The new bed is creaking, what should I do? What to do if a bed with a lifting mechanism creaks

Lamellas (latoflex) - they are also called lats, or bends - these are bent-glued wooden planks with an arched profile. This is the same veneer from natural wood, produced by sawing or planing.

The wooden lamella has good elasticity compared to boards, plywood or chipboard. Elasticity is achieved due to the unidirectionality of wood fibers.

Where are slats used?

Flexible furniture lamella is used to make wooden products, furniture frames, chairs and armchairs, musical instruments, sports equipment.

But slats are especially widely used in the manufacture of beds. Good orthopedic mattress, for example, can provide normal sleep only if there is a high-quality, reliable foundation. A lattice of lamellas is precisely such a base. Well, if the mattress is not orthopedic, but ordinary, polyurethane, then the lamella base will give orthopedic qualities to it too.

A set of slightly curved planks forms the springy bed frame, on top of which the mattress is laid.

The flexibility of the bed increases with the number of slats. The optimal number for a double bed, according to experts, is 30 pieces, respectively, 15 for each bed. The length of the slats is determined by the width of the bed, and their standard thickness is 8 mm. The gaps between the slats should not exceed the width of one plank.

The slats can be attached to the bed frame with special holders made of plastic, rubber or polypropylene. In turn, the holders are attached to the frame with rivets or furniture staples.

There is an option when each individual strip is placed directly on the metal frame- stand.

Have a good night's sleep!

The value of a slatted bed base is as follows.

The spring properties inherent in bed slats allow you to correctly distribute the load on the body of a lying person. The spine occupies a natural, comfortable position during sleep; he does not experience excessive tension, as when sleeping on a very hard bed, but he does not bend, as on an overly soft bed.

The spaces between the slats provide good ventilation mattress, which prevents the appearance unpleasant odors and humidity, and also prevents the proliferation of harmful microorganisms.

The base made of lamellas, thanks to the same springing properties, significantly extends the life of the mattress, since it takes on a significant part of the load intended for the mattress.

Cheaper - birch, but better - beech

The slats are made of birch, oak, and ash. But slats made of beech, a valuable type of wood, are especially popular and practical. It is hard and durable. The texture of beech wood is distinguished by its beauty and high decorative qualities, especially in tangential and radial cuts.

In terms of strength, beech is not inferior to oak, and its breathability is almost ten times higher. Beech is well processed, sanded, tinted in any color, accepts varnishes and stains well, is finished with varnish and wax, and reliably holds fasteners. Naturally, with all these excellent qualities, beech is also the most expensive of the lamella materials.

The most economical option is birch.

If they creak

The creaking of the bed is a very annoying and irritating sound. Its source can be, for example, bed legs or joints, as well as slats. If the search for the “culprit” of the squeak clearly points to the lamellas, try lubricating them with paraffin or wax candle. Sometimes it helps to pull out the lamella, wrap it with a strip of fabric and insert it back. In some cases, it will be enough to simply swap the slats. Well, a radical way to combat the creaking of lamellas is to replace them with two sheets of plywood and carefully screw them to the frame.

After a hard day you can lie down on comfortable bed and get some sleep. However, sometimes sleep is disturbed by a nasty creaking noise, which does not allow you to fully rest.

Creaking wooden beds have never brought pleasure to anyone. How to get rid of the problem that has arisen?

Creaking of a wooden bed: eliminating the nuisance

Try to determine exactly what is squeaking, starting with the mattress. Take the product to the floor and crawl along it, listening to the sounds.

If the mattress squeaks, then buy a new one, sparing no expense. If everything is fine with him, continue to look for the problem area.

Fastening joints can also cause squeaking. In this case, it is worth tightening all the screws securely.

The joints of the elements can be lubricated with soap or silicone. Such products eliminate friction, so the squeak disappears.

If the lamellas creak, then you should do things a little differently. These elements are lubricated with paraffin or swapped.

The slats bear the main load, so over time they may even become cracked. If suddenly the creaking does not disappear, then replace these elements with new ones.

Most difficult option- these are extraneous sounds that arose due to the loose legs of the bed. It is very difficult to repair such elements.

Craftsmen often suggest cutting down the bed legs to get rid of the problem. Modern factories practically do not produce products using such elements.

These are the main ways that will give you the opportunity to get rid of the squeaking of a wooden bed. If you do everything correctly, you can get enough sleep and wake up rested and invigorated.

Advantages of wooden beds

You have already figured out how to eliminate squeaking. And now it’s worth mentioning the advantages of wooden beds:

wood is considered safe material, which is not capable of harming human health;
the products are very practical;
a wooden bed will last a very long time;
It is easy to care for the product, because it is enough to wipe the surface with polish from time to time;
Wooden furniture will fit into any interior, making the room as cozy and warm as possible;
The products are very comfortable, so you can get enough sleep and not feel tired.

These are the main points regarding the use of a wooden bed. If you make a choice in favor of such products, you can get a lot of significant advantages, because your home will become not only stylish, but also cozy.

Any material changes its shape and characteristics over time, and accordingly, defects may appear in coatings and objects made from it. The bed creaks - how to eliminate this unpleasant, ear-piercing sound? This phenomenon brings a lot of inconvenience to household members, due to the fact that it is impossible to turn around at night without disturbing someone’s sleep. When finances do not allow you to update your sleeping place, the question arises of what to do to remove these unpleasant sounds.

Determine the cause of the squeak:

The first step is to remove the mattress with orthopedic bases from the bed structure and place them on the floor.

Important! An orthopedic base is a special base made of wooden planks - it is located under the mattress.

Check if the mattress is squeaking. You need to make sure that this mattress is not a source of unpleasant squeaking before you move on to checking the frame of the sleeping place itself. You need to get on the mattress and move around a little. If creaking is heard, then it is caused by the mattress.
Check for squeaking orthopedic base. You need to press on it from above and try to shake it. If you hear a squeaking sound, most likely it is this that is causing all the problems.
Shake the legs of the structure and listen carefully. An unpleasant sound often appears where the butt joints between the legs and the rest of the frame are located.

Important! You must try to find the exact place where the creaking comes from.

Rock the support strips from below on the inside of the structure frame. Support strips are usually made of wood or metal. They are always located at a certain distance from each other and stretch from one side of the frame to the second. An orthopedic base with a mattress is later laid on the slats. You need to press down on each support bar to see if they make an annoying sound.

Important! Very often, the cause of a squeak is caused by the friction of one wooden part against another.

Eliminating squeaking

So, now you can answer the question of what to do if the bed creaks. To save your sleeping place from creaking, you need to follow this algorithm:

Take it all necessary tools for further work with the part of the bed that turned out to be faulty. You need to look at exactly how the butt joint of the bed frame is arranged, and at the place where the sound comes from. If in your case the fastening is on screws, you need to take a screwdriver the right size. If it is bolted, arm yourself with a wrench.
Tighten the butt joint that is making the noise. Often the main cause of bed squeaking is weak fastenings in the butt joints. Before disassembling the frame, you need to tighten the screws and bolts in those places where the unpleasant sound is coming from.
Use a washer if there is any difficulty with the bolt not being fully tightened.
Completely disassemble the butt joint if the bed still creaks. Use your tool kit to unscrew and remove any bolts or screws that hold the parts together. They put the removed ones in a separate place so as not to accidentally lose them. Separate the frame parts that are included in the problematic butt joint.
Lubricate all butt joint elements. Apply lubricant to the surfaces of the two butt joint parts touching each other. The following will be listed best views lubricants for this purpose:
- Paraffin is a waxy substance that comes in the form of bars. They are easy to rub on the parts you need.
- WD-40 is an aerosol lubricant suitable for use on beds that have a metal frame. The only downside is that it can dry out over time.
- To remove bed squeaks, you can use candle wax. They need to rub the parts being processed.
- Silicone grease. You can purchase it at a hardware store, and then use it to treat all problematic elements of the butt joint - this way you will get rid of squeaking for a long time.
Reassemble the bed frame. Return to their places all the parts that were unscrewed, tighten all the bolts and screws.

Important! You need to make sure that all fasteners are tightened tightly to prevent them from making more noise later.

Check to see if the squeaking has stopped. Try rocking your sleeping area to see if any annoying sounds remain.

We fix problems quickly

A wooden bed creaks - what to do if you cannot repair it yourself? Below will be written a few useful tips to solve this problem:

Pad the frame support strips with unnecessary clothing. The fabric will prevent the orthopedic base or mattress from creating friction with the bed frame.
Use cork sealant to fill excess gaps in wood frame bed frames.
Place a towel or other fabric under the uneven legs of the bed to prevent it from rocking and making unnecessary sounds.
Place a book under the mattress near the source of the squeak. If the annoying sound comes from the support bars, it is necessary to remove it from sleeping place mattress with an orthopedic base, then place the book on the creaking bar. After this, you need to return the orthopedic base and mattress to their place.

All photos from the article

How to get rid of the creaking of a wooden bed if it has caused restless sleep? It is necessary to establish the causes of unpleasant sounds, determine their location and take measures to eliminate these causes. We will tell you how to remove the creaking of a wooden bed and restore silence in the bedroom.

Determining the causes of the squeak

Most common problems

Most people prefer to buy wooden furniture out of habit and aesthetic preferences, since no material can compare with wood in terms of the beauty of its design. However, it should be understood that this material has special properties, including a tendency to deformation and changes in geometry. They lead to undesirable effects, such as creaking.

Important!
The strength of wood is relatively low, and the places of fastenings, joints and connections become loose and loose over time, which causes play, which results in friction, leading to squeaks.

So, we have shown that the occurrence of noise is almost inevitable due to the properties of wood, and most often they arise for the following reasons:

Wooden parts shrink or absorb moisture, and their geometry changes. Uneven changes in the dimensions of fasteners, changes in gaps and cracks lead to friction and backlash, which cause unpleasant sounds; (See also article.)
Places where boards are fastened with bolts, tenons, nails or self-tapping screws gradually wear out under the influence of loads, holes enlarge, fastening tenons or dowels are deformed, screws are unscrewed and nails become loose. All this leads to displacement of parts relative to each other with inevitable friction and creaking;
The geometry of the frame itself changes, the legs give way, the angles change. The structure becomes less stable, loads begin to act in other directions and again lead to noise and creaks.

In addition, the mattress can creak, especially if it is spring. Also on wooden frame a metal mesh may be installed to support the mattress, which also sometimes begins to make sounds.

What to do if a wooden bed creaks? First, find out the reasons.

Finally, the floorboards located under the legs of the bed can creak. Also, the back or side board of the product may rub against nearby furniture or a wall.

Determining the problem area

Now you need to find the source of the sound. This is important, since accurately determining the location will make it easier to eliminate noise.

It is necessary to shake the structure along the longitudinal and transverse axis, while listening carefully. If noise occurs, then the problem is in the frame or the leg mounts.

If the swaying does not produce any special sounds, then you should lie down on the bed and turn around on it. If this results in squeaks, then the problem may be in the mattress, support slats, or. Try to understand where exactly the noise is coming from.

You can also remove the mattress and turn it 180˚. In addition, you should move the mattress and lay it as evenly as possible in the center, and if it was still lying there, then, on the contrary, move it slightly: changing the distribution of loads can eliminate the cause of the sound.

Important!
Try moving the bed a little.
Perhaps the floorboards are creaking or the back is rubbing against nearby furniture.

Eliminating squeaking

It is not necessary to call a specialist to repair your stock, because the price of his work will be rather high; it is better to do everything yourself. The instructions do not require any special skills and are quite simple.

First you need to check all connections. These can be steel angles, nails, screws, tenons or dowels. The parts must fit tightly and not wobble.

The drawers often become loose at the points where they are attached to the headboards. The frame itself on which the structure rests may also become loose. Finally, the problem area is the attachment of the legs.

The easiest way is to disassemble the bed into its component parts and seal the joints. Pieces of leather or rubber are placed between the metal corners/plates and the wood and then tightened with screws. Thin wood chips can be placed in the screw holes for a stronger connection.

Wooden dowels and tenons must be wrapped in polyethylene or tape. Lubricating with wax, soap, paraffin or by special means type VD-40.

It is necessary to sort out the slats under the mattress. They often become dislodged, cracked, or simply become unusable. They can be swapped, damaged strips can be replaced.

If there are bolted connections, they must be slightly tightened with a wrench. The screws can be moved slightly and tightened in the new location. If nails have come out, they should be replaced with other fasteners, e.g. steel corners or plates, dowels, screws.

Important!
Eliminating squeaking comes down to sealing and lubricating all existing connections, joints and fasteners.

Conclusion

Wooden beds creak for natural reasons, so you shouldn’t be surprised at the appearance of noise. You can eliminate them yourself by sealing joints and cracks, lubricating rubbing parts, and strengthening the structure. The video in this article will help you better cope with the repair.

Healthy and sound sleep improves mood, increases performance, and makes you look at the world optimistically. But sometimes a regular bed prevents you from getting a good night's sleep. If every movement on the bed is accompanied by annoying sounds, you need to quickly figure out how to get rid of the creaking of the bed in order to make your nights calm and your dreams serene. There are several methods that are suitable for furniture made of a particular material.

How to get rid of a squeaking wooden bed?

Wooden beds look luxurious, but over time they begin to creak. This is due to the fact that the material is deformed during operation. Gaps appear between the fasteners, friction occurs, which causes an unpleasant sound.

Find out how to get rid of a squeaky wooden bed so you can enjoy a restful sleep.

To make the bed last as long as possible, it is recommended to choose high-quality species: mahogany, oak, walnut. Their service life is maximum.

What to do if the creak has already appeared? Try to eliminate it. First of all, you need to determine the location of the squeak, then proceed depending on the situation.

The fasteners have become loose. You need to tighten the screws all the way. If this does not help, you should secure the parts with rubber glue. The surfaces must first be degreased with alcohol. After gluing you will no longer be able to disassemble wooden bed, but the squeak will disappear.
The slats have become unusable. Swap them. If this does not help, then wrap each lamella with fabric or treat it with wax or paraffin. In extreme cases, you will have to change the base.
The legs of the bed were loose. Repairing these parts is very difficult. Most often, craftsmen advise sawing them off altogether. In this case, you will receive an exclusive model that will not only enliven the interior, but also stop creaking.

Sometimes creaking occurs for a trivial reason - due to changes in floor level. Then you just need to move the bed to a new place or put something under the legs to give stability.