How to paint an MDF cabinet with your own hands. How to paint MDF furniture white? How to artistically paint a closet and create color gradations

Almost every owner or hostess periodically has a desire to change something in the ordinary interior of their apartment or private house. However, unfortunately, it is not always possible to achieve the desired result by rearranging furniture and other interior items.

In such cases, it usually helps not only to move objects, but also to change their appearance by painting them in different colors. Since the vast majority of furniture is made from commonly available and inexpensive materials, such as MDF, then the question often arises of how to repaint MDF furniture yourself without involving third-party specialists.

Changing the color of the entire furniture or its individual components can radically change appearance premises and give it a new twist. In order to do this work with your own hands, it is not at all necessary to have special practical skills or complex factory equipment. It is enough to purchase the necessary paints and varnishes, prepare the tool and you can get to work.

Tools and materials needed for painting

To change the appearance of the furniture, you will need to prepare in advance all the material and tools in the required quantity, and also set aside a little time so that the work proceeds without haste and hitches.

For the interior you will need:

paint, one or more colors depending on your idea;
wood putty, for partial repairs and sealing of joint cracks;
paint container;
masking tape of the required width;
roller with fine pile length;
flat brush;
protective hand gloves;
respirator for protection respiratory tract from toxic emissions of fresh paint;
protective glasses.

In some cases, laminated MDF may be useful; primer on the laminated surface is not required. Before painting MDF furniture, also prepare sandpaper; it may be needed to clean the putty and end surfaces. It is important to approach the surface preparation process with special responsibility, since the final painting result depends on this stage of work.

Which paints and varnishes to choose for the job?

Before starting painting work, it is necessary to accurately determine the desired end result in advance. Based on this, choose the appropriate coating.

The substances used for furniture decoration can be divided into two main types:

transparent;
opaque.

Opaque substances are used to create a protective layer and enhance the natural color of wood through the use of special pigments.

Such substances include:

azure;
drying oil

The price of these coatings is significantly higher than that of pigment paints and they are used mainly for expensive furniture made from pure wood of expensive species. If the furniture is made of ordinary MDF or other similar materials, then you can also use products based on acrylic, latex or polyurethane.

Tip: If pieces of furniture are quite old and have minor scratches, then water or oil-based compounds are used to finish them.
Painted MDF furniture using water-based paints looks very beautiful and is quite expensive.

IN Lately Alkyd mixtures are popular because they are easy to apply to the surface, dry quickly, but, unfortunately, have a relatively short service life compared to oil or water-based ones.

Polyurethane-based substances are also actively used, which are easy to use and have a long service life, but during operation they emit toxic substances and require ventilation of the room. It is important to remember that each composition has instructions that indicate how to properly apply the composition to the surface and under what conditions it can be used.

Preparing the surface for painting

This is the most important part of the entire event, on which the entire final result depends. Many people often ask the question: is it possible to paint MDF furniture without preliminary preparation?

It is possible, but not recommended, since in this case the paint may not adhere well to the surface and when used under conditions of frequent mechanical stress or temperature changes, such a coating will very quickly become unusable, crack and may even peel off.

To prepare, you need to sand the surface to create a rough surface. If there are large cracks or scratches, it is advisable to fill them and sand them again to eliminate differences and unevenness. The purpose of sanding is to eliminate surface smoothness, which negatively affects adhesion.

After preliminary preparation, a primer is applied to the treated area. The primer will provide the surface with additional adhesion and significantly reduce the consumption of paints and varnishes.
The primer also allows you to create a kind of barrier between the paint and the natural substances of the wood itself, which, when released, can affect the quality of adhesion of the layers and lead to disastrous results.

The process of applying paint to a surface

The process of applying the decorative composition is as simple as possible, but it has its own characteristics:

It is recommended to apply layers to the surface strictly in one direction;
the last layer must be applied along the surface being treated;

do not start applying the second layer until the first one has completely dried;
the surface to be treated must be completely dry and free of greasy stains;
try not to apply more than two layers of paint.

Tip: If wood is used with high voltage devices, then in such cases Zinga conductive paint is used, which will provide additional insulation from electric current.

Conclusion

If the furniture is located in close proximity to fire, then fire-retardant paints for metal Polistil can be used, which adhere well to the prepared wooden surface and protect against deformation and damage when exposed to high temperatures.

Even more interesting information you will find in the video in this article.

MDF panels are construction material, intended for finishing premises, cladding the facades of cabinet furniture or walls, it is made from wood chips of low or medium thickness. These parts are considered an environmentally friendly finishing element, since synthetic materials are not used in their production. adhesive compositions, and natural wood resin is used, which reliably fixes all layers of the product and forms a single whole. MDF panels have medium and low density, depending on the number of layers and composition of the wood. Over time, during the operation of these parts, their surface may become scratched, the coating loses its gloss or has defects, as a result, the integrity of the entire panel is compromised, and the appearance of the entire finish becomes unsightly. Any owner in this case is faced with the question: how to update the facade of the panels without completely changing them?

This article discusses the possibility of painting products such as MDF wall panels, whether it is possible to paint MDF, as well as the process of carrying out such work at home.

Reasons for the formation of defects

There are a number of reasons why painting MDF panels may be necessary, including:

Mechanical damage to the surface as a result of impact with a sharp object or other material. The top layer of the MDF panel consists of laminated or plain paper with paint applied to it; when exposed to a hard object, the film breaks, which exposes the core of the entire product;
Paint fading, loss of color brightness. This deformation is caused by exposure to ultraviolet rays and atmospheric air, which contains a small amount of moisture. Over time, the coating becomes matte, loses its shine and original appearance;
Temperature changes also negatively affect the external condition of the surface of MDF panels, since the internal structure consists of wood, which absorbs moisture from the atmosphere and at the same time swells over the entire area. When the temperature rises, MDF dries out and may crack; moreover, the glue contained in the panel loses its ability due to moisture, which leads to peeling of paper, lamination and shavings.

These causes of deformation lead to an unsightly appearance of the entire surface and disrupt the overall design of the wall. If these defects occur, you can paint MDF panels after first completing a number of preparatory procedures, but you should understand that painting parts with your own hands at home brings a result that differs from processing with paints in production.

Painting process for MDF panels

Before answering the question of how to paint MDF panels, you need to understand the composition of this product. An MDF board, wall or facade, consists of several layers of compressed paper and sawdust, laminated with a transparent or colored film on the front side. Most often, it is the top layer that is subject to damage and wear, so when planning to update MDF, you need to prepare the specified types of coatings.

In order to prepare MDF panels for painting at home, you will need:

Sandpaper for preparing the surface and removing gloss or varnish;
Solvent for degreasing the surface from glue and liquid residues;
Dry rags or other lint-free cloth.

These materials are necessary for pre-treatment of MDF panels for painting and sealing cracks and scratches on the laminate.

All work must be carried out in accordance with the action algorithm. The first step is to sand the panel with fine sandpaper; this can be done manually or using a pneumatic tool. It is important to follow the varnish removal technology, to prevent overheating of the surface or the formation of large marks on the laminate. The wood-fiber surface is under the decorative film, so when sanding you need to carefully monitor the thickness of the top layer so as not to erase it completely. After this procedure, the coating will no longer shine and will become rough and slightly scratchy.

Next, you need to clean all cracks and chips from dirt and dust, and also clean their edges. All irregularities, if necessary, are smoothed over with a special putty, which forms a single whole with the base of the panel; it also needs to be leveled with sandpaper.

After the surface has been processed and leveled, it must be wiped with a dry cloth and degreased with a chemical solvent, which will displace and evaporate all water and wash away dust and dirt.

At the next stage, the top coating is primed with a special paint; it has a grainy texture and can be applied using compressed air or a simple brush. It can be used to cover the surface in several layers, with intermediate sanding, until the required smoothness is achieved.

Next, the base paint is prepared, tinted and thoroughly mixed so that all the elements are mixed together. You can paint MDF panels manually or with a special pneumatic gun, but this will require a compressor unit and a moisture-water separator. The composition is applied with smooth movements in two layers: the first - across the main direction, the second - along the entire length of the part. Thus, the formation of smudges and paint sagging is prevented.

The final step will be to treat the top paper-wood layer of the panel with transparent varnish. This procedure is not necessary, but after it is carried out, the surface of the MDF product becomes glossy, its top layer seems renewed, and the appearance of the entire structure is restored.

For your information. It is important to observe the drying intervals for elements between layers of primer, paint and varnish, since otherwise they will curl and crack, and you will have to do all the work again.

How to paint and renew MDF panels

For MDF panels, you can use alkyd or acrylic enamel, but when choosing a paint, you should take into account the type of primer, operating conditions of the panels, and the composition of the top layer. If it is laminated paper with a synthetic, weakly absorbent film, then it would be advisable to use acrylic or water-dispersion enamel. These materials are environmentally friendly and are perfect for interior painting indoors, while the surface of the panel will be renewed and also additionally protected from the moisture of an aggressive external environment.

Thus, if the entire painting technology is followed, the question of whether it is possible to paint MDF panels becomes completely solvable at home.

Perhaps there is not always enough money to update the interior. MDF painting- this is a solution if the furniture frame is intact, but you want to transform or change the design. You can try to repaint the facade of the kitchen or other MDF furniture yourself.

It’s good that modern technologies and materials make it possible to paint MDF at home quite efficiently. Let's take a closer look at how to paint MDF facades with your own hands using standard technology.

Painting MDF facades is a rather labor-intensive process that requires patience and diligence. And also purchase quality materials, to get a good result. The materials used to make furniture are wood or furniture boards. Recently, the use of MDF facades has become increasingly popular. To repaint furniture, you need to prepare materials that are standardly used for wood processing. These include:

Sandpaper with to varying degrees abrasiveness.

Masking tape.

Equipment for painting facades (spray gun).

Various compositions for degreasing, priming, painting.

Let us consider in detail what these materials are and what function they perform.

Sanding paper

For the process of sanding MDF boards, ordinary sandpaper is used. It is used with varying degrees of abrasiveness and at different stages. In each individual case, the sandpaper grit changes. MDF is a fibreboard that is processed similarly to wood. Thus:

When preparing the surface for priming, we will use 220-280 grit sandpaper.

To remove uneven application of primer, use sandpaper with an abrasiveness of 320.

Final sanding before painting is done with 500 grit sandpaper.

For ease of work, you can use sandpaper with a foam or felt base.

Sprayer for painting

You can paint MDF facades yourself using paint brushes or rollers. This is a completely acceptable option, but it will be impossible to achieve a flawless surface. Therefore, it is better to use paint sprayers to process MDF furniture with your own hands. In addition to the quality of application, the spray gun will make it possible to speed up the process.

Advice! Use paint sprayers for the priming process as well. This will significantly speed up the application of primer.

Paint sprayers are divided into two types: electric and pneumatic. You should also pay attention to the diameter of the spray rod. For painting MDF, rods with a diametrical cross-section of 1.2 - 1.3 mm should be used so that the painting material is applied in a very thin and uniform layer.

Degreasing agents

Very important point Before painting MDF furniture facades, carry out the procedure of degreasing the surface. If you ignore this process, then after completing all the stages, defects may be discovered that can only be corrected by doing everything completely again. Degreasing of MDF facades is carried out using compounds that contain organic solvents. Such products successfully remove various oils and fats. They also work well with polyorganosilicones.

Types of primers

Furniture facades cannot be painted without a priming process. This is also one of the guarantees of fulfillment quality work. It is priming that will ensure reliable adhesion of the surface of the facades with paint and paint compositions. You can use several types of primer that are also suitable for MDF surfaces:

for plastic surfaces;

epoxy;

steam-filling.

Surfaces from natural wood It is not recommended to use epoxy primer. And prime MDF boards one by one with all primers: plastic, epoxy, vapor-filling.

Painting materials

There are two types of enamel paint for MDF:

alkyd based;

on acrylic base.

The first is a derivative of alkyd resins. You can quickly paint MDF panels with this paint, since after application to the surface it quickly hardens when optimal temperatures and degree of humidity. Costs less than acrylic, but requires final varnishing.

Acrylic enamels are more convenient when working with MDF, since they absolutely do not require applying a varnish layer. After treating the surface of this type of paint, an ideal glossy layer is immediately formed.

On video: MDF painting technology.

How to prepare MDF facades for painting

Painting MDF with enamel requires very careful preparation. The quality of the enamel coating depends on how responsibly you approach this process.

It consists of several points that must be performed correctly.

Removing old coating

An important tip that we pay attention to: you cannot apply paint for kitchen facades or other pieces of furniture to painted MDF. The adhesion of the layers will be very weak and the new coating will peel off very quickly. To avoid negative consequences, perform Preliminary processing MDF. Before painting the product, it is necessary to remove the old gloss using coarse sandpaper. It is not necessary to completely remove the gloss; you can simply disrupt its integrity in such a way that grooves are formed over the entire area, which can increase the adhesion of materials.

Primer work

The technology for painting MDF with primers consists of several stages. But do not forget that before repainting the furniture and treating it with a primer, the surface should be degreased.

After the degreasing process, do not touch the surface with your hands.

The process begins by priming with a primer for plastic surfaces. Experts recommend starting from the ends and hard to reach places. This type of primer is applied in two layers. Each subsequent one only after the previous one has completely dried.

To achieve a uniform color, both with paint and primer, it is necessary to apply each subsequent layer perpendicular to the strokes of the previous one.

The next primer is epoxy. Apply 1 or 2 layers. Drying should be done at optimal conditions at least a day.
The next layers are vapor-filling primer. This substance is tinted, so it is necessary to choose it correctly. If you plan to use light-colored paint, then the primer should be white. In the case where the surface is smooth, one layer of primer is sufficient. Otherwise, we evaluate it based on the density and condition of the kitchen façade.

Final sanding

On last stage To prepare MDF for painting, it is necessary to sand it. To do this, use sandpaper with the finest grain.

Moreover, you don’t need to press it too hard so as not to disturb the primer layers. If, after all, after sanding, areas with open pores have opened, then they are treated with a one-component putty.

The final sanding process is also an important point, since during this process excess putty and Orange peel, which is formed by layers of primer.

Paint application instructions

Before painting MDF, it is necessary to clean the surface from any dust that remains after finishing sanding. It is better to do this by degreasing. Next we present detailed description technologies for painting MDF facades. Is it possible to do the work when painting MDF with your own hands using a paint brush? I guess, yes. But the result will not be perfect. So, they repaint the furniture according to this algorithm:

The first rule: prepare the dye for application according to the manufacturer's instructions.
We fill the sprayer and adjust its operation so that the capture area is small. This will allow you not to waste extra material and paint more thoroughly.
The process of applying the coloring material also begins with the most problematic areas, and then moves on to the main area.
It is better to apply several layers. The painted products are dried at intervals of about 20 minutes.

If you have no experience working with a spray gun, then it is necessary to carry out training work on some test workpiece.

In the video: mistakes when painting with a spray gun.

After painting the MDF, it should be coated with furniture varnish, which allows you to create a gloss. The process is exactly the same as when applying paint. But you should prepare for it more carefully. The room in which work is performed must be perfectly clean. If the workshop is dusty during varnishing, then it will be difficult to achieve a mirror gloss.

Painted MDF samples

How to paint MDF facades at home

MDF appeared relatively recently. What distinguishes this material from others is its rather dense structure. The wood is reduced to a fine powder and then glued together into a uniform structure. The density is higher near water, it sinks.
You can find MDF different manufacturers. Chinese plates have a density of 1050...1075 kg/m 3, European ones are heavier, usually 1130...1160 kg/m 3. The difference is not only in density. The quality of slabs made in Switzerland or Poland is much higher than what China offers. Furniture makers and builders are very fond of this material. European samples:

almost do not swell in water, the dense structure is glued into a monolith that can withstand high loads;
with mechanical processing it is possible to achieve High Quality surfaces;
from high-quality MDF it is possible to produce products with complex profiles that will be superior to products made from solid hardwood.

Unfortunately, Chinese MDF does not always correspond to the declared quality. Several factories producing chipboard and MDF in Russia have not yet reached European levels. Therefore, additional protection is required when using them.

How to protect MDF panels

Production from MDF boards has been established door leaves, some manufacturers even put on the market door frames from similar material. Consumers are offered a variety of input and interior doors. Using a laminated film glued to the surface, wood of different species is simulated (Fig. 1). The extremely machine-friendly material allows manufacturers to produce most types of glazing. Enormous scope for creativity for designers.

Rice. 1 Samples of MDF doors

Furniture makers also saw MDF boards as extremely comfortable material. A wide variety of furniture facades are made for cabinet furniture, kitchens, bedside tables and tables (Fig. 2). Combine solid and glazed products. A choice for every taste.

Rice. 2 Samples of furniture facades made from MDF panels

During construction, laminated panels are used for finishing rooms, which are used to complete or partially finish rooms. The use of such material greatly simplifies the work of creating any interior. Thin panels are easily mounted on the wall, and then can serve for decades without visible damage (Fig. 3).

Fig.3 Wall panels MDF

In addition to cladding with film, painting with paints will provide excellent protection for an excellent material. To ensure that the facade does not become saturated with moisture and remains dry throughout its entire mass, it is necessary to close all capillaries from possible penetration. Painting accomplishes this task.

How to paint MDF facades

For products containing wood, all types of coloring materials recommended for wood are suitable. There are only certain features:

The structure of MDF is quite dense, there are no pores;
the properties are the same in all directions;
contains adhesives.

Before applying layers of paint, you need to impregnate the MDF. If you simply paint with enamel, the coating will not adhere firmly enough to the surface. The glue used to glue fine particles is reluctant to interact with paints. Therefore, pasting with films is easy, but painting is associated with certain difficulties.

At the first stage, a primer is required. Without it, you cannot count on obtaining high-quality coating of MDF facades with paint.

Primers for MDF

Craftsmen know that to obtain a high-quality surface, MDF should be used polyurethane primer insulator PaliWood UM 002 primer (Fig. 4). With its help, they achieve not only penetration into the structure. A dense layer is formed on the surface, which can be sanded to achieve a glossy shine.

Rice. 4 Polyurethane primer for MDF

Wipe the surface from dust and other contaminants.
Apply a layer of primer to the surface to be treated. (The manufacturer recommends using rollers, but you can use a brush or spray gun).
After drying, remove the deposits with a scraper, and then use fine-grained sandpaper to bring the surface quality to a shine.

In furniture production, alkyd primers are used for MDF facades (Fig. 5). They contain not only binders with high adhesion. Pore fillers are also available. They eliminate irregularities, penetrate into pores and capillaries. The main advantage is the formation of a dense film through which moisture will not penetrate inside. MDF panels can be installed not only indoors. Treated with moisture-resistant soils, they perform their functions, located on outdoors. You just need to additionally coat them with alkyd-based enamel.

Rice. 5 Universal alkyd primer (recommended not only for MDF, has a wide range of applications)

Rice. 6 Alkyd primer for exterior and interior use

Users especially note alkyd primers made in Finland or Finnish technology(Fig. 7). For surface preparation in children's preschool institutions, in medical buildings and other places where the requirements for the quality of work are quite high, it is recommended to use Tikkuril products.

Rice. 7 Alkyd primer for universal use

For facades used indoors, acrylic primers are offered. They form a transparent film (Fig. 8). Acrylic primers also contain foam fillers, but their size is much smaller than that used in polyurethane or alkyd materials. Therefore, the penetrating power is higher. Manufacturers claim that acrylic primers can serve outdoors. Here it is necessary to clarify that they can be used outdoors, but do not allow moisture to enter. That is, MDF facades can be painted only if further operation will be under a canopy or other protection from rain and snow.

They produce a pretty good primer that will satisfy many consumers. Here, with good quality, a very interesting price (Fig. 9).

Rice. 9 Acrylic primer for facades made of plywood, chipboard and MDF

How to paint MDF house facades

When I paint MDF facades, I pursue certain goals:

facades after painting do not perceive an increase or decrease in temperature, so they are used for the manufacture of kitchen cabinets, bedside tables and pencil cases;
painted in different colors MDF facades look quite expressive;
after painting, the release of harmful compounds that may occur due to the glue used in production stops;
service life increases several times.

Two-component polyurethane paints provide excellent coverage. Even a thin layer covers the surface perfectly. Enamels that give a bright shine are in great demand. It is recommended to use automotive enamel for kitchen cabinets and bedside tables (Fig. 10).

One-component polyurethane acrylic enamel(Fig. 11) is also worthy of the attention of masters. According to user reviews, the use of such paints for MDF panels gives excellent results.

Rice. 11 Polyurethane acrylic enamel

Alkyd enamel is used to paint furniture in children's rooms (Fig. 12). Furniture in which MDF facades perform decorative and protective functions looks great. Bright colors bring joy to the children's room. This paint is recommended for medical institutions. Safety is guaranteed by manufacturer certificates.

Rice. 12 Alkyd enamel for MDF

Professionals use spray guns for painting. IN in capable hands on the surface of a dense structural material for furniture, high-quality glossy finish. At the request of consumers, it is also possible to apply a matte layer of paint, which will reliably protect the product and give it new consumer properties.

Video: Applying paint and varnish to a furniture facade made of MDF.

Paint and varnish from Sayerlack.

How can you update your kitchen if you don’t have enough finances to purchase a new set? Options: buy new facades, order the company’s craftsmen, or repaint the furniture a different color with your own hands. How to paint kitchen facades to avoid bitter disappointments? What is the difficulty of recreating a beautiful coating on your own: high-quality painting of furniture with your own hands is only possible after a thorough, long-term cleaning of the old decorative layer. If paint residues are removed carelessly, the surface of the furniture takes on an unsightly appearance: uneven surface sagging, streaks, peeling of paint and varnish appear.

The paint has ennobled kitchen set

But the beauty of kitchen facades can be ruined not only by insufficient processing. Another mistake is choosing decorative paint for individual items without taking into account the combination with the interior. Imagine the messy look you'll get if you repaint your furniture French style Provence, giving lavender or milky-creamy languor and tenderness, in bright orange or poisonous scarlet shades. Colorful cabinets, decorated with antique vignettes, carved shelves, and gratings will literally hang over you with a stupefying weight. Therefore, before starting work, it is important to calculate all the nuances: the materials from which the kitchen is made, the selection of paints and varnishes, and the determination of the interior style.

Features of processing materials for kitchen facades

Most budget furniture sets are made of chipboard, fiberboard, and MDF. Each coating needs preparatory cleaning before painting the furniture. different ways. Let's consider the main preprocessing methods.

MDF facades

The covering material for MDF cabinets and countertops is a layer of polished veneer, film, plastic or enamel.

How to remove veneer

According to the instructions, lubricate the surface with a thick or liquid compound that dissolves the polish.
After some time, use a spatula to scrape off the softened wet layer in the direction of the wood grain.
Remove the remaining part of the coating using special iron wool or a grinding machine.
Clean the surface first with coarse sandpaper, then with fine sandpaper.
Clean the dust thoroughly.

To remove the film you will need a hair dryer; when exposed to heat, the coating will come off. Then wash off the glue, degrease, and clean as described earlier.

Plastic surfaces can not be removed, but the furniture can be painted with auto enamel.

MDF elements are very popular among sets, so learning how to paint them is very useful

Chipboard facades

Chipboards have a less durable structure than MDF, so when processing the coating, gentle wood preparations, a hair dryer, or abrasive sandpaper are used. Next, degreasing is carried out (white spirit, acetone). If the surface layer is not removed, then the area of the façade is simply leveled with fine-grained sandpaper, then cleaned of the dust layer with a damp cloth.

Preparation methods: primer and putty

A prerequisite for beautifully painting MDF and chipboard products is to apply layers of primer to improve the adhesion of the compositions, then putty to create a smooth surface without cracks or scratches, and prime again.

The shades of the primer and putty material are selected to match the color of the paint, in order to avoid glimpses of the lower layers and changes in the color scheme.

Application process:

a coat of primer for wooden surfaces to reveal scratches and pits,
acrylic putty,
primer 2 layers.

After the composition has dried, you can begin main operation: paint the kitchen facades.

Of great importance correct selection paint composition and quality of tools.

Correct preparatory activities always needed before painting

Methods for painting facade surfaces: coloring composition and more

Which paint to choose so that the appearance of the products is impeccably even and smooth?

How are furniture facades painted?

You can paint chipboard with brushes or spray guns with oil paints, water-based acrylic paints, alkyd enamels, drying oils, stains, and furniture varnishes. The advantages of water-based compositions are the ability to make adjustments before they dry: change the shade or dilute bright color to a delicate shade. But we get a more beautiful surface when using a special aerosol enamel composition.

MDF facades with plastic are painted using colored car aerosol enamels. At the same time, painted MDF facades for kitchens are waterproof, resistant to aggressive detergents and high temperature, strength. Coating with automotive enamel guarantees an even, sag-free layering.

Tools

Achieving an ideal kitchen surface with painted facades is impossible without the right tools and auxiliaries.

The following items will be required when carrying out this work.

The brushes are new, wide and narrow, flat.
A roller made of velor or foam rubber.
Painting tape.
Container for paint.
Rubber spatula.
Gloves.
Soft (lint-free) rags.
Acrylic paint, oil paint, or alkyd enamel, varnish.

Enamel and acrylic synthetic composition give a brilliant gloss, Oil paint and stain create a matte surface. Transparent dyes highlight the beauty of the natural structure of wood.

Learn to use a spray gun - it's not difficult

Technique for continuous painting of furniture

You can repaint chipboard furniture with your own hands using brushes or a roller. Spreading with a roller saves paint and distributes it more evenly. Decorative patterns must be applied with a brush.

To paint chipboard with your own hands, movements on the surface are made in one direction. The final layer is placed along the entire length. Each layer is applied after the first has dried: aqueous composition - after 30 minutes, acrylic - according to the instructions. If it is necessary to differentiate the color or material of the facade, use masking tape. Entrance doors Do not open until dry.

Painted MDF for the kitchen is obtained in the following ways: select the dye according to the coating material: for plastic, or wooden surface. When the composition thickens, dilute according to the instructions.

If you paint MDF with a roller or brush, then place the initial layer on the prepared area and dry it thoroughly.

Then apply the following layers one at a time, or alternately, with drying two, if the composition has low hiding power. A brilliant mirror gloss can be achieved using alkyd or acrylic transparent varnish.

The gloss effect adds individuality to the furniture

Decorative processing

Creating a refined, beautiful surface is achieved using additional materials.

The lace pattern is obtained using a stencil - lace tulle.
The technique of creating a relief surface is made using glissal.
Do-it-yourself two- and multi-color painting of kitchen facades is done by delimiting the area of the product with masking tape, or by applying stencils.
Gold and silver patterns are drawn out with a thin brush and after applying (drying) a layer of varnish.
Artistic 3D painting is carried out according to sketches using an airbrush.
Marble surfaces are created by glazing, highlighting the relief structure and drawing veins.
The relief graceful structure of the loach can be drawn with a simple comb.
If you apply a rough canvas or mesh to the surface, you will get unique facades for a rustic kitchen.
The use of bubble wrap allows you to create embossing that imitates alligator skin.

Painted kitchen facades can be colored with thin brushes and artistic paints near Gzhel, in the Palekh style, depict picturesque flowers, seascapes, cute faces of cats.

WATCH THE VIDEO

Painting kitchen facades with your own hands is a complex process, but an interesting and creative one. The time spent is more than compensated for by contemplating the open mouths of neighbors and acquaintances who have stopped by to see the light. Besides, how nice it is to have tea in a room where the painted facades remind you of splashing water. sea waves on the south coast, tropical hot jungle, wonderful forest, if you paint the kitchen set with your own hands. Fantasy is limitless, everyone can choose an element close to their heart. Good luck to you in your pleasant creative endeavors of decorating your home furnishings with your own hands!