rings instead of discs, which will facilitate the entire structure. The sizes of rings for making walk-behind hedgehogs are different. The most common are 240x170x100 mm or 300x200x100 mm. The rings are attached to the pipe through jumpers. The connection should be made at an angle of 45 degrees with a distance between elements of no more than 15-18 cm.

Spikes, cut from a steel rod 10-15 cm long, are welded onto the rings and the axle itself. Depending on the size, they are attached to a large ring in the amount of 15 pieces, and to a small ring - 5. Also, several pieces can be welded onto the axle.

To make it easier to work with the structure, the walk-behind tractor with hedgehogs is equipped with additional wheels.

Making a snowblower bucket with your own hands

The walk-behind tractor is useful on the farm not only in summer, but also in winter time. It is often equipped as snow blower. It is enough to make a bucket for the walk-behind tractor, and the iron assistant will do the hard work.

A bucket for clearing snow is usually made from a 200-liter iron barrel. You will also need strips of metal, square pipe, rubber and steel plates and fasteners - bolts, nuts. Tools: pliers or pliers, drills and metal drills, wrenches, grinding machine, welding machine.

Using a grinder, cut out the side parts of the barrel. Then the workpiece is cut into three parts. Two of them are welded along the contour. The remaining third of the barrel must be divided into metal strips that will serve as ladle knives. Three holes with a diameter of 6 mm are drilled into them for fastening along the edge of the bucket. Instead of a barrel, you can use a metal sheet, which will need to be bent by heating.

A strip of metal is welded to the bottom of the bucket to make it heavier. The metal strip is completely covered with rubber to prevent wear. Then the bucket is attached to the walk-behind tractor. To protect against corrosion, a homemade bucket is primed and painted.

You can turn a walk-behind tractor on wheels into a snowmobile using a trailer and winter wheels. Using a channel, the trailer is fixedly fixed to the frame. Instead of expensive wheels, used truck tubes are used. On each wheel, the deflated tube is secured with chains and inflated again. It is quite simple to equip a snowmobile with a homemade sled.

How to design a trencher?

A homemade trencher is a mounted attachment to a walk-behind tractor that allows you to quickly and effortlessly dig trenches and holes. It is a kind of compact excavator that is maneuverable and economical. Moves on wheels or tracks.

The digging attachment allows you to dig trenches and holes even in frozen ground. The walls of the trenches are smooth, without crumbling. The developed soil is light and crumbly and can be used for backfilling.

Two cutters are attached to the front suspension, and a shovel is attached to the rear suspension to remove soil from the trench. On cutting discs and chain transmission must be secured protective covers on safety precautions. Using the same principle, a drill attachment is made from a metal rod and plates.

Manufacturing of other hanging structures

The walk-behind tractor can be equipped with a variety of useful devices- a plow, a rake, all kinds of shovels, mowers, skis, brushes. Desire, clear diagrams and descriptions of work will help you replicate store-bought analogues of hanging elements and even improve them, since they will meet individual requirements and conditions.

So, to cultivate the land you need a plow that can overcome virgin soil, overgrown with grass, wet or stale soil. To make it you will need a steel plate about 5 mm thick. Using rollers, the plate is bent into a cylinder. The edges are sharpened with a grinder.

Received homemade plow hung on the stand of the walk-behind tractor through the hitch.

Using the same principle, it is easy to make an attachment that forms furrows. It’s good if there are cultivator stands. They can be attached to a corner or two racks can be made from scrap materials. To do this, plates are cut from a metal sheet 1.5-2 mm thick. The size of the plates should correspond to the depth and width of the furrow. They are fastened with bolts to the racks of the structure. This nozzle can be used for instillation. You just have to give the plates the required shape. They must be in the form of a disk or circle, located at a certain angle. Such plates are located closer at the top than at the bottom. Due to this, the disks, rotating, open the cavities outward.

The attachment to the walk-behind tractor for collecting cranberries contains a self-propelled platform on caterpillar tracks. An intake is attached to the rotating frame of the platform. It is made in the form of a box with curved parallel teeth. While moving, the device, using the draft from the fan, captures the berries into the box. The fan is powered by the motor. Helical spirals are installed in the box.

Picked cranberries are heavier than garbage, so they fall to the bottom of the container. Leaves and small specks that fall along with the cranberries are removed through the hole along with the air flow from the fan.

A brush for a walk-behind tractor is used to clean the area not only from leaves, but also from shallow snow. Simplicity, efficiency and versatility of use are the obvious advantages of this hanging element. The brush shaft is vertically attached to the walk-behind tractor. A ring and discs with brushes are alternately put on it. The diameter of the rings is 350 mm. The grip width of such a brush is usually made no more than one meter. This way the walk-behind tractor maintains maneuverability and covers a fairly large surface area for cleaning.

The length of the bristles is 40-50 cm, otherwise it will soon begin to wrinkle and break. It is not possible to restore the properties of the bristles, just attach new discs. The speed of movement of a walk-behind tractor with a mounted brush varies in the range of 2-5 km/h, depending on the engine power of the unit.

To learn how to make a plow for a walk-behind tractor with your own hands, see the following video.

Homemade products for walk-behind tractor (52 videos)

Super video selection of the best videos

Enjoy watching!

1. Do-it-yourself potato planter for a walk-behind tractor

Potato planter from Ildar Sunagatullin

How to make a potato planter for a walk-behind tractor (beginning)

How to make a potato planter for walk-behind tractor 2

How to make a potato planter for walk-behind tractor 3

How to make a potato planter for walk-behind tractor 4

How to make a potato planter for walk-behind tractor 5 (dimensions)

Homemade POTATO PLANTER (tests)

Homemade potato planter. I plow and plant potatoes.

2. Homemade cultivators for walk-behind tractor

Homemade hedgehog cultivators for walk-behind tractors

Homemade cultivator for a mini tractor from a walk-behind tractor

Homemade inter-row cultivator for walk-behind tractor

Quick weeding cultivator

3. Homemade flat cutters for walk-behind tractors

Do-it-yourself potato row weeder for a walk-behind tractor. Flat cutter for walk-behind tractor

Flat cutter for walk-behind tractor. Capture 1 meter

2-row weeder cultivator for walk-behind tractor

4. Homemade hiller for walk-behind tractor

DIY disc hiller for walk-behind tractor

Do-it-yourself disk hiller for a walk-behind tractor. Dimensions

Hillers for planting potatoes. Great option!

Disc hillers with cultivator tines for hilling potatoes

Photo review of the creation of a disk hiller for a walk-behind tractor

5. Homemade mowers for walk-behind tractors

Homemade rotary mower for a walk-behind tractor paired with an adapter
The knives are located 1 cm higher one in relation to the other. The rotors are made of metal 3 millimeters. An additional paper air filter, half of a passenger car, is mounted in the air intake.

DO-IT-OUR-HANDS MOTOR-BLOCK MOWER (Neva MB 3 walk-behind tractor)
In this video, I will show how a rotary mower on a walk-behind tractor made from scrap metal works. Working width homemade mower is 45 cm, cutting height 3.5 cm. The rotary mower is made for the Neva MB 3 walk-behind tractor, it mows grass well at any height, both low and high.

6. Homemade lugs for walk-behind tractors

How to make lugs for a walk-behind tractor. Manufacturing process.

Mini-video about making it yourself homemade lugs to the walk-behind tractor.

7. Homemade potato digger for walk-behind tractor

The potato digger is designed for digging up root crops in a country house or personal plot. By aggregating your walk-behind tractor with a vibrating potato digger, you will greatly facilitate the process of digging up potatoes, which previously took a day of your time and will turn into an hour. In this model of potato digger, the manufacturer took into account all the shortcomings of previously released copies. In accordance with the requests of customers who previously purchased this model, changes were made to the design of the digger. Today the Poltava vibrating potato digger is the most popular model in its class, as evidenced by search queries in Yandex and Google. Manufacturer's price and delivery to any region of Ukraine will be a pleasant end to the purchase of a digger.

Characteristics of a potato digger for a walk-behind tractor:

Working width: up to 390 mm
- processing depth: up to 180 mm
- drive: belt
- soil separator: adjustable by engine speed
- dimensions, LxWxH: 900x670x570 mm
- weight: 34 kg

The simplest homemade potato digger for a fan-type walk-behind tractor. In this video I show a potato digger I made, which I have been using to dig potatoes for more than 3 years on my plot.

The potato digger is made from scrap materials for the Neva walk-behind tractor, without the use of a screen. Lightweight, simple, reliable and at minimal cost.

8. Homemade wood splitter for walk-behind tractor

Screw cleaver for walk-behind tractor

Branch chopper + wood splitter for walk-behind tractor

How to make a wood splitter

Rack splitter

9. Homemade snow blower to the walk-behind tractor

Homemade auger snow blower for a walk-behind tractor with your own hands

10. Homemade seeder for walk-behind tractor

Corn seeder for walk-behind tractor

11. Homemade trailer for a walk-behind tractor

The trailer can be attached to a car, mini tractor and walk-behind tractor

Do-it-yourself walk-behind tractor trailer

Dimensions of a trailer for a walk-behind tractor and a mini tractor with your own hands