Zte axon 7 прошивка. Какие прошивки есть у нас

Last Updated on February 20, 2018: Added the latest firmware based on Android 7.1.1 Nougat for ZTE Axon 7. Enjoy the latest collection of ZTE Axon 7 Stock Firmware.Here we will list all the Stock Firmware for ZTE Axon 7 which comes out of

Here we will list all the Stock Firmware for ZTE Axon 7 which comes out of box based on Android 6.0 Marshmallow. In this ZTE Axon 7 Stock Firmware collection, we have listed all the Stock Android 6.0 Marshmallow and Android 7.0 Nougat for ZTE Axon 7 with all OTA and FULL Stock ROM updates. You can flash the Stock Firmware on ZTE Axon 7 using the guide below. Flash the Stock Firmware on ZTE Axon 7 using the below guide on How to Install ZTE Axon 7 Stock Firmware Collections. In this list we will update all the region ZTE Axon 7 Stock Firmware Collections.

About ZTE Axon 7:

– The Best Sounding and Listening Smartphone with HiFi Audio – highest quality sound reproduction and amplification of music/video playback and record.
– Optimized camera experience takes great still images and video with minimal manual operation
– Larger camera, 20 MP rear and 8 MP front facing cameras, for higher quality images – Fingerprint customization – launching apps, taking pictures for security and to launch other application
– Beautiful Industrial Design with Continuous Smooth Surface that feels great in your hands

How to Install Official ZTE Axon 7 Stock Firmware:

Pre-Requisite:

• This Marshmallow Update Firmware B03 is Supported for ZTE Axon 7 A2017G.
• You must be running Stock ROM and Stock Recovery to install this firmware.
• Your Phone should be fully Stock before trying this version.
• Please back up all data in your phone to your PC or any other devices to prevent accidental data lost
• Please make sure your phone has enough battery charge or is connected to a charger before upgrade.
• It will take 15 minutes approximately to complete the upgrade. Please be patient during the process and do not power off your phone.

STEPS FOR HOW TO UPDATE Official ZTE Axon 7 Stock Firmware

1. First of all, Download the B03 STOCK Firmware for ZTE Axon 7
2. Now move the download file from your PC/Laptop to Smartphone
3. Now Place the file on the Root of your SD Card or Internal memory.
4. In your phone -> Go to Settings -> Software Update.
5. If you have placed file properly in root of your SD Card, the device will detect automatically for the update.
6. It will upgrade in few minutes.
7. Enjoy the latest B03 Update Firmware for ZTE Axon 7.

List of ZTE Axon 7 Stock Firmware Collections:

Android 8.0 Oreo: Update ZTE Axon 7 to Android 8.0 Oreo with MiFavor UI 5.2 Beta ROM

MORE COLLECTIONS OF ZTE AXON 7 STOCK ROM

Few more Stock ROM for ZTE Axon 7 shared by XDA Senior member raystef66 .

How to Install Official ZTE Axon 7 Stock Firmware

Note:

1. This Method is only for Axon 7 A2017U users.

PRE-REQUISITE

1. This will work on ZTE Axon 7 A2017U, Don’t Try this in Any other device.
2. Charge your phone up to 80% or 70%.
3. You will loose the original ROM or any CUSTOM ROM if you already installed on your phone. So make sure to before doing this step.
4. You can also
5. Download all the Zip files from below and Place it in your phone’s root of internal memory.

Steps for How To Install ZTE Axon 7 Stock Firmware

Method 1

• update.zip
• Copy the update.zip file to your sd card.
• Navigate to the phone Settings -–>Update and Click on the menu button.
• .It will automatically recognise the zip file
• Tap on install button to start installation process automatically.
• Wait until update installation completes.

Method 2

• Download the ZIP file and rename it to update.zip
• Enable ‘USB debugging’ and ‘OEM unlock ’ option from Settings –> Developer options –>. (To enable Developer Options, go to About phone and tap the Build Number 7 times.)
• Switch off and Reboot your device into Recovery Mode (press Volume down + Power Button key’s together)
• Select “Apply update via SDcard”.
• Select the zip file and wait until the installation process completes.
• Reboot the device after installation.
• Done!!!

I Hope you successfully Flashed Stock Firmware on ZTE Axon 7 Smartphone from our guide. Please comment your queries and feedbacks.

ZTE Axon 7 - это брендовый китайский смартфон, который получил 5 баллов по производительности. Здесь Вы сможете скачать прошивки (под всех операторов, firmware ROM), узнать, как сделать сброс настроек или получить рут, Также есть инструкции на ЗТЕ. Этот смартфон - высокопроизводительный. На борту имеет - Qualcomm Snapdragon 820 MSM8996, 2150 МГц

Root на ZTE Axon 7 64Gb

Как получить root для ZTE Axon 7 64Gb см. в инструкции ниже.

Ниже представлены универсальные программы для получения рут-прав для девайсов на Qualcomm Snapdragon

• (нужен ПК)
• (Рут при помощи ПК)
• (популярная)
• (root в один клик)

Если права суперпользователя (root) не удалось получить или не появилась программа (можно самому установить) - задайте вопрос в теме . Возможно, понадобится прошивка кастомного ядра.

Характеристики

1. Тип: смартфон
2. Операционная система: Android 6.0
3. Тип корпуса: классический
4. Материал корпуса: металл управление: экранные nкнопки
5. Тип SIM-карты: nano SIM
6. Количество SIM-карт: 2
7. Режим работы нескольких SIM-карт: попеременный
8. Вес: n175 г
9. Размеры (ШxВxТ): 75x151.7x7.9 мм
10. Тип экрана: цветной AMOLED, сенсорный
11. Тип сенсорного экрана: мультитач, nемкостный
12. Диагональ: 5.5 дюйм.
13. Размер изображения: 2560x1440
14. Число пикселей на дюйм (PPI): 534
15. Автоматический поворот экрана: есть
16. Устойчивое к царапинам стекло: есть
17. Фотокамера: 20 млн пикс., светодиодная nвспышка
18. Функции камеры: автофокус, оптическая стабилизация
19. Диафрагма: F/1.8
20. Запись видеороликов: есть
21. Фронтальная камера: есть, 8 млн пикс.
22. Аудио: MP3
23. Разъем для наушников: 3.5 мм
24. Стандарт: GSM 900/1800/1900, n3G, 4G LTE, LTE-A Cat. 6
25. Интерфейсы: Wi-Fi 802.11ac, Wi-Fi Direct, Bluetooth, USB, NFC
26. Спутниковая навигация: nGPS/ГЛОНАСС
27. Cистема A-GPS: есть
28. Процессор: Qualcomm Snapdragon 820 MSM8996, 2150 МГц
29. Количество ядер nпроцессора: 4
30. Видеопроцессор: Adreno 530
31. Объем встроенной памяти: 64 Гб
32. Объем оперативной памяти: 4 Гб
33. Слот для карт памяти: есть, объемом до 128 Гб (совмещен со слотом для второй SIM-карты)
34. Емкость аккумулятора: 3250 мА/ч
35. Тип разъема для зарядки: USB Type-C
36. Функция быстрой зарядки: есть управление: голосовой набор, голосовое управление
37. Режим полета: есть
38. Датчики: освещенности, приближения, гироскоп, считывание отпечатка пальца
39. Фонарик: есть
40. Особенности: стекло Corning Gorilla Glass 4; аудио - двойной чипсет Hi-Fi: AK4961 + AK4490
41. Дата nанонсирования: 2016-05-26

»

Прошивки для ZTE Axon 7 64Gb

Официальная прошивка Android 6.0 [стоковый ROM-файл] -
Кастомная прошивка ZTE -

Прошивка ЗТЕ Axon 7 64Gb может быть осуществлена несколькими способами. Если здесь еще не загружен файл прошивки, то создайте тему на форуме, в разделе , специалисты помогут Вам, и добавят прошивки. Не забудьте в теме написать отзыв на 4-10 строк о смартфоне, это важно. Официальный сайт ZTE, к сожалению, не поможет решить эту проблему, а мы - решим бесплатно. Эта модель ЗТЕ имеет на борту Qualcomm Snapdragon 820 MSM8996, 2150 МГц, соответственно существуют такие способы перепрошивки:

1. Recovery - перепрошивка прямо на устройстве
2. Специальная утилита от производителя, либо

Какие есть кастомные прошивки (firmware)?

1. CM - CyanogenMod
2. LineageOS
3. Paranoid Android
4. OmniROM
5. Temasek’s

Проблемы и недостатки смартфона от ZTE и, как их исправить?

• Если Axon 7 не включается, например, видите белый экран, висит на заставке или вовсе только мигает индикатор оповещений (возможно, после зарядки).
• Если завис при обновлении / завис при включении (нужна перепрошивка, 100%)
• Не заряжается (обычно, проблемы с железом)
• Не видит сим-карту (симку)
• Не работает камера (по большей мере, аппаратные проблемы)
• Не работает сенсор (зависит от ситуации)

Hard Reset для ZTE Axon 7 64Gb

Инструкция, как сделать Hard Reset на ZTE Axon 7 64Gb (сброс настроек). Рекомендуем ознакомиться с наглядным руководством, которое называется на Android. .

Коды для сброса настроек (откройте номеронабиратель и введите их).

1. *2767*3855#
2. *#*#7780#*#*
3. *#*#7378423#*#*

Hard Reset через Recovery

1. Выключите устройство-> зайдите в Recovery
2. «wipe data/factory reset»
3. «yes - delete all user data»-> «Reboot System»

Как зайти в Recovery?

1. зажмите и удерживайте Vol(-) [громкость вниз], либо Vol(+) [громкость вверх] и кнопку включения (Power)
2. появится меню с лого Android. Всё, Вы в Recovery!

Сброс настроек на ZTE Axon 7 64Gb можно сделать и совсем простым способом:

1. Настройки-> Восстановление и сброс
2. Сброс настроек (в самом низу)

Как сбросить графический ключ

Как сбросить графический ключ, если Вы его забыли, и теперь не можете разблокировать свой смартфон ZTE. На модели Axon 7 64Gb ключ или PIN-код можно убрать несколькими способами. Снять блокировку можно и через сброс настроек, код блокировки будет удален и отключен.

1. Сброс граф. блокировки -
2. Сброс пароля -

Update: Axon 7 official Android 8.0 Oreo official Oreo Beta firmware update has been leaked with several new features. Here we have the full stock firmware update files for the same. See how to download and install official Axon 7 Oreo OTA update. It comes with new firmware build number ZTE A2017GV1.3.0B01 for the ZTE A2017G variant. We also have the Oreo update for ZTE A2017V variant as well.

is now live with Axon 7 is the most popular device from the emerging smartphone manufacturer ZTE. The device became quite popular for its stunning hardware specification. Nos, the device is again in news lately as ZTE promised Android 8.0 Oreo update for Axon 7 and all of its variants. As per the rumors, the official stable update is due this month. However, the Oreo beta update for Axon 7 is already available and one of the users have already captured and released it for us. Here we will show you how to download and update Axon 7 to Android 8.0 Oreo official MiFavor firmware.

The Oreo update comes in as a Beta build for the Axon 7. Hence, you may encounter some bugs as well. It is wise to first see what’s working with the update. However, the plus point is that it is based on stock MiFavor UI. The developer has made some changes, got rid of the bugs, and made the firmware as stable as possible.

The fingerprint sensor is now working and fixed the display issues with some device. It is based on firmware build number ZTE A2017GV1.3.0B01 and A2017V3.0.0B01; which is the first build for Oreo beta. You will also find some packages which can fix the radio on A2017G and A2017U models.

You may also like to watch the video:

Download Android 8.0 Oreo for Axon 7 ZTE A2017GV1.3.0B01

Though the below full stock firmware files will work just fine, here we have another official leaked Oreo Beta for the ZTE Axon 7 A2017G variant with firmware build number A2017GV1.3.0B01.

• Axon 7 Oreo full stock firm updates | Download ZTE A2017GV1.3.0B01

Bugs and h ow to fix it?

• Magisk may not pass Safetynet? (ctsProfile: False). Download and flash this safetynet fix zip .
• Google play store may show as Uncertified device. The above zip will fix that. Your device is now certified.
  

How do I disable force encryption?

Warning: Doing so will doing so, YOU’LL HAVE TO PERFORM A WIPE DATA including everything from Internal storage. Take a full backup.

/system/vendor/etc

Improve battery life:

If AdAway cannot install hosts file, Open Magisk -> Settings and select Systemless hosts.

How to install Axon 7 Android 8.0 Oreo ZTE A2017GV1.3.0B01 firmware update?

This is a ported ROM which can be flashed using the

Requirements:

• The Bootloader on the Axon 7 needs to be unlocked. See how to of your Android phone.
• Make sure you have installed the latest TWRP recovery on your Axon 7 device. and see .
• Fully charge your device’s battery.
• Take a full Nandroid backup of your data from TWRP.
• Your device warranty may be void after flashing custom ROM and we won’t be held responsible.

How to install guide:

• Go through the requirements from above.
• Download the Axon 7 Oreo ROM from above. Also download latest Magisk zip.
• Transfer all the files to device storage.
• Reboot into TWRP recovery.
• Take a full Nandroid Backup.
• So go to Wipe > Advanced wipe > and select partitions such as system, data, cache, etc. Do not wipe internal storage. Otherwise, do a factory reset from TWRP.
• Flash the new Oreo ROM for Axon 7.
• Wipe cache and Dalvik cache.
• Flash the latest Magisk zip if you want to root.
• Reboot to system.

How to update Axon 7 ZTE A2017V to Android 8.0 Oreo?

Downloads for ZTE A2017V:

The following firmware builds are extracts of ZTE A2017V. However, it also works with other Axon 7 variants like A2017G and A2017U. Other variants need to be tested.

• Axon 7 Oreo update | ZTE_A2017V3.0.0B01-2 MiFavor | Latest stock firmware
• Axon 7 Oreo old package | ZTE_A2017V3.0.0B01

You may also like the latest stock firmware update.

Getting radio/network working on A2017G and A2017U:

Some devices may not receive radio or network. So you will need to flash the Nougat modem onto Android 8.0 firmware. This is compatible with A2017G and A2017U models.

You can either flash it using or you can simply extract the firmware zip above, and replace the NON-HLOS.bin file with the new modded model zip from below before installation.

Disclaimer: This is a beta update and may not work perfectly on every device. We won’t be responsible for any of your actions.

These are the instructions for installing Axon 7 via EDL mode:

Step 1: The first thing you will need is a Windows PC, USB cable, drivers installed, and Axon 7 with proper variant.

Step 2: Install the MiFlash tool on your PC from above. You will need the latest Axon 7 USB drivers which will be installed automatically.

Step 3: It is time to reboot device into EDL mode. To do so, first turn off your device. Make sure it isn’t connected to PC just yet.

Step 4: Now plug in your device to PC such that the volume down key (or volume up) and power keys are pressed at the same time.

Step 5: Your device should now enter the EDL mode. This is also termed as the download mode.

Step 6: Make sure you see to device as “Qualcomm HS-USB QDLoader 9008”

Step 7: Now run the MiFlash tool and browse through the PC and choose the Axon 7 Oreo folder you’ve downloaded.

Step 8: Click Refresh on MiFlash tool and you will see your device listed.

Step 9: Go ahead and flash the Axon 7 Oreo firmware.

Step 10: Wait until installation is done. Your device will automatically reboot into system once done.

That’s it enjoy the Oreo update on Axon 7.