Drawings of a children's bed for a 3 year old child. DIY children's bunk bed: drawings, diagrams, photos

For a newborn baby, the main place of stay is the crib. Parents try to choose only the best and safest for their children. However, quality items are quite expensive. The price of some imported cribs is prohibitively high. But what to do in such a difficult situation? Buy a cheaper model whose quality leaves much to be desired?

Remember important rule: saving on the health and well-being of your children is unacceptable!If you don’t have the opportunity to buy a good-quality crib for your child, then a DIY crib for a newborn is exactly what you need. It may be inferior in design to its store-bought counterpart, but you can be absolutely sure of the quality of this furniture. A do-it-yourself crib for a newborn, made with love, will become your child’s favorite resting place and a source of pride for the whole family. skillful hands dads.

DIY crib for a newborn - manufacturing technology

This article provides all the necessary information on how to make a crib for a newborn with your own hands: drawings, photos and detailed description process. The choice of material is not an easy question. The table below describes the most common types of materials for making a DIY crib.

MDF crib

Crib made of chipboard

Wooden crib

To begin with, you need to prepare all the necessary tools, materials for the crib and its decoration, components and be patient.

Materials for work

The most the best material wood is used to make a crib for a newborn. This natural resource environmentally friendly, safe, does not cause allergies and is pleasant to the touch. The best wood recognized for children's furniture beech: It is very durable and aesthetic. It might also be a good option oak, birch, ash and alder. Pine wood is quite soft and may not withstand the active pressure of children. So, You will need the following supplies:

Tools for work

In addition to materials, you will need to prepare a set of tools in advance:

• Level gauge and tape measure for measurements;
• Rasp;
• Manual milling machine;
• Hammer;
• Drill and suitable drill bits;
• Varima;
• Woodworking machine;
• Electric jigsaw.

Now, in more detail about how to make a crib for a newborn with your own hands: drawings, photos and instructions will help you understand this matter.

We determine the overall dimensions and draw up a drawing

The starting point is the crib mattress, or rather its dimensions. Spare no expense and buy your baby a high-quality mattress with a “complex filling” made of coconut fiber with layers of latex. Regular size children's mattress 1200 x 600 mm. You will find out what other children's mattresses there are from the table below.

Spring mattress

Springless mattress

Cotton wool mattress

The dimensions of the mattress are fundamental to determining the size of the crib. The height of the bed from the floor should be such that an older baby can climb into the crib on his own. It is recommended to make it equal to 350 mm.

The distance between the lattice and the solid wall of the crib is 12 mm, and between the rods - no more than 9 mm. Such indicators guarantee the safety of the baby. Based on these points, you can prepare a schematic drawing, which will make it much easier to work with.

How to proceed?

Now you have all the necessary components to make an excellent do-it-yourself crib for a newborn: drawings, photos of the model you like, and it’s time to start the manufacturing process. First, let's prepare everything necessary for assembly.

We produce materials and make crib parts

The following types of work need to be performed:

• Process using a machine wooden boards, which should be 70 x 35 mm in size;
• To construct the bottom you will need timber from which the frame is made. You will also need 6 transverse bars, in which you will need to make nests measuring 25mm;
• These notches can be made either on a machine or with a straight cutter;
• To calculate the back frame, you need to add to 600 mm the thickness of the side walls, multiplied by two and another 25 mm;
• For the bars of the lattice walls of the crib, 20 x 20 mm slats are needed, which are rounded on a milling machine.

Do not forget that this crib is made for a child, so all sharp corners and edges should be rounded and sanded.

Assembly of parts and finishing

When all the parts are ready, it's time to put them together:

1. We assemble the back frame using a 35 mm tenon;
2. We connect the side wall blanks with poles and two backrests using blind tenons;
3. Use glue to connect the back to the side walls. After the glue has dried, you can connect the parts with self-tapping screws;
4. After all the parts are assembled, the crib can be covered finishing material. Remember that at this stage the child's safety comes first. Therefore, all finishing materials must be absolutely harmless to the baby. Choose primer and paint based on water based. The varnish layer must always be sanded.

If you choose varnishes, then buy those with the NC marking. Only such materials are allowed for use on children's furniture.

How to assemble a crib yourself?

If you decide that a do-it-yourself crib for a newborn is too much for you and you bought a ready-made one in a store, then, for sure, upon arriving home you will have a lot of questions about assembling this piece of furniture.

If you are sitting at a loss in front of a pile of parts and cannot figure out how to assemble a crib, instructions, photos and recommendations will help you in this matter. In order to correctly assemble all the parts, you need to follow these steps::

1. All parts must be moved to the children's room. This will save you from moving the already assembled crib. Moreover, in this case the question will not arise: how to squeeze the bed into the doorway;
2. Unpack the box. Inside there is sure to be detailed information on how to assemble a crib, instructions, photos and a list necessary tools. As a rule, this is a screwdriver, a reversible wrench and a hammer;
3. Check the availability of all crib spare parts according to the list. If something is missing, then immediately contact the seller for a replacement or return of the product;
4. If suddenly there are no instructions, then you can check the complete set of all parts without it. Know that all cribs typically consist of the following elements: upper and lower parts, rubber furniture wheels, a support structure for the mattress and the mattress itself, two side thin boards. Inspect all parts carefully for defects.;
5. Now let's proceed directly to assembling the crib. Screwing the screws should start from the bottom and side backs. The screws must be loosely tightened. Next, we connect the back wall using 2 screws to the side backrests;
6. The next stage is the front side of the crib. Most models have this part solid and movable. This element must be inserted into the grooves on the side parts. Next, firmly holding all the fasteners, we check how freely the facade moves;
7. For rocking a baby, arc-shaped components that are located at the bottom of the side walls will be useful. When the baby grows up, they will need to be secured in metal grooves in the sides;
8. Critically evaluate the strength and stability of the entire structure, the strength of the bottom, the absence sharp corners and material defects ;
9. Next, we place the mattress in the crib and decorate the children's sleeping place to our own taste.

These simple instructions will help you assemble a new crib purchased in a store yourself without the involvement of a specialist.

Assembling a pendulum crib

The pendulum crib differs from all other analogues by the presence of a baby rocking system. This function is very convenient for the first months of the baby’s life. However, difficulties may arise with the configuration of this model. But further description of how to assemble a crib - pendulum: instructions, photos and step by step guide will help resolve this issue.

This type of crib consists of a frame, bottom, sides, legs and a pendulum mechanism. Also, such models can be equipped with special drawers for baby clothes and linen. The mechanism itself can swing up and down. When the need for it disappears, the structure is fixed.

Assembly is carried out according to the following scheme:

1. You will need all the elements of the crib, a work plan, screws, damping devices and a screwdriver;
2. The work area on the floor should be covered with a light cloth to prevent loss of elements;
3. We fasten the static back wall with screws to the side backrests. To avoid confusing the top and bottom of the back wall, use the legs as a guide;
4. The next stage is the installation of the bed. It can be either solid or slatted. The slats are inserted into special holes in the bar of the rear wall. At first, the stock is secured lightly with screws. Movable front component attaches to recesses on the side backs of the crib, which serve as guides. Next, the screw connection should be tightened more firmly;
5. Next, the finished body can be turned over and the pendulum system can be assembled. If the model has linen drawers, they are placed in inner space pendulum. Next, its side panel is secured with screws. The housing is mounted on the pendulum using bearings. Make sure that the notches of the clamps line up exactly. Caps cover screws for an aesthetic appearance.

A do-it-yourself crib for a newborn, carefully prepared for the baby, or purchased in a store that meets all safety requirements, will become best place rest and sleep of your child and will deservedly take a central place in the interior of the children's room. To carry out these manipulations, it is not necessary to call a specialist. Thanks to this guide on how to assemble a crib - pendulum (instructions, photos and recommendations), you yourself will cope with this task perfectly.

A crib is the first piece of furniture that young parents acquire. As a rule, a sleeping place is purchased before the baby is born. But children grow quickly and after a few years the cozy crib needs to be replaced by a more spacious bed. Quality furniture It is not easy to find, and its prices are not affordable for every family budget. If you have certain skills, you can go the other way and make a bed with your own hands.

Crib diagram

Cot
Children's bed

Ideal children's furniture should have the following qualities:

• made from natural, safe materials;
• have a “breathable” design;
• have enhanced strength;
• do not have sharp corners, protrusions or other dangerous elements;
• have a smooth, polished surface to eliminate the risk of splinters and scratches;
• match the height and weight of the child;
• protect the baby from falling;
• have high functionality (in addition to sleeping place have more sections for storing things).

Benefits of making a baby bed yourself.

1. You are confident in the quality of the materials from which the crib is made, since you choose them yourself and work with them yourself. For store-bought products, this parameter is not always obvious.
2. You develop the design of the bed taking into account the individual needs and characteristics of the child (if any), the dimensions and stylistic orientation of the room.
3. You can independently test the strength of the bed structure during the manufacturing process and ultimately be sure that jumping on the mattress will not end in breaking the furniture.
4. You save significantly if you compare the cost of a home-made bed with store prices;
5. You get real pleasure by creating furniture for your son or daughter with your own hands.

Deciding on the design of the bed

The easiest way to make a classic crib is a frame, four legs, a headboard and a mattress. However, this model carries a minimal functional load - it simply provides a sleeping place for the child. Suitable for a spacious bedroom of one child, where there is already a spacious closet, and there is no need for additional places for storing things.

If the children's room does not have impressive dimensions, it would be more practical to supplement the bed structure with drawers or even a chest of drawers. This will allow you to more effectively organize the space in the room.

Even more functional is the loft bed. It allows you to raise the child’s sleeping place to the second tier, and below organize a wardrobe, table, bookshelves or a sports corner - depending on the child’s needs. However, such a design will require serious skills in the process of creating a bed. If you are just starting your journey in furniture making, it is better to stick to the first two options.

Finally, bunk beds are especially popular. This is a great way to comfortably accommodate two children in a small children's room. However, as in the case of a loft bed, it is not easy to make a two-story bed yourself and before starting work it is better to carefully weigh your strengths and capabilities.

Let's look at further instructions using the example of creating a bed with drawers. This is a fairly simple option and is suitable even for a person with minimal skills in creating furniture. At the same time, such a crib is practical and functional.

Required materials and tools

It is better to make a bed from solid wood. This is the most environmentally friendly and safe material, allowing you to create truly durable furniture. Light wood MDF works well. Heavy solid wood is not suitable for children's beds, since this furniture has to be moved and rearranged often.

In addition to MDF blanks, you will also need wooden beam for lamellas. For this part of the bed, choose an elastic material (for example, plywood is suitable in this case, but chipboard is not).

In addition to wood and plywood, you will need:

• special metal corners;
• screws and other fasteners of various diameters;
• guide elements for drawers;
• drill;
• electric jigsaw;
• Grinder;
• sandpaper;
• paper tape.

In addition, at the final stage of making the bed, you will also need a mattress. When choosing, do not skimp, give preference to a high-quality orthopedic model. Important nuance– although the mattress is installed last, it is better to purchase it in advance and make a drawing of the bed based on its actual dimensions.

Let's start production

Before starting work, decide on a drawing of the bed model that is suitable for you. Next, get to work.

Decor variations

A simple bed with drawers usually does not imply any special design solutions. As a decoration, you can choose original handles for drawers or make a carved headboard. You can also paint the bed in your chosen color, highlighting the design of the rest of the children's room. The option of painting the headboard or legs, using special decorative stickers and other decorative elements is allowed.

Emphasize classic design children's bedroom can be done using carved legs or sides.

If you have certain skills, the sides of such a bed with drawers can be made in the form of the walls of a car, resulting in a car bed that is popular today. For girls, you can make a sleeping place in the form of a carriage. However, many young representatives of the fair sex also like the options with cars, except that the colors are better in more “feminine” colors.

Carved handrails and slats can be used to decorate a bunk bed. More difficult option– decorate a bunk bed or loft bed in the form of a castle or fortress, or a tree house. To do this, it is enough to cut out the facade of the appropriate type and paint it in accordance with the sketch.

Whatever bed you decide to create with your own hands, remember: you are creating furniture for a child. Approach the task responsibly. There are no small details in creating furniture - the safety of those who will use this furniture depends on the grinding of every corner and the strength of every joint. Put maximum effort, care and love into your product - and such a bed will give your child good dreams, and you - joy and satisfaction from the work done.

Video: Wooden crib

50 photos of crib ideas:

If a person has a desire, basic skills, as well as a set simple tools, then a do-it-yourself children's bed is not a problem for him. Yes, you can buy ready-made furniture for your child. But there is an option to save money by making a sleeping place for your baby yourself.

In this article we will tell you how to make a crib for a child yourself. preschool age and show you the whole process step by step.

Making a baby crib with your own hands must comply with the following rules:

• Only natural and environmentally friendly materials;
• the crib has a reliable design;
• free from potentially traumatic corners, protrusions, and parts;
• the surface is perfectly smooth, without roughness or chips;
• corresponds to the child’s parameters;
• completely eliminates the possibility of falling.

Benefits of making a bed yourself

The advantages of a homemade children's bed are:

1. Confidence in the materials used to make the crib. In the case of store-bought products, information about the parameters is not always available.
2. The design is developed according to your own parameters and requirements.
3. During the manufacturing process of the product, you can independently verify its strength, which is especially important in the case of children jumping on a mattress.
4. A baby crib made by yourself significantly saves the family budget.
5. You get incomparable pleasure from furniture made for your child yourself.

Bed design options: choose the right one

There are a large number of modifications of sleeping places, but we will focus on the most popular:

• with and without sides;
• loft bed;
• transformer.

Below we will look at the process of making a regular baby crib with legs with a headboard and footboard with our own hands. Option without tricks, doesn’t mean anything special complex work and it won't take much time.

Also, having understood the principle of operation, you can, by analogy, make a crib for a newborn, baby or child over 3 years old.

How to make a crib with your own hands

Before purchasing materials and tools for a children's bed made of plywood or other materials, you need to carefully consider the entire process of creating this piece of furniture and understand the basic elements.

1. Frame. The parameters depend on the size of the bed and the mattress used accordingly. The main material for production is dry board.
2. Lamels. The product supports the mattress and is a base in the form of lattice strips or plywood with ventilation holes.
3. Sidewalls. Lattice or solid safety fences.
4. Byltsa. Made from solid wood, chipboard or plywood. The height at the foot is traditionally lower than that of the headboard element.
5. Legs. Can be made independently or purchased in a store. They can be integral with the main structure or attached separately.

Drawings and diagrams

Start work by preparing a drawing according to which the structure will be cut. Below we offer you options for ready-made drawings and diagrams that you can use.

To view the drawing in full size, right-click on the image and select the “open image in new tab” command.

Materials and tools

The outer parts of the bed, visible to the eye, are made of MDF. You can choose wood based on the finances at your disposal. If the bed will often be moved or carried, you should give preference to light wood species. A children's bed can also be made from plywood, which is installed on a frame. You will need edged and planed lumber in the form of boards and beams, whole or in sections.

The following tool is also required for the job:

• saw for woodworking;
• milling cutter;
• grinding machine;
• drill;
• corner;
• self-tapping screws;
• fasteners;
• screeds;
• screwdriver.

The first stage is making the legs

We start with the legs, making blanks from the timber. You can also contact a lumber shop and order them to be made according to your dimensions. You need 4 pieces of each length.

Remember! The legs of the bed are longer at the head of the bed and shorter at the foot of the bed.

We connect the blanks using glue and self-tapping screws.

The screws should be well sunk into the wood and covered with putty. After the product has dried, all irregularities and joints are sanded.

We begin work by making the legs. To do this, take the blanks in pairs, glue them evenly and twist them with self-tapping screws.

These are ready-made crib legs. All that remains is to putty it.

Second stage - holes for dowels

To install the backrests, a groove should be made. Its width is 2.5 cm. Use a router or, if you don’t have one, contact a carpenter. It’s easier to take ready-made dowels by choosing a drill of the appropriate diameter.

Having previously measured the exact distance and level on the planks, drill holes for dowels at the ends of the planks. Monitor the immersion depth of the drill using a beacon attached to it.

The third stage - the head and foot of the crib

From a 2.5 * 5 cm board, you need to cut boards of equal length to fill the headboard and footboard with them. Next, insert them into the groove filled with glue.

We drill a hole in the leg, then mark the middle, attach and align the back. Then we mark the areas where the holes for the dowels will be drilled. We put a little adhesive material in them and insert the back. The canvas should fit tightly, avoid gaps.

We attach the legs to the back of the crib.

The same process is duplicated on the other leg. If an unaesthetic joint is formed, it is masked with a board, secured with self-tapping screws.

Finished footboard and headboard of the crib

The fourth stage is the basis for the mattress

We take two boards 5*10 cm along the length of the mattress, use self-tapping screws and glue to attach a plank that is 10 cm shorter. We drill holes closer to the edge. The hats should ultimately be completely hidden.

Installation of crib slats

We cut the slats and attach them to the slats with a stop in 10 cm increments along the width of the mattress with two self-tapping screws. The holes for fasteners are covered with putty and subsequently sanded.

Fastening the cross bars

In the outer slats you need to make cutouts for the legs of the crib.

Fifth stage - assembling the crib

Now we finally eliminate all defects in the wooden parts of the crib (chips, cracks, etc.) by sealing with putty, then sanding until smooth.

The next step is priming and painting all the parts.

All. All we have to do is connect the backrests and the base for the mattress. Our crib, which we made for the baby ourselves, is ready!

For fastening, use furniture fittings that are sold in stores.

Ideas for decorating a baby crib

After finishing the main work, it's time to start decorating to give the bed a finished look.
In terms of decorative implementation, the sides provide a wide field for action. The decoration can be an original ornament or pattern, a print depicting your favorite characters. Using harmless acrylic or silicone paint in this case will allow you to add unusual touches.

You can upholster the product with furniture fabric, having previously made the pattern a couple of centimeters larger than the dimensions of the parts. The material is leveled to avoid bubbles and secured with a furniture stapler. This option will look harmonious on a do-it-yourself crib for a girl.

You can paint the crib with a special furniture paint that is safe for humans.

Coating the frame with varnish can also be classified as a finishing method. To do this, it is recommended to use products that dry quickly. All parts are sanded and polished.

So, we have looked at the process of making a baby crib with our own hands. If anything remains unclear or you have any questions, ask in the comments below. We will definitely answer them.

The modern market offers a sufficient selection of children's furniture, including cribs.

A child will be able to sleep in his crib for a maximum of four years, then he will have to change it to a more adult-sized version. And the price of furniture is not cheap at all, so there is an option to make a comfortable crib with your own hands. It's not as difficult as it seems at first glance!

It is not at all necessary to be a professional in this field and spend a lot of time on assembly.

The first thing you need to do is purchase exclusively high-quality environmentally friendly materials and take this issue seriously, considering the entire upcoming process.

The photo of a do-it-yourself crib shows how to make one for a five-year-old child, but all of the specified parameters can be increased to a larger size.

The benefits of a self-made bed

When you go to a furniture store, you can find a lot of options for children's beds from various materials(plastic, fiberboard, chipboard, wood). The best material, of course, wood, which provides safety, durability and is the most durable option.

A finished wooden crib is quite expensive. Not every family can afford such costs, especially since it will only last a few years.

The cost of a hand-made design will be several times less and has the following positive aspects:

• reliability in use of the design. Children often love to play and jump on the bed, and you won’t have to worry that it will break under the load;
• You can make a strictly individual bed. Which will suit the style and interior of the children's room and has individual sizes;
• The creation process will help you spend time with interest with your child, who will probably not refuse to help his parents.

Purchasing the necessary material and preparing tools

To begin with, you should carefully prepare the room in which the planned process will take place. If it will take place directly in the room, it is wise to cover the floor and furniture with film, since a lot of dust and sawdust will appear during the work.

Then you need to competently prepare an exact drawing of a crib for a newborn with your own hands, or find a suitable sketch on the Internet.

You will need a number of materials:

• self-tapping screws of different diameters;
• wooden panels for furniture;
• special wheels with which the drawers will be pulled out;
• a sheet of plywood or a metal grid for the base of the bed;
• sandpaper for processing cuts.

The set of tools is absolutely minimal: an electric jigsaw, an angle grinder and a regular drill.

It is important to first, before drawing up the drawing, measure the mattress that will be placed in the crib, since later it will be more difficult to choose the right size!

Step-by-step making of a baby crib with your own hands

Having decided on the size and design of the children's bed, you can begin the actual work:

• All necessary markings are carefully applied with a pencil, not forgetting about the edges.
• Then, using a jigsaw, you need to carefully cut out all the parts.
• Needs to be cut metal corners the right size, immediately drilling holes in them (maximum five), into which self-tapping screws will be mounted in the future.
• To make the base of the mattress, you need to screw the corners to the bottom of the sides.
• Having conveniently placed the crib on its side, you need to assemble all the necessary parts.
• Use sandpaper to smooth out possible irregularities and sharp corners.
• There are spacious drawers at the bottom of the furniture.
• It is wise to coat the crib with varnish or a similar coating, which will give it an aesthetic appearance.
• The final stage: place the mattress on the bottom of the bed and spread the bed linen.

Accessories for baby's bed

A crib for a small family member must be equipped with sides that will serve as protection for the baby. It’s very easy and fun to sew the sides of a crib with your own hands.

Their most popular type is the option that protects all four sides and is secured with regular ties.

Note!

When choosing fabric for children's bumpers, you should opt for lightweight materials with not too “pretentious” patterns, since the baby will have to study the patterns around him for quite a long time.

A cape over the crib protects the child from insects and possible drafts. It is also possible to make an original canopy for the crib with your own hands by choosing the right fabric.

It is better to buy two different cuts (quite wide for the allowance) natural material: weightless, light, summer fabric and denser fabric for winter. First, you need to purchase a frame that attaches to the bed. Then draw a pattern according to size, cut out the parts and sew them in the right places.

With imagination and minimal skills, you can make an original, unique crib that will serve and delight both you and your baby for several years!

DIY crib photo

Note!

Note!

It is important for parents that their children grow up in a comfortable atmosphere, and that their sleep is not threatened. If a person has a minimum set of tools and basic knowledge, That DIY children's bed it won't be difficult to do, provided you have it on hand photo, product sketch, blueprints. The arrangement of such furniture is simple.

Layout and dimensions of a crib for a newborn

Parents know that a crib for a baby, especially between the ages of one and four years, is especially important, because the child sleeps a lot. The right furniture– this is the key to a comfortable sleep. For small apartments, such a crib in a nursery can also replace a playpen.
It is easy to make in two to three days and provides all the subtleties and nuances for the child’s comfort.

The right furniture is the key to a comfortable sleep

The first step is to figure out what elements this structure will consist of.

• Mattress. It is selected based on the weight and age of the baby, so it is better not to make it yourself, but simply purchase it in a store. The purchased mattress was developed jointly with orthopedists and takes into account all the body’s needs for comfortable sleep and the correct formation of the child’s spine. Mattresses are divided into two main types: spring block and without springs. The version with springs can be on an independent spring block (each spring is placed in a separate bag made of non-woven material and the load on such a mattress is distributed pointwise) and on a dependent spring block (the springs are combined metal frame, and the weight of the sleeper is distributed evenly over the entire area of ​​the product).

  

  Comfortable hanging baby cot

  These mattresses are best purchased for children over 5 years old. And for children with low weight, products on a springless block are recommended, where the frame itself, as a rule, consists of polyurethane foam or foam rubber and, depending on the degree of rigidity, can be supplemented with coconut coir or other materials.

• Frame. This element is made based on the size assumed by the mattress of the sleeping place. The material for it is most often planed board.
• Lamels. These parts of the product are designed to support the mattress from below and are strips inserted into the furniture frame. They form a lattice with a distance between each other of about 5 cm (for ventilation of the mattress).

  

  Making a baby crib with your own hands, master class with drawings and photos

• Sidewalls. They provide a barrier to prevent the child from falling out of the crib. Depending on the wishes of the parent, they can be high or low, solid or carved. Byltsa (back of the product). At the headboard their height will be higher than at the feet.

  

  Drawings and photos of a crib for a master class

• Legs. This element can be made with your own hands or purchased at a specialized furniture fittings store. They can be initially planed on the sides of the crib, or they can be screwed to it.

Crib drawing

Deciding on the model

In a children's room, several types of beds are most often used:

• With drawers
• Loft bed
• Bunk bed (if there are two kids in the room)

If the premises of the children's room do not allow placing in the room big bed, but you need a compact model that can save square meters, then it is better to choose a design with drawers. Drawers are used to store bedding, toys, children's things and anything that does not fit in a child's chest of drawers or nightstands.

Baby cot on two levels for small children

In order for the furniture to turn out to be of high quality, it is necessary to select environmentally friendly materials for its manufacture. The ideal material would be thick plywood or wood. MDF or chipboard, which are popular in the furniture industry, should not be purchased for the manufacture of structures due to the adhesives used in the manufacture of materials. Chemical substances can negatively affect the baby’s body, causing allergies.

Original bed for stylish interior children's room

Advice: It is not recommended to make a crib smaller than 1.5 * 0.6 meters, but you should not make it larger than 1.8 * 0.7 meters. A child will quickly outgrow a small crib, and if you make it too big, the baby will not feel comfortable in it.

The base for such furniture is made solid; it can be purchased ready-made, or you can simply use a sheet of plywood instead.
Its dimensions should be based on the size of the purchased mattress. A lattice can be purchased as a base, but plywood can be used as an option, since baby weight not that big.

The ideal material would be thick plywood or wood.

Wooden shield. It is better to use wood with a low resin content, for example, birch, linden. The size of the shield is recommended to be two meters long, 60 centimeters wide and about 3 centimeters thick.

On the furniture board, the future outline of the workpiece is drawn with chalk according to the dimensions of the sketch. If it is necessary to make holes on the sides of the structure, then they are drawn using a champagne glass or using a regular glass.

Furniture board and plywood can be cut by purchasing them in a store. As a rule, most stores have such services, but it is necessary to provide dimensions in millimeters and patterns. It is recommended to make the cut yourself using a jigsaw, but if you don’t have a jigsaw at hand, you can cut the materials with a regular saw.

Furniture board and plywood can be cut by purchasing them in a store.

After cutting, all wooden elements are sanded using sandpaper so that the materials from which the crib is made do not scratch the baby’s delicate skin.

If it is not possible to find angles made of aluminum, then they are cut from aluminum profile. The details of the bed must correspond to the sketch drawings. And the length of the corner from the profile should match the length of the side back of the furniture. These fasteners have holes for inserting self-tapping screws. The sides are attached with corners to the bed frame or plywood base, and this structure is tightened with eight self-tapping screws.

Original children's bed in the shape of a car for a boy

Initially, the parts are attached on one side, then the future workpiece is turned over on side. According to the diagram, you should periodically check the order of fastening of the elements and the location of the parts. To ensure that the product is stable and strong, watch out for distortions and displacements of parts relative to each other. The bed walls are attached to each other and pulled together; if there are no holes in the walls, then they are made using a drill.

The frame part of the product is ready, it’s time to assemble the back, which will be located above the child’s head. If desired, it can be made in any shape, the main thing is that this piece of furniture fully fulfills its function, that is, protects the baby from injury.

Carved wooden crib for a newborn baby

Very often, small children raise their heads up in their sleep, so the sides here should be at least 10 centimeters in height. Another benefit of high sides and headboards is that they prevent toys and bedding from being thrown out of the bed.

Original baby crib for a boy

We make a headboard: we take a furniture board, from it, if desired, you can make a carved back that looks beautiful and noble or decorate it. The design of the headboard and backrest at the feet should match so that the design looks organic.

We make a headboard: we take a furniture board, from it, if desired, you can make a carved back that looks beautiful and noble or decorate it.

We screw the legs to the bed body itself, which we purchase at a furniture fittings store. We do this using long-length self-tapping screws.

All elements of the bed frame are additionally carefully polished, right down to the slots and cutouts, so that the child does not get hurt by putting his fingers in the slot.

Tip: A smooth sanded surface can be achieved using a drill with an attachment or a grinding machine.

Decorated, polished backrests are attached to a frame frame. So that the fasteners are not visible, they are drilled from below, pointing the drill upward. Cutting holes should be as careful as possible, because this part is easy to damage. We make the hole for the tie ourselves; it will be difficult to make it in this place with a drill. If the wood used to make the crib is soft, the hole will easily break through.

So that the fasteners are not visible, they are drilled from below, pointing the drill upward

The configuration of the crib suggests that the storage boxes are not attached to the bed frame, but have the form of roll-out cabinets. Drawers should be equipped with wheels so that the storage container can be rolled out.

Stylish wooden crib for a baby

If the apartment owner decides to change the configuration of the crib so that the drawers can be pulled out, then a transverse rail is attached to the bottom of the workpiece, and the product itself will stand on the side slats. In this case, the sidewalls are made higher than previously planned by several centimeters, equal to the height of the drawers. The drawer itself is placed on guides.

Wooden crib for a bright and airy room

For the boxes, we take plywood with a thickness of 1.2 cm, cut out the bottom and walls of the box, and tighten it together with self-tapping screws. Additionally, the box is glued, because the things in the box carry a load on the structure. We attach the wheels to the bottom of the assembled box.

Bright spacious room with a cot

The legs on the bed, if you decide to make them yourself, are made from leftovers furniture board or from scraps of timber square shape. Attach the legs to the furniture frame with self-tapping screws.

For the boxes, we take plywood with a thickness of 1.2 cm, cut out the bottom and walls of the box, and tighten it together with self-tapping screws.

Decorating the bed

When the work is completed, it is recommended to give the product a finished look. It is recommended to pass it upholstery fabric for furniture. First, parts 2–3 centimeters larger than the main parts are cut out of the fabric and overlocked so that they do not fray. The fabric is fastened with a furniture stapler, and its sections are hidden inside the crib so as not to spoil the aesthetic appearance of the structure. During decoration, the fabric is stretched to prevent creases, folds and bubbles from appearing.

A crib for the smallest family member and a small bedroom

Another finishing option would be to varnish the crib frame, headboard, and backrest at the feet. To do this, it is recommended to use quick-drying water-based varnishes. Treatment with stain will be more environmentally friendly for furniture in a children's room. It is recommended to first sand and polish all parts using a drill with an attachment.

For decorative look drawers, their fronts make them bright MDF panels or LDPS in blue, pink, light yellow, lilac and other colors.